90 ReStart Serisi Otomatik tekrar kapama cihazları

CHARACTERISTICS: after RCCB has tripped, ReStart checks the insulation prior to the automatic reclosure. In the event of a fault (earth leakage), ReStart will not reset the circuit breaker but will continue to monitor the circuit every 2 minutes reclosing the circuit breaker when safe to do so. In the meantime the integrated configurable auxiliary contact will change state to indicate that the automatic reset did not take place.
Compatible with:
-GWD0953 WiFi Interface Module
-GW90992 ModBus RS485 interface module.
NOTE: the Autotest function automatically and periodically (every 28 days) tests the RCCB, without interrupting the electric power supply, thus maintaining the performance of the residual current protection over time.
230 V ac power supply, phase-neutral.
RCCB's type B[IR] and A[IR] Impulse Resistant presents greater resistance to untimely tripping in comparison to standard residual current circuit breakers. Immunity level 8/20µs: 3000A for IR type, 250A for standard type.

CHARACTERISTICS: after RCCB has tripped, ReStart checks the insulation prior to the automatic reclosure. In the event of a fault (earth leakage), ReStart will not reset the circuit breaker but will continue to monitor the circuit every 2 minutes reclosing the circuit breaker when safe to do so. In the meantime the integrated configurable auxiliary contact will change state to indicate that the automatic reset did not take place.
Compatible with:
-GWD0953 WiFi Interface Module
-GW90992 ModBus RS485 interface module.
NOTE: the Autotest function automatically and periodically (every 28 days) tests the RCCB, without interrupting the electric power supply, thus maintaining the performance of the residual current protection over time.
230 V ac power supply, phase-neutral.
RCCB's type A[IR] Impulse Resistant presents greater resistance to untimely tripping in comparison to standard residual current circuit breakers.
Immunity level 8/20µs: 3000A for IR type, 250A for standard type.
RCCB's type A[G] satisfy tripping requirements according to OVE E 8601 Austrian standard.
APPLICATION: due to the prolonged control over time and the lower control threshold for the insulation, the PRO version is recommended for extensive electrical systems, that are dated or subject to critical ambient conditions (e.g. humidity) that can even temporarily lower the system's insulation level.

CHARACTERISTICS: when the' RCCB switch trips, ReStart performs' the isolation check before the automatic reset. In the event of a ground fault, ReStart does not reset'the switch but continues to check the'system every 2 minutes until, once the safety conditions are restored, it resets the'switch. The auxiliary contact that can be configured and integrated in the meantime switches on to signal the failure of automatic resetting.
Coupled with: -WiFi interface
module GW90954 -ModBus RS485 GW90992 interface
module.
NOTE: the SELF-TEST function automatically and periodically (every 28 days) tests the RCCB without cutting off power to the'system to maintain the' efficiency of the RCCB protection over time.
Reinforced Immunity Type A[S], B[IR] and A[IR] circuit breakers are equipped with greater resistance to unexpected trips than standard RCCBs. Immunity level 8/20μs: 3000A for IR versions and S, 250A for standard versions.

CHARACTERISTICS: after RCCB has tripped, ReStart checks the insulation prior to the automatic reclosure. In the event of a fault (earth leakage), ReStart will not reset the circuit breaker but will continue to monitor the circuit every 2 minutes reclosing the circuit breaker when safe to do so. In the meantime the integrated configurable auxiliary contact will change state to indicate that the automatic reset did not take place.
Compatible with:
-GW90954 WiFi Interface Module
-GW90992 ModBus RS485 interface module.
NOTE: the Autotest function automatically and periodically (every 28 days) tests the RCCB, without interrupting the electric power supply, thus maintaining the performance of the residual current protection over time.
RCCB's type A[IR] Impulse Resistant presents greater resistance to untimely tripping in comparison to standard residual current circuit breakers. Immunity level 8/20µs: 3000A for IR type, 250A for standard type.
RCCB's type A[G] satisfy tripping requirements according to OVE E 8601 Austrian standard.

CHARACTERISTICS: residual current circuit breakers with periodical checks of the functions, without disconnecting the system from the power supply. Earth leakage protection always guaranteed, even during the test cycle. Integrated auxiliary contact.
NOTE: 2P autotest without Auto reclosing versions created for special applications in the commercial or industrial sectors.
RCCB's type A[IR] Impulse Resistant presents greater resistance to untimely tripping in comparison to standard residual current circuit breakers. Immunity level 8/20μs: 3000A for IR type, 250A for standard type.
RCCB's type A[G] satisfy tripping requirements according to OVE E 8601 Austrian standard.

