Technische software

Programme de gestion et mise à jour automatique de logicielle GEWISS
APPLICATION MANAGER est un logiciel qui permet la gestion, le choix et la mise à jour de logiciel Gewiss. Le logiciel contient les descriptions, les formations visuelles et la présentation montrant le fonctionnement et les caractéristiques de chaque logiciel.

START est un logiciel qui permet la gestion et le choix de logiciel Gewiss, pendant l’installation, la mise à jour et la désinstallation. START peut détecter les logiciels installés et permet de les mettre à jour. Les logiciels non-installés peuvent être sélectionnés dans une simple et intuitive “Liste de propositions” qui aide l’utilisateur à choisir le logiciel le mieux adapté. START contient les descriptions, les formations visuelles et la présentation montrant le fonctionnement et les caractéristiques de chaque logiciel.

SINC est un logiciel simple d’utilisation permettant de mettre à jour tous les logiciels GEWISS. Pour utiliser SINC il suffit d’une simple connexion internet. SINC reconnaît si les logiciels installés sont à jour ou si ils doivent être mis a jour; la mise à jour de tous les logiciels, se fait par un simple click...

Le logiciel GWPBT-Q permet de façon simple et rapide de concevoir et de chiffrer les tableaux de distribution d’installation électrique basse tension. Les principales fonctions offertes par le logiciel (cet outil) sont: - dessin du schéma électrique, - choix des composants, - mise en enveloppe automatique ou manuelle, - vérification thermique, - schéma circuits auxiliaires, - schéma circuits de mesure, - chiffrage.

CADpro is an easy to use software for designing electrical systems for residential and service industry applications. The programme can be used independently (AutoCAD not required). It has a two-dimensional CAD engine with all the main AutoCAD commands (layer, grid, filters, block management etc.).

PRICE is an easy to use software programme for preparing cost estimates of electrical systems. The programme can be used as follows: - independently for making cost estimates from scratch; - by importing data from the Software GEWISS for making complete cost estimates.

Logiciel pour la certification et l'estimation des tableaux poure les chantiers, moles-campings et de distribution.

BUS allows to design and to budgeting BUS systems with this software is also possible to represent the planimetry and the device link scheme. Il program is composed by various sections: Dispositive scheme: In this window are showed all the device with their link that form the various function\scenery. In this section the user can insert new device and modify the links according to the rules of domotic systems.

CITY VISION allows to design and budgeting video intercom systems. With this software is also possible to create the planimetry and the system scheme. The program is composed by 3 sections: System tree: This section contains the system structure with: buildings, floors and flats and consequently the number and type of outdoor stations and video entryphones. To facilitate the creation of the video intercom system is available a simple WIZARD. Properties: This section shows the properties of the selected device in the system tree. Planimetry: The program creates automatically the system planimetry with the various device inserted in the system tree. The project documentation can be printed or exported in Word, Excel or Pdf format. The planimetry can be also exported in DXF format openable with AutoCad or CADpro.

Logiciel pour la conception des éclairages. Le logiciel PROLITE permet: - D’élaborer les pièces (à l’aide du progiciel de gestion) reproduites en plan ou transférées de d’autres logiciels de CAO, et de les compléter avec les relatifs matériels d’éclairage définis.

RESTART is an online software that can be used by any device connected to Internet (smartphones, tablets or PCs) with witch is possible to find the automatic reclosing devices ReStart. The program consists of: a search area where is possible to set various filters (voltage, current, etc., etc.) and a result area where the program will show the resulting GEWISS products and for each product is possible to export: the image, the technical data sheet and all the technical data.

JOINON is an online software that can be used by any device connected to Internet (smartphones, tablets or PCs) with witch is possible to find the charging device for electric vehicles . The program consists of: a search area where is possible to set various filters (voltage, current, power, etc., etc.) and a result area where the program will show the resulting GEWISS products and for each product is possible to export: the image, the technical data sheet and all the technical data.

BIM is an online software that can be used by any device connected to the Internet (smartphones, tablets or PCs) with which you can download the BIM models of GEWISS products. The program allows you to navigate within the GEWISS catalogue among the various: series, categories and subcategories, obtaining the 3D image of the product and its BIM model (* .RFA format) for Autodesk REVIT program.

Logiciel pour le Devis des coffrets

DOMO CENTER is an online software that can be used by any device connected to Internet (smartphones, tablets or PCs) with witch is possible to set up the flush-mounting system columns for distribution, H&B automation and data DOMO CENTER. The program consists of: a search area where is possible to set various filters (height, color, etc., etc.) and a set up area where the user can drag and drop the various panel in the selected board. At the end of the board configuration is possible to export: the material list, the front view and the 1:1 technical drawing.

ECOLED is an online software that can be used by any device connected to Internet (smartphones, tablets or PCs) with which is possible to calculate the payback coming from the replacement of traditional lighting luminaires with LED luminaries .

