40 CDi Range Flush-mounting distribution boards and enclosures
The widest offer of flush-mounting distribution boards and enclosures currently available on the market. Seven families designed to offer advanced solutions in the residential and commercial sector, also available in halogen-free material. Versions from 2 to 72 modules, degree of protection from IP40 to IP55 and special versions for plasterboard. The range includes also two Multimedia Enclosures: Full Version (54 modules) and Compact Version (36 modules).
YOUR SEARCH
40 CDi - Decorative enclosures - IP40
Smoked transparent door
Decorative enclosures pre-arranged for housing terminal blocks
ACCESSORIES SUPPLIED: 6.5 M module-covering profiles co-ordinated with the colour of the enclosure front (for 4, 8 and 12-module enclosures - 1 profile; for 24-module enclosures - 2 profiles; for 36-module enclosures- 3 profiles), circuit labels, mortar guard element in cardboard supplied as standard in the packs and packed with paper banding. NOTES: Dispersible power calculated according to CEI 23-49. CHARACTERISTICS: Module-covering profiles can be divided into 1/2 module elements, using scissors. Mortar guard element assembled by pressing on the base opening. Thermo-pressure with ball equal to 70°C. IP40 guaranteed even with open door, in the case of wall-embedded installation using devices of at least IP40 and the module-covering profiles supplied. Bottoms of 8 and 12 module enclosures can be assembled side-by-side using combined coupling element GW40425. Enclosures composed by front cover;Front of the enclosure and DIN rail frame fully compatible with the bottom of the previous decorative flush mounting enclosures 40CDi Range DIN frame, terminal blocks and back plastic bottom. INSTALLATION: for the possible enclosure-terminal block combinations, refer to the summary "COMPATIBILITY OF FLUSH-MOUNTING ENCLOSURES WITH BIPOLAR AND UNIPOLAR TERMINAL BLOCKS" in the selection guides of 40CDì range.
Blank door
Decorative enclosures predisposed for housing terminal blocks -White
ACCESSORIES SUPPLIED: 6.5 M module-covering profiles co-ordinated with the colour of the enclosure front (for 4, 8 and 12-module enclosures - 1 profile; for 24-module enclosures - 2 profiles; for 36-module enclosures- 3 profiles), circuit labels, mortar guard element in cardboard supplied as standard in the packs and packed with paper banding. NOTES: Dispersible power calculated according to CEI 23-49. CHARACTERISTICS: Module-covering profiles can be divided into 1/2 module elements, using scissors. Mortar guard element assembled by pressing on the base opening. Thermo-pressure with ball equal to 70°C. IP40 guaranteed even with open door, in the case of wall-embedded installation using devices of at least IP40 and the module-covering profiles supplied. Bottoms of 8 and 12 module enclosures can be assembled side-by-side using combined coupling element GW40425. Enclosures composed by front cover;Front of the enclosure and DIN rail frame fully compatible with the bottom of the previous decorative flush mounting enclosures 40CDi Range DIN frame, terminal blocks and back plastic bottom. INSTALLATION: for the possible enclosure-terminal block combinations, refer to the summary "COMPATIBILITY OF FLUSH-MOUNTING ENCLOSURES WITH BIPOLAR AND UNIPOLAR TERMINAL BLOCKS" in the selection guides of 40CDì range.
Complementary items for decorative enclosures
Front covers and relative functional frames with DIN rail for decorative enclosures
ACCESSORIES SUPPLIED: 6.5M module-covering profiles co-ordinated with the colour of the enclosure front (for 4, 8 and 12-module enclosures - 1 profile; for 24-module enclosures - 2 profiles; for 36-module enclosures- 3 profiles), service labels. NOTES: dispersible power calculated according to IEC 60670-24. CHARACTERISTICS: Module-covering profiles can be divided into 1/2 module elements, using scissors. Thermo-pressure with ball equal to 70°C. IP40 guaranteed even with open door, in the case of wall-embedded installation using devices of at least IP40 and the module-covering profiles supplied. Front of the enclosure and DIN rail frame fully compatible with the bottom of the previous decorative flush mounting enclosures 40CDi Range.