CHARACTERISTICS: residual current circuit breakers with periodical checks of the functions, without disconnecting the system from the power supply.
Earth leakage protection always guaranteed, even during the test cycle. Integrated auxiliary contact.
NOTE: 4P autotest without Auto reclosing versions created for special applications in the commercial or industrial sectors. RCCB's type A[IR] Impulse Resistant presents greater resistance to untimely tripping in comparison to standard residual current circuit breakers. Immunity level 8/20μs: 3000A for IR type, 250A for standard type.
RCCB's type A[G] satisfy tripping requirements according to OVE E 8601 Austrian standard.

CHARACTERISTICS: after RCCB has tripped, ReStart checks the insulation prior to the automatic reclosure. In the event of a fault (earth leakage), ReStart will not reset the circuit breaker.
NOTE: the ARD must be supplied at 230 Vac phase-neutral.

CHARACTERISTICS: after RCCB has tripped, ReStart checks the insulation prior to the automatic reclosure.
In the event of a fault (earth leakage), ReStart will not reset the circuit breaker but will continue to monitor the circuit every 2 minutes reclosing the circuit breaker when safe to do so.
Compatible with:
-GWD0951 auxiliary contact
-GWD0953 WiFi Interface Module
-GW90992 ModBus RS485 interface module (only if already coupled with GWD0951 auxiliary contact).
NOTE: the ARD must be supplied at 230 Vac phase-neutral.

CARACTERÍSTICAS: cuando el interruptor diferencial dispara, ReStart controla el aislamiento antes de rearmar automáticamente. En caso de derivación a tierra, ReStart no rearma el interruptor pero continua controlando la instalación cada 2 minutos hasta que, reestablecidas las condiciones de seguridad, rearma el interruptor. El contacto auxiliar configurable e integrado, mientras tanto, conmuta para señalar la falta de rearme automático.
Compatible con:
módulo interface WiFi GWD0953.
módulo interface ModBus RS485 GW90992..
NOTA: El dispositivo de rearme debe alimentarse a 230 Vac fase-neutro.

CHARACTERISTICS: after RCCB has tripped, ReStart checks the insulation prior to the automatic reclosure. In the event of a fault (earth leakage), ReStart will not reset the circuit breaker.
NOTES. cannot be used with 4P RCCBs in 3 modules and type B RCCBs. the ARD must be supplied at 230 Vac phase-neutral.

CHARACTERISTICS: after RCCB has tripped, ReStart checks the insulation prior to the automatic reclosure. In the event of a fault (earth leakage), ReStart will not reset the circuit breaker but will continue to monitor the circuit every 2 minutes reclosing the circuit breaker when safe to do so.
Compatible with:
-GWD0951 auxiliary contact
-GWD0953 WiFi Interface Module
-GW90992 ModBus RS485 interface module (only if already coupled with GWD0951 auxiliary contact)
NOTES: cannot be used with 4P RCCBs in 3 modules and type B RCCBs. The ARD must be supplied at 230 Vac phase-neutral.

CHARACTERISTICS: after RCCB has tripped, ReStart checks the insulation prior to the automatic reclosure. In the event of a fault (earth leakage), ReStart will not reset the circuit breaker but willcontinue to monitor the circuit every 2 minutes reclosing the circuit breaker when safe to do so. In the meantime the integrated configurable auxiliary contact will change state to indicate thatthe automatic reset did not take place.
Compatible with
: -GW90945 WiFi Interface Module
-GW90992 ModBus RS485 interface module.
NOTES: they cannot be used with 4P RCCBs in 3 modules. 230 V ac power supply, phase-neutral.

CHARACTERISTICS: after RCBO has tripped, ReStart checks the insulation and the short circuit prior to the automatic reclosure.. In the event of a fault (earth leakage or short circuit), ReStart will not reset the circuit breaker.
NOTE: the ARD must be supplied at 230 Vac phase-neutral.

CHARACTERISTICS: after RCBO has tripped, ReStart checks the insulation and the short circuit prior to the automatic reclosure.
In the event of a fault (earth leakage), ReStart will not reset the circuit breaker but will continue to monitor the circuit every 2 minutes reclosing the circuit breaker when safe to do so.
Compatible with:
-GWD0951 auxiliary contact
-GWD0953 WiFi Interface Module
-GW90992 ModBus RS485 interface module (only if already coupled with GWD0951 auxiliary contact).
NOTE: the ARD must be supplied at 230 Vac phase-neutral.

