Range: 40 CDI Range Flush-mounting distribution boards and enclosures
The widest offer of flush-mounting distribution boards and enclosures currently available on the market. Seven families designed to offer advanced solutions in the residential and commercial sector, also available in halogen-free material. Versions from 2 to 72 modules, degree of protection from IP40 to IP55 and special versions for plasterboard. The range includes also two Multimedia Enclosures: Full Version (54 modules) and Compact Version (36 modules).
IP40
IK08
650 °C
70 °C
Technical Info
Information
Download
Software
Certificates
Insulation classII (according to IEC 61140 standards)
ColourVarnished slate
Outer dim. LxHxD (mm)328x218x106
IP degreeIP40
InstallationFlush mounting enclosures
Dispersible power (W)24
Mechanical resistanceIK08
Rated voltage400V
Door colourSmoked Transparent
No. of modules EN 5002212+1
Rated current125 A
Glow Wire Test650 °C
For wallsBrickwall
Operating temperature-15 ÷ +60°C
Type of materialHalogen-free in compliance with EN 60754-2
Thermo-pressure with ball70 °C
StandardEN 60670-1 (CEI 23-48) IEC60670-24 CEI 23-49
ACCESSORIES SUPPLIED: 6.5 M module-covering profiles co-ordinated with the colour of the enclosure front (for 4, 8 and 12-module enclosures - 1 profile; for 24-module enclosures - 2 profiles; for 36-module enclosures- 3 profiles), circuit labels, mortar guard element in cardboard supplied as standard in the packs and packed with paper banding. NOTES: Dispersible power calculated according to CEI 23-49. CHARACTERISTICS: Module-covering profiles can be divided into 1/2 module elements, using scissors. Mortar guard element assembled by pressing on the base opening. Thermo-pressure with ball equal to 70°C. IP40 guaranteed even with open door, in the case of wall-embedded installation using devices of at least IP40 and the module-covering profiles supplied. Bottoms of 8 and 12 module enclosures can be assembled side-by-side using combined coupling element GW40425. Enclosures composed by front cover;Front of the enclosure and DIN rail frame fully compatible with the bottom of the previous decorative flush mounting enclosures 40CDi Range DIN frame, terminal blocks and back plastic bottom. INSTALLATION: for the possible enclosure-terminal block combinations, refer to the summary "COMPATIBILITY OF FLUSH-MOUNTING ENCLOSURES WITH BIPOLAR AND UNIPOLAR TERMINAL BLOCKS" in the selection guides of 40CDì range.