Back-mounting boxes for decorative enclosures designed to house a terminal block
ACCESSORIES SUPPLIED: Mortar guard element in cardboard with clip-fixing on the opening of the back-mounting box - supplied as standard and packed with paper banding. CHARACTERISTICS: there is an identification code on the back-mounting box, along with the word "up" to aid installation.
40 CDKi - Protected modular enclosures and distribution boards - IP40
Smoked transparent door
Enclosures predisposed for terminal block housing with extractable frame - White RAL 9016
CHARACTERISTICS: GW40601, provided without the door and with the DIN rail fixed directly on the back plate. Thermo-pressure with ball equal to 70 °C. Flush-mounting boxes in 12 and 18 modules can be assembled side-by-side through the coupling tool code GW40425. ACCESSORIES SUPPLIED: Module masks, circuit labels. For GW40604, GW40605 and GW40608, self-adhesive labels to be filled out for certification according to standard CEI 23-51. NOTES: Dissipated power calculated according to CEI 23-49. Upon request, starting from the 8 modules version, flush-mounting boxes and cabinets (including frame and DIN rails) can be supplied separately. INSTALLATION: For the possible enclosure-terminal block combinations, refer to the summary "COMPATIBILITY OF FLUSH-MOUNTING ENCLOSURES WITH BIPOLAR AND UNIPOLAR TERMINAL BLOCKS" in the selection guides of 40CDì range.
Enclosures equipped with 80 A IP20 bipolar screw terminal block and extractable frame - White RAL 9016
CHARACTERISTICS: Thermo-pressure with ball equal to 70°C. Bottoms of 12 and 18 module enclosures can be assembled side-by-side using combined coupling element GW40425. ACCESSORIES SUPPLIED: module masks, circuit labels. Self-adhesive labels to be filled out for certification according to standard CEI 23-51. Insulated bipolar screw 80A - IP20 terminal blocks to be installed on the frame before wiring. NOTES: dispersible power calculated according to CEI 23-49. Upon request, flush-mounting boxes and cabinets (including frame and DIN rails) can be supplied separately.
Distribution boards with windowed panel and extractable frame predisposed for terminal block housing - White RAL 9016
ACCESSORIES SUPPLIED: Module masks, circuit labels. Self-adhesive label to be filled out for certification according to standard CEI 23-51. NOTES: Dissipated power calculated according to CEI 23-49. Upon request, flush-mounting boxes and cabinets (including frame and DIN rails) can be supplied separately. CHARACTERISTICS: Lead sealable and removable panels with windows. Thermo-pressure with ball equal to 70 °C. Flush-mounting boxes can be assembled side-by-side through the coupling tool code GW40425. INSTALLATION: For the possible enclosure-terminal block combinations, refer to the summary "COMPATIBILITY OF FLUSH-MOUNTING ENCLOSURES WITH BIPOLAR AND UNIPOLAR TERMINAL BLOCKS" in the selection guides of 40CDì range.
Distribution boards with windowed and 80 A IP20 bipolar screw terminal block and extractable frame White RAL 9016
ACCESSORIES SUPPLIED: module masks, circuit labels. Self-adhesive label to be filled out for certification according to standard CEI 23-51. Insulated bipolar screw 80A - IP20 terminal blocks to be installed on the frame before wiring. NOTES: dispersible power calculated according to CEI 23-49. Upon request, flush-mounting boxes and cabinets (including frame and DIN rails) can be supplied separately. CHARACTERISTICS: removable and plumbable panels with windows. Thermo-pressure with ball equal to 70°C. Bottoms of enclosures can be assembled side-by-side using combined coupling element GW40425.