CHARACTERISTICS: after RCBO has tripped, ReStart checks the insulation and the short circuit prior to the automatic reclosure. In the event of a fault (earth leakage or short circuit), ReStart will not reset the circuit breaker.
NOTE: the ARD must be supplied at 230 Vac phase-neutral.

CHARACTERISTICS: after RCBO has tripped, ReStart checks the insulation and the short circuit prior to the automatic reclosure. In the event of a fault (earth leakage), ReStart will not reset the circuit breaker but will continue to monitor the circuit every 2 minutes reclosing the circuit breaker when safe to do so.
Compatible with:
-GWD0951 auxiliary contact
-GWD0953 WiFi Interface Module
-GW90992 ModBus RS485 interface module (only if already coupled with GWD0951 auxiliary contact).
NOTE: the ARD must be supplied at 230 Vac phase-neutral.

CHARACTERISTICS: after RCBO has tripped, ReStart checks the insulation and the short circuit prior to the automatic reclosure. In the event of a fault (earth leakage), ReStart will not reset the circuit breaker but will continue to monitor the circuit every 2 minutes reclosing the circuit breaker when safe to do so. In the meantime the integrated configurable auxiliary contact will change state to indicate that the automatic reset did not take place.
Compatible with:
- GW90945 WiFi interface module
- GW90992 ModBus RS485 interface module
NOTE: the ARD must be supplied at 230 Vac phase-neutral.

ÖZELLİKLER: Rm TOP ReStart şunları sağlayacaktır:
- tekrar kapama modunu ayarlamak (sistem kontrolüyle tekrar kapama, denemelerle tekrar kapama, uzaktan tekrar kapama ve hariç tutulan tekrar kapama)
- yalıtım eşiğini ilgili devre kesiciye göre ayarlamak
- tekrar kapama süresi gecikmesini düzenlemek.
Cihazda 2 entegre yardımcı konum kontağı ve/veya atma rölesi bulunur.
NOT: ARD’ye 230 V ac nötr faz beslenmelidir.

ÖZELLİKLER: cihazda 1 entegre yardımcı konum kontağı veya atma rölesi bulunur.
NOT: tekrar kapama cihazına 230 V ac nötr faz beslenmelidir.

ÖZELLİKLER: Devre kesici attığında GW96014 sayesinde açtırma bobini tekrar kapanmadan önce bile ReStart RM TOP veya motorla çalışan ReStart CM sayesinde uzaktan tekrar kapatılabilir. ReStart RM TOP ve ReStart CM, hem devre kesici kolunun hem de açtırma bobini kolunun eş zamanlı olarak uzaktan tekrar kapanmasını etkinleştirir.
UYGULAMALAR: ReStart RM TOP veya motorla çalışan ReStart CM ile kaplinlenmiş devre kesicinin uzaktan açılmasını sağlamak için kullanılır. ReStart RM TOP ile bağlantılı bir bobini kullanırken sistem kontrolüne dikkat edin ve ReStart RM TOP’ta setini tekrar kapatın.
NOT: ReStart RM TOP kullanılırken ReStart RM TOP cihazı ve devre kesici arasına bir açtırma bobini yerleştirilmelidir.
ReStart CM kullanılırken ReStart CM cihazının soluna bir açtırma bobini yerleştirilmelidir. Bobinin sol tarafına ayrıca bir yardımcı konum kontağı veya hata göstergesi anahtarı da eklenebilir GW96014.

CHARACTERISTICS: the auxiliary contact, coupled on the right side of ReStart device, will change state to indicate that the automatic reset did not take place because there is a fault in the electrical system.
The auxiliary contact can be set in three operating modes:
- NO (default condition)
- NC
- NO as signal of handle position
NOTE: the auxiliary contacts is free potential type.

CHARACTERISTICS: the Wi-Fi modules (to be coupled on the right side of the ReStart PRO device) if connected to a router, allow the following information to be remoted on devices connected to the internet network:
- status of the' switch (ON/off)
- lack of power supply in the' system due to the presence of a fault
- restoration of the power' supply following the successful automatic reset
- if combined with ReStart Rd/Rm PRO 2P and ReStart Autotest PRO 2P, the consumption related to electricity produced and consumed, active and reactive power, current and voltage of the system
- if combined with Restart Autotest PRO 2P and 4P, the details of the' last Autotest operation (outcome, date and time)

CHARACTERISTICS: the BUS module, by means software available on www.GEWISS.com website, allows to:
- monitor the status of circuit breaker coupled with ReStart
- control Autotest fuuction remotely
- manage automatic reclosing function remotely.
APPLICATION: it allows the installation of ReStart device in monitoring systems with BUS RS485 communication protocol.