CHARACTERISTICS: surface embossing of the lids to facilitate painting. External knurling of the base to improve mortar adherence. Pre-arrangement for combined coupling (both horizontal and vertical) via the joining element GW48051. Lid protected with heat-shrinking film that also contains the bag of fixing screws. Mortar guard element assembled by pressing on the base opening. ACCESSORIES SUPPLIED: ø3x25 mm screw kit for lid fixing. mortar guard element in cardboard supplied as standard in the packs and packed with paper banding. NOTES: for the inputs, remove the knockouts after cutting the relative tangs with scissors.
48 PT DIN - Junction and connection boxes for side-by-side assembly with DIN rail integrated on the back-mounting box Colour: White lid RAL 9016
APPLICATIONS: boxes with a built-in DIN rail on the back-mounting box, in accordance with regulations that require to fix by DIN rail the devices that disperse a certain amount of power inside the junction boxes (calculated in compilance with CEI 23-49). ideal for relocation of domotic equipment as actuators, power supplies, etc... CHARACTERISTICS: surface embossing of the covers to facilitate painting. External knurling of the base to improve mortar adherence. Pre-arrangement for combined coupling (both horizontal and vertical) via the joining element GW48051. Lid protected with heat-shrinking film that also contains the bag of fixing screws. Mortar guard element assembled by pressing on the base opening. ACCESSORIES SUPPLIED: Junction box GW48011 supplied with 5 internal separators. ø 3x25mm screw kit for lid fixing. Mortar guard element in cardboard supplied as standard in the packs and packed with paper banding. NOTES: for the inputs, remove the knockouts after cutting the relative tangs with scissors.
Complementary items
Protective shield for junction, connection and domotics boxes
CHARACTERISTICS: in technopolymer. Total protection during brick wall work, painting and finishing operations. Applying the protective shield beneath the lid, the dispersible power of the box is reduced by 2 W for GW48006, GW48007, GW48008, GW48010, GW48011, GW48006PM, GW48007PM, GW48008PM boxes and by 3W GW48009 and GW48009PM boxes. NOTES: clip fixing to speed up assembly and removal operations. Reusable.
Joining element for PT / PT DIN and PT DIN GREEN WALL boxes
NOTES: the use of the joining element makes it possible to create horizontal and/or vertical sets of boxes PT/PT DIN. For PT DIN GREEN WALL boxes, GW40425 element permits horizontal paths. GW48051 also for the box with transparent lid GW48126PM. GWT 850 °C according to EN 60695-2-11.
Internal separator for PT DIN and PT DIN GREEN WALL boxes
CHARACTERISTICS: the deep lids are ideal for passing from an exposed system to a chased one. They have a removable front plate and a frame for connecting with trunking. GWT 850 °C secondo EN 60695-2-11; max lid H = 66mm for boxes up to 392x152 and conduits with max Ø = 32mm.
APPLICATIONS: embedded fixing on the GW44720 support, for coupling with the DIN rail. NOTES: for the connection capacity, refer to the technical catalogue
Accessories for terminal blocks for side-by-side assembly
Support for fixing side-by-side terminal blocks on DIN rail
NOTES: ideal for applications on boxes of the 48 PT DIN range. CHARACTERISTICS: supports a combination of terminal blocks with maximum 12-way capacity. Possible combinations: 3xGW44704; 2xGW44706; 1xGW44704 + 1xGW44706; 1xGW44704 + 1xGW44708; Modular overall dimensions (width): 4.5 modules EN 50022.
Modular terminal blocks
Terminal blocks with indirect screw tightening - 450V - T 85°C - Transparent
APPLICATIONS: especially suitable for creating equipotential nodes. ACCESSORIES SUPPLIED: self-adhesive label for identification of electrical lines. NOTES: GW44676 equipped with feedthrough terminals. These allow the creation of cut-outs from the main cables which, unsheathed in the part concerned, are not interrupted.
