NEW
CONNECTED THERMOSTAT WITH HUMIDITY MEASURE - ZIGBEE - 100-240V AC 50/60HZ - NA 5A (AC1) 240V AC - 2 MODULES - GLOSSY WHITE - SYSTEM PURA
Code:
GWC20857
Range: System Pura
Smart Home
Smart Home
The System Pura Smart Home offers a wide range of solutions to meet every need in residential and small commercial applications, for both new buildings and renovations. Through a single platform, the Home Gateway app, you can directly manage security, comfort and energy consumption of the building. The system, based on the ZigBee protocol, can be integrated into Google Home, Amazon Alexa, and IFTTT IoT platforms, enabling third-party device management and voice commands.
IP20
Technical Info
Information
Download
Software
Certificates
Colour
Glossy white
No. modules
2
Power supply
100 ÷ 240 V ac - 50/60 Hz
Radio connections
Zigbee (IEEE 802.15.4)
Power output Zigbee
10 dBm
Max Power consumption operation
1.1 W (100 V ac) - 1 W (240 V ac)
IP degree
IP20
Wiring terminals
With screw
Terminal tightening capacity stranded cables (mm²)
Max. 1.5
Terminal tightening capacity solid cables (mm²)
Max. 1.5
Working temperature
-5 ÷ +45 °C
Stocking temperature
-25 ÷ +70 °C
Relative humidity (non-condensative)
Max 93%
Standard
Directive RoHS 2011/65/EU + 2015/863, Directive RED 2014/53/EU, EN 60730-2-9, EN 60730-2-7, EN 60730-1, EN 301 489-1, EN 301 489-17, EN 300 328, EN IEC 63000
Category
Thermostat
Installation
Flush mounting enclosures
Measured sizes
Temperature, humidity
Intervallo regolazione umidità
20 ÷ 90%
Output contacts
1NO/NC 5 A (AC1) 240 V ac
Functions
Heating and cooling control; algorithms for 2-way systems: two-point (On/Off) and proportional integral (PWM).
Type of display
LCD
Local control
Using 4 front button
No. input channels
1 external temperature sensor input (type NTC 10K, e.g. GW10800) with max. 10 m cable
Temperature adjustment range
T antigelo: +7°C, T protezione alte temperature: +35 °C, Setpoint riscaldamento: +8 ÷ +31 °C, Setpoint raffrescamento: +15 ÷ +34 °C
Ware Number
90321020
CE marking
Download
Conformity declaration
EQUIPMENT AND NOTES
CHARACTERISTICS: flush-mounted thermostat for controlling heating/cooling systems with manual temperature management and shutdown option. Control algorithms for two-way systems: two points (ON/OFF), proportional-integral (PWM). The thermostat can control a solenoid valve for heating or cooling via local contact or ZigBee. In the case of ZigBee control, the solenoid valve must be controlled via one of the following connected actuators: ZigBee GWA1521, GWA1522, GWA1523, GWC2x859, GWA1301. The thermostat is equipped with integrated temperature and humidity sensors. The thermostat has an input for an NTC sensor (GW10800 NTC sensors can be used) to measure the outside temperature (e.g., to compensate for the temperature measured locally by the thermostat or for protection in the case of underfloor heating/cooling).
APPLICATIONS: climate control (heating or cooling) of a residential unit or area; possibility to manage a daily or weekly heating/cooling profile via app. The device measures humidity; if a threshold (which can be defined during configuration) is exceeded, a dehumidification system can be activated via ZigBee and the measurement can be displayed/notified on the app.
Use in traditional non-connected systems: the connected thermostat can also be used in traditional non-connected systems. In this case, it does not need to be configured via the app, and the NTC sensor input can only be used to compensate for the temperature measured locally by the thermostat.
APPLICATIONS: climate control (heating or cooling) of a residential unit or area; possibility to manage a daily or weekly heating/cooling profile via app. The device measures humidity; if a threshold (which can be defined during configuration) is exceeded, a dehumidification system can be activated via ZigBee and the measurement can be displayed/notified on the app.
Use in traditional non-connected systems: the connected thermostat can also be used in traditional non-connected systems. In this case, it does not need to be configured via the app, and the NTC sensor input can only be used to compensate for the temperature measured locally by the thermostat.
services
Do you need technical assistance?
Contact us to get the answers to your questions: plant, regulatory or product questions.
Find Gewiss
Are you looking for an installer or a sales point?
Find your trusted dealer or installer.
You can enter the Gewiss world by consulting the sites available for each country, differentiated by language, services, and catalogue offerings
Choose your country
Check your country
You are browsing the Albania site but it seems that you are in {{country}}. Do you want to update your country?
Yes, go to the website for {{country}}
No, stay on the Albania site