Blank door
Enclosures predisposed for terminal block housing and extractable frame - White RAL 9016
ACCESSORIES SUPPLIED: Module masks, circuit labels. For GW40884, GW40885 and GW40888, self-adhesive labels to be filled out for certification according to standard CEI 23-51. NOTES: Dissipated power calculated according to CEI 23-49. Upon request, starting from the 8 modules version, flush-mounting boxes and cabinets (including frame and DIN rails) can be supplied separately. CHARACTERISTICS: Thermo-pressure with ball equal to 70 °C. Flush-mounting boxes in 12 and 18 modules can be assembled side-by-side through the coupling tool code GW40425. INSTALLATION: For the possible enclosure-terminal block combinations, refer to the summary "COMPATIBILITY OF FLUSH-MOUNTING ENCLOSURES WITH BIPOLAR AND UNIPOLAR TERMINAL BLOCKS" in the selection guides of 40CDì range.
Enclosures equipped with 80 A IP20 bipolar screw terminal block and extractable frame - White RAL 9016
ACCESSORIES SUPPLIED: module masks, circuit labels. Self-adhesive labels to be filled out for certification according to standard CEI 23-51. Insulated bipolar screw 80A - IP20 terminal blocks to be installed on the frame before wiring. NOTES: dispersible power calculated according to CEI 23-49. Upon request, flush-mounting boxes and cabinets (including frame and DIN rails) can be supplied separately. CHARACTERISTICS: thermo-pressure with ball equal to 70°C. Bottoms of 12 and 18 module enclosures can be assembled side-by-side using combined coupling element GW40425.
Distribution boards windowed panels and extractable frame predisposed for housing the terminal blocks- White RAL 9016
ACCESSORIES SUPPLIED: Module masks, circuit labels. Self-adhesive label to be filled out for certification according to standard CEI 23-51. NOTES: Dissipated power calculated according to CEI 23-49. Upon request, flush-mounting boxes and cabinets (including frame and DIN rails) can be supplied separately. CHARACTERISTICS: Lead sealable and removable panels with windows. Thermo-pressure with ball equal to 70 °C. Flush-mounting boxes can be assembled side-by-side through the coupling tool code GW40425. INSTALLATION: For the possible enclosure-terminal block combinations, refer to the summary "COMPATIBILITY OF FLUSH-MOUNTING ENCLOSURES WITH BIPOLAR AND UNIPOLAR TERMINAL BLOCKS" in the selection guides of 40CDì range.
Distribution boards with windowed panels and 80 A IP20 bipolar screw terminal block and extractable frame White RAL 9016
ACCESSORIES SUPPLIED: module masks, circuit labels. Self-adhesive label to be filled out for certification according to standard CEI 23-51. Insulated bipolar screw 80A - IP20 terminal blocks to be installed on the frame before wiring. NOTES: dispersible power calculated according to CEI 23-49. Upon request, flush-mounting boxes and cabinets (including frame and DIN rails) can be supplied separately. CHARACTERISTICS: removable and plumbable panels with windows. Thermo-pressure with ball equal to 70°C. Bottoms of enclosures can be assembled side-by-side using combined coupling element GW40425.
Distribution boards metal door - IP40
Distribution boards for brick walls equipped with bipolar terminal blocks - RAL 9016
ACCESSORIES SUPPLIED: module masks, circuit labels. Self-adhesive label to be filled out for certification according to standard CEI 23-51. NOTES: dissipated power calculated according to CEI 23-49. The antibacterial front kit is composed of frame, door, lock covers, opening handles. The kit includes also functional frame and DIN rails. CHARACTERISTICS: lead sealable and removable panels with windows. Thermo-pressure with ball equal to 70 °C. Flush-mounting boxes can be assembled side-by-side through the coupling tool code GW40425. INSTALLATION: the matching back box for brick walls or plasterboard walls must be ordered separately. For the possible enclosure-terminal block combinations, refer to the summary ""COMPATIBILITY OF FLUSH-MOUNTING ENCLOSURES WITH BIPOLAR AND UNIPOLAR TERMINAL BLOCKS"" in the selection guides of 40CDì range.