Accessories for modular terminal blocks
Support for fixing modular terminal blocks on DIN rail
APPLICATIONS: for fixing the equipotential terminal blocks on the plates or directly on the base inside the junction boxes and watertight boxes. ACCESSORIES SUPPLIED: screws for fixing the adapter.
Plain lid
Junction and connection boxes for side-by-side assembly, for uprights - plain plumbable lid White RAL 9016
ACCESSORIES SUPPLIED: internal dividers, joint elements for combined assembly, self-adhesive symbol labels for circuit identification, and sealing screws. Mortar-proof paint protection shield in technopolymer with additional electro-acoustic insulation function, with central handles making it easier to pull it out. NOTES: applying the protective shield beneath the lid, the dispersible power of the box is reduced by 2W for GW48207 and by 3W for the GW48211 box. dispersible power calculated according to IEC 60670-24.
Deep lid
Junction and connection boxes for side-by-side assembly, for uprights - deep plumbable lid Grey RAL 7035
CHARACTERISTICS: the lid has a removable front plate and a frame for the connection with the trunking (max height = 66mm) and conduits (max Ø = 40mm). The frame is fitted for fixing the DIN rails (not supplied). Pre-arrangement EN 50022: GW48227 horizontal - 24 modules (2x12), vertical - 24 modules (2x12); GW48231: horizontal - 78 modules (26x3), vertical - 36 modules (12x3). ACCESSORIES SUPPLIED: internal dividers, joint elements for combined assembly, self-adhesive symbol labels for circuit identification, and sealing screws. Mortar-proof paint protection shield in technopolymer with additional electro-acoustic insulation function, with central handles making it easier to pull it out. NOTES: applying the protective shield beneath the lid, the dispersible power of the box is reduced by 2W for GW48227 and by 3W for the GW48231 box. dispersible power calculated according to IEC 60670-24.
Complementary items
Shockproof sealable plain lids for boxes for uprights - White RAL 9016 - IP44
CHARACTERISTICS: the lid has a removable front plate and a frame for connection with trunking (max h = 65mm) and conduits (max Ø = 40mm). The frame is fitted for fixing the DIN rails (not supplied). Pre-arrangement EN 50022: GW48267 horizontal 24 modules (2x12), vertical 24 modules (2x12); GW48271 horizontal 78 modules (26x3), vertical 36 modules (12x3) ACCESSORIES SUPPLIED: self-adhesive symbol labels for circuit identification, and plumbable screws.
Boxes with lid - IP40
Modular, protected, flush-mounting junction and connection boxes shockproof lid - White RAL 9016
ACCESSORIES SUPPLIED: self-adhesive symbol discs for the identification of circuits, kit of Ø 4x32mm stainless steel self-tapping screws, hinge for constrained lid opening. GW48662 Ready to house the DIN rail; space available: 14 modules. Mortar guard element in cardboard supplied as standard in the packs and packed with paper banding. CHARACTERISTICS: pre-arrangement for combined coupling (both horizontal and vertical) via the feedthrough coupling device GW48026. Mortar guard element assembled by pressing on the base opening. NOTES: for the inputs, remove the knockouts after cutting the relative tangs with scissors.
Boxes with lid - IP55
Modular, watertight, flush-mounting junction and connection boxes shockproof lid - Grey RAL 7035
ACCESSORIES SUPPLIED: self-adhesive symbol discs for the identification of circuits, kit of Ø 4x32mm stainless steel self-tapping screws, hinge for constrained lid opening. GW48672 pre-arranged to house a DIN rail. Space available: 14 modules. Mortar guard element in cardboard supplied as standard in the packs and packed with paper banding. CHARACTERISTICS: pre-arrangement for combined coupling (both horizontal and vertical) via the feedthrough coupling device GW48026. Mortar guard element assembled by pressing on the base opening. NOTES: for the inputs, remove the knockouts after cutting the relative tangs with scissors. The IP55 degree of protection is guaranteed with the lid closed and with installations on waterproof walls made of tiles or similar materials, without joints.
