NEW
CONNECTED SWITCH ACTUATOR WITH ENERGY MEASUREMENT - 100-240V AC 50/60HZ - NO 16A (AC1) 240V AC - 1 MODULE - GLOSSY WHITE - SYSTEM PURA
Code:
GWC20859
Range: System Pura
Smart Home
Smart Home
The System Pura Smart Home offers a wide range of solutions to meet every need in residential and small commercial applications, for both new buildings and renovations. Through a single platform, the Home Gateway app, you can directly manage security, comfort and energy consumption of the building. The system, based on the ZigBee protocol, can be integrated into Google Home, Amazon Alexa, and IFTTT IoT platforms, enabling third-party device management and voice commands.
IP20
Technical Info
Information
Download
Software
Certificates
Colour
Glossy white
No. modules
1
Power supply
100 ÷ 240 V ac - 50/60 Hz
Radio connections
Zigbee (IEEE 802.15.4)
Power output Zigbee
10 dBm
Max Power consumption operation
1.8 W (100 V ac) - 3.2 W (240 V ac)
IP degree
IP20
Wiring terminals
With screw
Terminal tightening capacity stranded cables (mm²)
Max. 2.5
Terminal tightening capacity solid cables (mm²)
Max. 2.5
Working temperature
-5 ÷ +45 °C
Stocking temperature
-25 ÷ +70 °C
Relative humidity (non-condensative)
Max 93%
Standard
Directive RoHS 2011/65/EU + 2015/863, Directive RED 2014/53/EU, EN 60669-2-1, EN 60669-1, EN 301 489-1, EN 301 489-17, EN 300 328, EN IEC 63000
Category
1-channel actuator with energy meter
Measured sizes
Active power, energy consumed
Output contacts
1 NO 16 A (AC1) 240 V ac
Functions
Timed load control, measures consumption, disconnection of load after exceeding threshold.
Local control
Using front button
No. input channels
1 (for local command replication or sending additional Zigbee commands)
No. output channels
1
Max. length of AUX input cables
50 m (single lenght)
240 V ac Incandescent-halogen lamps
1920 W
240 V ac LED lamps
200 W
Loads piloted from electronic transf. 240 V ac
500 VA
Low-consumption lamps (compact fluorescent)
200 W (240 V ac)
Voltage sensor
93 V ac … 264 V ac
Current sensor
16 A
Precisione misura
2% F.S.
Input voltage
Mains supply voltage
Ware Number
85389099
EQUIPMENT AND NOTES
CHARACTERISTICS: 1-channel actuator for controlling loads with NO output contact under voltage and with measurement of power consumption and energy consumption (both measurements transmitted via ZigBee). Local button and LED for controlling and displaying the load status.
Controllable loads: incandescent and halogen lamps (240Vac): 1920W, LED lamps (240Vac): 200W, fluorescent lamps (240Vac): 200W, halogen lamps powered by electronic transformers (240Vac): 500VA. Generic loads (up to 16A).
Equipped with 1 input (electronic buttons, traditional buttons and switches, sensors, etc.) to replicate local load control or to send ZigBee commands and statuses.
APPLICATIONS: on/off and timed control of the load connected to the devices via a local button. The load can also be controlled via ZigBee from other devices connected to the network. Using the input, it is possible to add local lamp control points, ZigBee commands to other devices (on/off command, generic load command, scenarios) or send the status of the sensors to the ZigBee network.
Automatic load disconnection function: devices can be configured to disconnect the local load when a consumption (power) threshold defined during configuration is exceeded.
Controllable loads: incandescent and halogen lamps (240Vac): 1920W, LED lamps (240Vac): 200W, fluorescent lamps (240Vac): 200W, halogen lamps powered by electronic transformers (240Vac): 500VA. Generic loads (up to 16A).
Equipped with 1 input (electronic buttons, traditional buttons and switches, sensors, etc.) to replicate local load control or to send ZigBee commands and statuses.
APPLICATIONS: on/off and timed control of the load connected to the devices via a local button. The load can also be controlled via ZigBee from other devices connected to the network. Using the input, it is possible to add local lamp control points, ZigBee commands to other devices (on/off command, generic load command, scenarios) or send the status of the sensors to the ZigBee network.
Automatic load disconnection function: devices can be configured to disconnect the local load when a consumption (power) threshold defined during configuration is exceeded.
services
Do you need technical assistance?
Contact us to get the answers to your questions: plant, regulatory or product questions.
Find Gewiss
Are you looking for an installer or a sales point?
Find your trusted dealer or installer.
You can enter the Gewiss world by consulting the sites available for each country, differentiated by language, services, and catalogue offerings
Choose your country
Check your country
You are browsing the Albania site but it seems that you are in {{country}}. Do you want to update your country?
Yes, go to the website for {{country}}
No, stay on the Albania site