Flush-mounting back box for Antibacterial front kit - For brick wall
CHARATTERISTICS: equipped with tabs for fixing on a metal structure for lightweight and plasterboard walls. Locators to mark the wall along the edges of the back box. Back boxes can be coupled with the accessory GW40425. NOTE: GWT 850°C, according to EN 60695-2-11. INSTALLATION: the matching antibacterial front kit must be ordered separately.
40 CDKi GREEN WALL - enclosures and distribution boards for lightweight and plasterboard walls - IP40
Smoked transparent door
Modular enclosures and distribution boards with windowed panel and extractable frame predisposed for housing terminal blocks - White RAL 9016 - smoked door
CHARACTERISTICS: Lead sealable and removable panels with windows, except for code GW40605PM. Back plates equipped with tabs for fixing on a metal structure for lightweight and plasterboard walls. Locators to mark the wall along the edges of the back plate. Horizontal modularity using the joining element GW40425 for enclosure GW40605PM. Vertical modularity using the joining element GW40425 for boards GW40606PM-GW40609PM-GW40610PM-GW40611PM. NOTES: Dissipated power calculated according to CEI 23-49. Casing type H according to EN 60670-1, and type Ha according to IEC 60670-1. GWT 850°C, according to EN 60695-2-11, related to the green flush-mounting box. Upon request, flush-mounting boxes and cabinets (including frame and DIN rails) can be supplied separately. ACCESSORIES SUPPLIED: Self-tapping screws kit ø 4x45 mm with spacers for fixing frontal panels. INSTALLATION: For the possible enclosure-terminal block combinations, refer to the summary "COMPATIBILITY OF FLUSH-MOUNTING ENCLOSURES WITH BIPOLAR AND UNIPOLAR TERMINAL BLOCKS" in the selection guides of 40CDì range.
40 CDKI GREEN WALL - Home Networking enclosures
Multimedia enclosures
Multimedia enclosure compact version 36 DIN modules - White ral 9016 - Blank door
APPLICATIONS: multimedia Enclosures allow the distribution of the services through the apartment (e.g. internet, phone, satellite TV, etc.). The compact version is dedicated to small apartments with a small amount of services. FEATURES: the product is compliant to the CEI 306-2 Guide. The back box features plastic tab for an easier installation on metal frames and drywall panels. The product can be joint vertically with other enclosures of the the CDKi range (minimum size 36 DIN modules) through the GW40425 tool. ACCESSORIES SUPPLIED: the GW40390C is composed of 1 pc front cover with blank door, 1 pc detachable frame with 2 pcs perforated mounting plates (1 pc with 18 Keystone Jack slot), 2 m velcro roll h=16 mm, 4 pcs brackets, 4 pcs self-adhesive cable clips with cable ties, 5 pcs. RJ45 Cat.6 Keystone Jack. INSTALLATION: the product can be installed on both drywall and hollow bricks.
Multimedia enclosure compact version 54 DIN modules - White ral 9016 - Blank door
APPLICATIONS: multimedia Enclosures allow the distribution of the services through the apartment (e.g. internet, phone, satellite TV, etc.). The full version is dedicated to big apartments and villas with a huge amount of services and devices that have to be connected. FEATURES: the product is compliant to the CEI 306-2 Guide. The back box features plastic tab for an easier installation on metal frames and drywall panels. The product can be joint vertically with other enclosures of the the CDKi range (minimum size 36 DIN modules) through the GW40425 tool. ACCESSORIES SUPPLIED: the GW40390F is composed of 1 pc front cover with blank door, 1 pc detachable frame with 3 pcs perforated mounting plates (1 pc with 18 Keystone Jack slot), 3 m velcro roll h=16 mm, 6 pcs brackets, 6 pcs self-adhesive cable clips with cable ties, 6 pcs. RJ45 Cat.6 Keystone Jack, 6 pcs patch cord RJ45-RJ45 Cat.6 0,6 m, 1 pc thelephone splitter with 5 RJ11 socket and 5 pcs patch cord RJ11-RJ45, 1 pc multiple socket with 4 Italian/German socket 2P+T 16A. INSTALLATION: the product can be installed on both drywall and hollow bricks.