Boxes with transparent shockproof lid - IP55
Modular, watertight, flush-mounting junction and connection box transparent shockproof lid
ACCESSORIES SUPPLIED: self-adhesive symbol discs for the identification of circuits, kit of Ø 4x32mm stainless steel self-tapping screws, hinge for constrained lid opening. Mortar guard element in cardboard supplied as standard in the packs and packed with paper banding. CHARACTERISTICS: pre-arrangement for combined coupling (both horizontal and vertical) via the feedthrough coupling device GW48026. Mortar guard element assembled by pressing on the base opening. NOTES: for the inputs, remove the knockouts after cutting the relative tangs with scissors. The IP55 degree of protection is guaranteed with the lid closed and with installations on waterproof walls made of tiles or similar materials, without joints. APPLICATIONS: ideal for medical room applications where the earthing point must be inspectable.
Modular enclosures with smoked transparent door - IP55
ACCESSORIES SUPPLIED: module masks, user labels, kit of self-tapping stainless steel screws Ø 4x32mm. Mortar guard element in cardboard supplied as standard in the packs and packed with paper banding. Enclosures with back plastic bottom. CHARACTERISTICS: pre-arrangement for combined coupling (both horizontal and vertical) via the feedthrough coupling device GW48026. Mortar guard element assembled by pressing on the base opening. NOTES: dispersible power calculated according to IEC 60670-24.
Watertight flush-mounting combined board fitted for modular devices and for 2 flanges 85x75 mm for mounting IEC 309 standard socket-outlets - shockproof front - Grey RAL 7035
ACCESSORIES SUPPLIED: user labels, kit of self-tapping screws of Ø 4 x 32mm in stainless steel. Mortar guard element in cardboard supplied as standard in the packs and packed with paper banding. Enclosures with back plastic bottom. CHARACTERISTICS: pre-arrangement for combined coupling (both horizontal and vertical) via the feedthrough coupling device GW48026. Mortar guard element assembled by pressing on the base opening. NOTES: dispersible power calculated according to IEC 60670-24. Compatible with IEC 309 16A 10° angled receptacle.
APPLICATIONS: GW66745 specific for emergency push-buttons. Possibility of assembly on Q-DIN boards, PTC junction boxes, flanged lids and panels. ACCESSORIES SUPPLIED: gasket and mounting screws.
Spare parts
Protected shockproof lids for PTC junction boxes - White RAL 9016 - IP40
We use technical cookies for optimum navigation. By continuing, you agree to use cookies, otherwise you can disable them from your browser.
Field required
Check that the e-mail is not already used or that all the fields have been enhanced
Check your email
The password must contain at least 6 and a maximum of 12 characters, a numeric character and a uppercase letter
Registration is successfully completed
Attention: User name and password do not match
Enter a valid email address
The value does not match
Data modification is successfully completed
To fill the form you must be logged. Please go to
login page
Mail sent successfully
Inscribed
Thank you!
Your request has been sent successfully
Authentication error
Error sending request
Please try again later!
User not found
Integration error
Please contact the administrator
You are already registered at the event
View card
Change Password is successfully completed
The password must contain at least 6 and a maximum of 12 characters, a numeric character and a uppercase letter
Please enter the mail in the appropriate field
Error sending request. Please try again later!
Saving in the list
Insert the name of the catalog
Expired
For the download of the file you have to choose a subtype during registration, go on modify profile and choose it!
For the download of the file you have to be a professionist installer or wholesaler. Upgrade your profile on my profile page!
For the download of the file you have to be a professionist installer or wholesaler, a designer or lighting designer. Upgrade your profile on my profile page!
GO
Verify code is expired, please try to login
The date must be of the indicated format
List
Created by
Select
Account not yet confirmed, please confirm the link we sent you by mail