Online software for selection of the conduit according to the cables inserted
CONDUIT is an online software that can be used by any device connected to Internet (smartphones, tablets or PCs) with witch is possible to obtain the conduit according to the cables inserted. The program consists of: a cable area where is possible to select the cable type and a calculation area where is the program shows the right conduits for the cable inserted. At the end of the calculation, you can export the documentation including the material list and the technical data sheet and all the technical data.

Le configurateur MAVIL est un logiciel en ligne accessible depuis n’importe quel appareil connécté à internet (smartphone, tablette ou PC). Il permet de configurer son installation en chemins de câbles pour les applications intérieure et extérieure. Grâce à l’aide de plusieurs filtres, vous définirez la taille et la position du chemin de câbles ; le configurateur vous proposera le chemin de câbles Mavil adapté.Vous pourrez ensuite exporter cette configuration.

Devis coffrets et baies pour le câblage réseau
DATA CENTER est un logiciel en ligne qui peut être utilisé par tout appareil connecté à Internet (smartphone, tablette ou ordinateur) qui permet de configurer les coffrets et les baies pour le câblage réseau de la gamme DATA CENTER.

Plugin avec Gewiss produits pour le logiciel d'éclairage DIALux

AUTOCAD® Plugin contains the technical designs (1:1 scale) for the GEWISS products included in the catalogue, in this way is possible to create compositions or to insert the constructive details in a CAD project.

Plugin with Gewiss products for the lighting software Relux®

Plugin with Gewiss products for the lighting software Relux®

Plugin with Gewiss products for the design software REVIT®. REVIT® Plugin for BIM design with Gewiss products in order to use it in the software Autodesk Revit®, with the plugin will be possible to insert single Gewiss products or composition directly in the project.

DOMOTICS – ZigBee network management PC software
ZigBee Configurator allows to create and manage a ZigBee network and all the ZigBee devices connected.

HAPPY HOME Configurator allows to configure and customize the graphic interface and the connection parameters of the “HAPPY HOME” APP for the KNX domotic system. The configuration consists in importing the ETS or the Easy Controller project (for KNX or KNX Easy systems) into the HAPPY HOME Configurator software, creating the desired customizations and exporting into a format suitable for the mobile device (smartphone or tablet).

Easy controller est le software pour la configuration et la mise en place des installations KNX Easy de Gewiss constituées avec un maximum de 256 dispositifs. Il se rend nécessaire un PC et une interface d’accès au bus KNX (ex: interface KNX/USB GW90706S ou GW90706B) pour la connexion à tous les dispositifs Easy présents sur le bus.

Download the General ETS Database for all the KNX devices.

GRAPHICknx allows you to create and customize the graphical interface for Master ICE panels and the KNX home automation supervision “Base” and “Plus” software, using icons, pictures and planimetries. The configuration is carried out by importing the ETS file project and creating the association between the graphical icons and the group addresses of the KNX system.

GWTEST permet de garder le contrôle des dispositifs de réarmement automatique de la famille ReStart / AUTOTEST connectés à un BUS de communication. Il permet également de superviser un système d'éclairage d'urgence par le centre de contrôle NemoDin Plus.

Logiciel de mise à jour du micrologiciel de la centrale DMX GW85691 et de compilation des préconfigurations et des programmes DMX. Le logiciel DMX permet de réduire les temps de rentrée des données définissant les différents scénarios.

VCT Configurator est un software pour la mise en service d’installations vidéocitofoniches jusqu’à 160 appartements, 8 positions externes, 4 modules actuateurs auxiliaires, 4 sélecteurs vidéo. Le software permet de créer la connexion logique entre les différents dispositifs de l’installation sans besoin du procediment manuel “appel-réponse”.

DOMOTICS - PC software for managing IP cameras.
IP Cameras configurator allows to create a configuration file for the association of IP cameras with the Gewiss Home Automation supervisor Smart Gateway GWA9000.

Thanks to Smart Gateway APP, the management of the home automation system is simple and intuitive, with the possibility to control (even remotely) lighting, blinds and venetian blinds, scenarios, temperature and humidity of each room, burglar alarm system, video cameras.

The new Gewiss APP for local and remote management of the KNX system from mobile devices (Tablets, Smartphones). The APP allows you to control and display the lighting, roller shutters, Venetian blinds, configure and execute scenarios, adjust the temperature and humidity of each room, monitor energy consumption and manage the burglar alarm.

The APP allows to control and program THERMO ICE WiFi from Android mobile devices. With THERMO ICE APP you can manage, in a easy way, your heating/cooling system from your mobile device: you need a Gewiss THERMO ICE WiFi thermostat on your plant.

The APP allows to control and program THERMO ICE Wi-Fi from mobile devices.

Using the Wi-Fi ReStart APP, wherever and whenever you can monitor the operating status of the system including a ReStart or a ReStart Autotest device.

Gewiss TimerOn APP allows you to manage the digital time switches for the 90 TMR range, using Bluetooth or NFC interfaces.

Enter the era of electric mobility. JOINON is the application dedicated to electric mobility supporters that allows you to identify and search for charging stations and use the public top-up service.

The App allows you to control your I-CON charging station from mobile devices.