40 CDi - Protected enclosures - IP40
Blank door
Enclosures predisposed for terminal block - White RAL 9016
ACCESSORIES SUPPLIED: module masks, circuit labels, spare hinges. Self-adhesive label to be filled out for certification according to standard CEI 23-51. GW40657, GW40659, GW40661 door equipped with lock, with 2 triangular keys. NOTES: Dispersible power calculated according to CEI 23-49. CHARACTERISTICS: Thermo-pressure with ball equal to 70°C. INSTALLATION: for the possible enclosure-terminal block combinations, refer to the summary "COMPATIBILITY OF FLUSH-MOUNTING ENCLOSURES WITH BIPOLAR AND UNIPOLAR TERMINAL BLOCKS" in the selection guides of 40CDì range.
48 PTC - Combination watertight enclosures and boards - IP55
ACCESSORIES SUPPLIED: module masks, user labels, kit of self-tapping stainless steel screws Ø 4x32mm. mortar guard element in cardboard supplied as standard in the packs and packed with paper banding. NOTES: dispersible power calculated according to IEC 60670-24. CHARACTERISTICS: Thermo-pressure with ball equal to 70°C. pre-arrangement for combined coupling (both horizontal and vertical) via the feedthrough coupling device GW48026. Mortar guard element assembled by pressing on the base opening.
Combination board with smoked transparent door
Watertight flush-mounting combined board fitted for modular devices and for 2 flanges 85x75 mm for mounting IEC 309 standard socket-outlets - shockproof front - Grey RAL 7035
ACCESSORIES SUPPLIED: user labels, kit of self-tapping screws of Ø 4 x 32mm in stainless steel. mortar guard element in cardboard supplied as standard in the packs and packed with paper banding. NOTES: dispersible power calculated according to IEC 60670-24. Compatible with IEC 309 16A 10° angled receptacle. CHARACTERISTICS: Thermo-pressure with ball equal to 70°C. pre-arrangement for combined coupling (both horizontal and vertical) via the feedthrough coupling device GW48026. Mortar guard element assembled by pressing on the base opening.
Complementary items
Installation and coupling
Module cover profile in plastic Colours co-ordinated with 40CDi flush-mounting decorative enclosures
APPLICATIONS: for CDKi enclosures and boards from 12 modules upwards. Also suitable for 40 CDi decorative enclosures with 8 and 12 modules and for the Home Networking enclosure. NOTE: GWT 850° C according to EN 60695-2-11.
Anti-deformation bracket for walling base boxes of CDKi boards
ACCESSORIES SUPPLIED: fixing screws. The 80 A terminal blocks are equipped with N and E labels to be placed on the respective spaces to identify the poles. CHARACTERISTICS: GWT 960°C according to EN60695-2-11. INSTALLATION: for the possible enclosure-terminal block combinations, refer to the summary "COMPATIBILITY OF FLUSH-MOUNTING ENCLOSURES WITH BIPOLAR AND UNIPOLAR TERMINAL BLOCKS" in the selection guides of 40CDì range.
ACCESSORIES SUPPLIED: fixing screws. CHARACTERISTICS: the adapter is pre-drilled for the correct assembly of the terminal block and pre-cut to allow installation also in enclosures with a 12 M modular step. INSTALLATION: used to expand the number of the possible enclosure-terminal block combinations, refer to the summary "COMPATIBILITY OF FLUSH-MOUNTING ENCLOSURES WITH BIPOLAR AND UNIPOLAR TERMINAL BLOCKS" in the selection guides of 40CDì range.
