FAN COIL ACTUATOR 0-10V - KNX - IP20 - 4 MODULES - DIN RAIL MOUNTING
Code:
GWA9141
Range: Home&Building Pro
Home & Building PRO system
Home & Building PRO system
Wired system based on the KNX international standard protocol, suitable for advanced automation solutions for residential and non-residential solutions. Thanks to the ThinKnx platform, Home&Building Pro solutions can be integrated with other Gewiss systems and with third-party systems (such as video door entry systems, IP cameras, burglar alarms, entertainment systems, etc.). All functions can be controlled via voice assistants (Siri and Alexa) and managed both locally and remotely using touchscreen devices, app and PC. In particular, ThinKnx allows functions and devices from Gewiss ZigBee wireless Smart Home solution to be integrated into a KNX system.
Technical Info
Information
Download
Software
Certificates
Supply voltage
100-240 V ac - 50-60 Hz
No. input channels
2
Valves and fan output
0-10V, max 10 mA
Fan relay contacts
6 A (AC1) 250 V ac
Additional relay contacts
16 A (AC1) 250 V ac
No. DIN modules
4
Ware Number
85364190
EQUIPMENT AND NOTES
CHARACTERISTICS: actuator for the command of fan coils with 0-10V proportional heating/cooling valves and up to 3 fan levels (or with 0-10V proportional output) in 2- and 4-pipe systems. Equipped with an additional progrmmable relay (eg: to control a heating/cooling battery or as a switching output) and two potential-free inputs for windows contact or temperature probe sensor (es: GWA9145) and condensate monitoring. The device has frontal Test buttons (for a simple check of fan levels and heating/cooling switching during the setup steps) and 9 signalling leds for the operation status. Regulation is via an external control variable or the integrated ambient thermostat (in the latter case it is necessary to add the temperature probe sensor). To be configured via ETS software.
APPLICATIONS: KNX timed thermostats and thermostats that can be used with the fan coil actuators GWA9140 and GWA9141:
- THERMO ICE KNX surface-mounting thermostat GW16976CB/CN/CT: for controlling all the functions of the fan coil actuators (that shall be configured to work with kind of used controller "remote controller") and commanding the fan in both automatic and manual mode.
- THERMO ICE KNX flush-mounting thermostat GW16974CB/CN/CT: attention - this thermostat can only be used in KNX-SYSTEM mode (configurable with ETS). For controlling the fan coil actuators (that shall be configured to work with kind of used controller "remote controller") and commanding the fan in automatic mode only - i.e. the thermostat conveys the valve opening request (0..100% byte) to the fan coil actuators, which automatically define the fan speed; the fan speed cannot therefore be controlled via the thermostat.
- Other KNX SYSTEM timed thermostats, thermostats and probes: attention - these models permit only limited use of the control functions of the fan coil actuators (that shall be configured to work with kind of used controller "remote controller"), so their validity should be evaluated for the individual situation on the basis of the application requisites.
- KNX EASY timed thermostats, thermotats and probes: attention - these models cannot be used to control the fan coil actuators.
NOTES: equipped with coupling terminal for connection to BUS.
APPLICATIONS: KNX timed thermostats and thermostats that can be used with the fan coil actuators GWA9140 and GWA9141:
- THERMO ICE KNX surface-mounting thermostat GW16976CB/CN/CT: for controlling all the functions of the fan coil actuators (that shall be configured to work with kind of used controller "remote controller") and commanding the fan in both automatic and manual mode.
- THERMO ICE KNX flush-mounting thermostat GW16974CB/CN/CT: attention - this thermostat can only be used in KNX-SYSTEM mode (configurable with ETS). For controlling the fan coil actuators (that shall be configured to work with kind of used controller "remote controller") and commanding the fan in automatic mode only - i.e. the thermostat conveys the valve opening request (0..100% byte) to the fan coil actuators, which automatically define the fan speed; the fan speed cannot therefore be controlled via the thermostat.
- Other KNX SYSTEM timed thermostats, thermostats and probes: attention - these models permit only limited use of the control functions of the fan coil actuators (that shall be configured to work with kind of used controller "remote controller"), so their validity should be evaluated for the individual situation on the basis of the application requisites.
- KNX EASY timed thermostats, thermotats and probes: attention - these models cannot be used to control the fan coil actuators.
NOTES: equipped with coupling terminal for connection to BUS.
services
Do you need technical assistance?
Contact us to get the answers to your questions: plant, regulatory or product questions.
Find Gewiss
Are you looking for an installer or a sales point?
Find your trusted dealer or installer.
You can enter the Gewiss world by consulting the sites available for each country, differentiated by language, services, and catalogue offerings
Choose your country
Check your country
You are browsing the International site but it seems that you are in {{country}}. Do you want to update your country?
Yes, go to the website for {{country}}
No, stay on the International site