Bipolar terminal blocks with support for enclosures for surface-mounting small distribution boards german standard
APPLICATIONS: GW66745 specific for emergency push-buttons. Possibility of assembly on Q-DIN boards, PTC junction boxes, flanged lids and panels. ACCESSORIES SUPPLIED: gasket and mounting screws.
Others
Triangular security key - for 40CDi enclosures protected with a blank door
APPLICATIONS: for all the 40 CDKi with door, for the decorative 40 CDi with 24 and 36 modules and for the Home Networking enclosure. ACCESSORIES SUPPLIED: 2 keys. NOTES: All the keys and relative locks with the same product code are identical.
Security lock for surface-mounting small distribution boards german standard
Gewiss uses its own technical cookies and those of third parties to ensure the proper functioning of the site and for statistical purposes and, subject to your consent, also profiling cookies to offer you a personalized experience and targeted advertising based on the analysis of your navigation. By clicking on "Accept all" you will give your consent to all profiling cookies.
If you close this banner by clicking on the "X", you can continue browsing without profiling cookies being installed. You can always change your preferences, through the functions offered by Gewiss, navigating the "Cookie Policy" page from the link in the footer on every page of the Site. For further information please visit our Privacy Policy and Cookie Policy.
Gewiss and some third parties make use of the cookies present on "gewiss.com".
Gewiss uses its own technical cookies and those of third parties to ensure the proper functioning of the site and for statistical purposes and, subject to your consent, also profiling cookies to offer you a personalized experience and targeted advertising based on the analysis of your navigation. By clicking on "Allow all" you give your consent to all profiling cookies
Manage preferences:
+
Strictly necessary cookies
always active
These cookies are essential to enable you to move around the website and use its features: setting privacy preferences, signing in or filling in forms. Without these cookies, the services you request through the use of our website cannot be delivered correctly. Strictly necessary cookies do not require your consent, in accordance with applicable law. You can configure your browser to block Strictly necessary cookies, but you may not be able to fully utilize all features of the website.
Analytics cookies get leveraged as well and they are considered as technical ones: these cookies allow you to understand how the Site is used. They do not collect information about your identity or any Personal Data. The information is processed aggregately and on anonymous base.
+
Profiling cookies
These cookies are installed after your consent, which you can give by using the features offered by our cookie banner, they are used to track your browsing (including off the Site) and understand your likes and dislikes, in order to be able to show you personalized advertising banners that are relevant to you while you are browsing.
Field required
Check that the e-mail is not already used or that all the fields have been enhanced
Check your email
The password must contain at least 6 and a maximum of 12 characters, a numeric character and a uppercase letter
Registration is successfully completed
Attention: User name and password do not match
Enter a valid email address
The value does not match
Data modification is successfully completed
To fill the form you must be logged. Please go to
login page
Mail sent successfully
Inscribed
Thank you!
Your request has been sent successfully
Authentication error
Error sending request
Please try again later!
User not found
Integration error
Please contact the administrator
You are already registered at the event
View card
Change Password is successfully completed
The password must contain at least 6 and a maximum of 12 characters, a numeric character and a uppercase letter
Please enter the mail in the appropriate field
Error sending request. Please try again later!
Saving in the list
Insert the name of the catalog
Expired
For the download of the file you have to choose a subtype during registration, go on modify profile and choose it!
For the download of the file you have to be a professionist installer or wholesaler. Upgrade your profile on my profile page!
For the download of the file you have to be a professionist installer or wholesaler, a designer or lighting designer. Upgrade your profile on my profile page!
GO
Verify code is expired, please try to login
The date must be of the indicated format
List
Created by
Select
Account not yet confirmed, please confirm the link we sent you by mail