CHORUSMART - Domestic range
Satin white modular devices
The CHORUSMART modular devices make it possible to create infinite combination between devices and plates, thanks to a complete range that is able to satisfy all design, functional and installation requirements.
Colours and finishes: satin white, distinctive and elegant.
Unlimited functions in reduced spaces: the ChoruSmart range consists of rocker button keys with ½, 1, 2 and 3 modules, to optimise space as needed, and axial keys in EVO or SMART version, to satisfy even the most modern needs.
Front coupling: the front coupling makes the component assembly and release operations simple and quick, enabling these to be completed without removing the support, unique for all the plates and fruits.
CHARACTERISTICS: the illuminable articles use LED signalling units, not included. NOTES: GW15006 equipped with 2 keys. Key extractable in both positions. Spare keys: GW20901.
APPLICATIONS: suitable for particular heavy-duty loads (e.g. LED or fluorescent lamp batteries) or high-consumption devices (e.g. ovens, air-conditioners, boilers, etc.).
CHARACTERISTICS: the illuminable articles use LED signalling units, not included. NOTES: GW15054 equipped with 2 keys. Key extractable in both positions. Spare keys: GW20901.
CHARACTERISTICS: three standing positions. Both contacts are open in the central position (OFF). APPLICATIONS: command of circuits requiring an interlock (e.g. operating motorised devices with direction reversal). 2-user selective control.
CHARACTERISTICS: three standing positions. Both contacts are open in the central position (OFF). With 6 terminal blocks. APPLICATIONS: command of circuits requiring an interlock (e.g. operating motorised devices with direction reversal). 2-user selective control.
CHARACTERISTICS: the illuminable articles use LED signalling units, not included. GW15136 Cord in insulating material, 140cm long, with red knob. GW15140 Button with mechanical interlock. Both contacts are open in the central position (OFF); advisable for activating motorised devices with direction reversal (e.g. roller-shutters, curtains, etc.). GW15141 independent push-buttons that can also be activated simultaneously.
CHARACTERISTICS: devices for the control of 1 On/Off lighting device through a live output contact. Suitable for the control of incandescent and halogen (240Vac): 1000W, LED lamps (240Vac): 100W, fluorescent lamps (240Vac): 120W, halogen lamps powered by electronic transformers (240Vac): 250VA. Local push button with axial activation for control of the lamps connected to the device. Equipped with 1 input to replicate the local control of the load via auxiliary module GW10677, GW10678 or NO-type and 1-input buttons for the centralisation OFF function. APPLICATIONS: Bistable, monostable and timed load command. Centralisation function (OFF) by means of a dedicated input, the possibility of being able to switch the load on by means of auxiliary axial modules or NO-type buttons. The devices are equipped with a configurable blue LED that can be set to OFF, easy location mode or for signalling the connected load status. NOTES: the devices must be completed with a front button key: GW10671 must be completed with the GW15551S or GW15555S button keys. The GW10672 must be completed with the GW15552S or GW15556S button keys.
CHARACTERISTICS: trailing edge load drive mode (max. 5 lamps). Two local axial operated buttons for dimming the connected load.
Equipped with 2 inputs for replicating local control of the load via the auxiliary module GW10679, GW10680 or NO-type buttons or for creating the centralisation function. APPLICATIONS: control of the dimmable load connected to the devices. The dedicated inputs can be used to add a load switching-on function through auxiliary axial modules or NO-type buttons, or inputs can be set, via programming, for the centralised OFF function. The devices are equipped with blue LEDs that can be set to OFF, location mode or for signalling the connected load. NOTES: To avoid overheating, multiple dimmers cannot be installed side-by-side inside in the same enclosure. Insert a blanking module between two electronic devices. If two dimmers are installed in the same box, the maximum loads controlled by each dimmer must be reduced by 50%. The devices must be completed with a front button key: GW10673 must be completed with the GW15553S or GW15557S button keys; GW10674 must be completed with the GW15554S or GW15558S button keys.
CHARACTERISTICS: Devices for the control of a motor to operate roller-shutters, curtains, venetian blinds, awnings, etc., through 2 live interlocked output contacts. Two axial-operated local buttons control the motor connected to the device. Equipped with 2 inputs for replicating local control of the motor via the auxiliary module GW10679, GW10680 or NO-type up/down buttons, or for creating the centralisation function. APPLICATIONS: control of the motor connected to the devices. The dedicated inputs can be used to operate roller-shutters/venetian blinds via the auxiliary axial modules or NO-type up/down buttons, or they can be set, through programming, for centralisation functions (Up/Down). The devices are equipped with blue LEDs which can be configured to facilitate location at night and to signal the movement of the roller-shutter/Venetian blind. NOTES: the devices must be completed with a front button key: GW10675 must be completed with the GW15553S or GW15557S button keys.GW10676 must be completed with the GW15554S or GW15558S button keys.
CHARACTERISTICS: auxiliary controls to be used in conjunction with the EVO switch modules.
The devices are equipped with blue LEDs for easy location or for displaying the status of the load. APPLICATIONS: when connected to the local inputs of the EVO axial controls, they allow replication of the local load control or the management of centralised controls. NOTES: the devices must be completed with a front button key: GW10677 must be completed with the GW15551S or GW15555S button keys. GW10678 must be completed with the GW15552S or GW15556S button keys.
CHARACTERISTICS: auxiliary controls to be used in conjunction with the EVO dimmer and roller-shutter modules.
The devices are equipped with blue LEDs for easy location or for displaying the status of the load. APPLICATIONS: when connected to the local inputs of the EVO axial controls, they allow replication of the local load control or the management of centralised controls. NOTES: the devices must be completed with a front button key: GW10679 must be completed with the GW15553S or GW15557S button keys. GW10680 must be completed with the GW15554S or GW15558S button keys.
APPLICATIONS: replacement diffusers for indicators GW15142, GW15143 and GW15144. NOTES: the ChoruSmart modular system allows the use of 22 x 22 mm interchangeable buttons in place of the standard buttons fitted on the control devices GW15141, GW15142, GW15143 and GW15144. Symbols/diffusers not suitable for the EVO axial keys.
CHARACTERISTICS: push-button suitable for connection of KNX BUS contacts interfaces, or the command of bistable relays, electronic one-way switches for heavy duty loads, or dimmers with a remote control input.
CHARACTERISTICS: push-button for controlling latching relays, electronic switches for heavy duty loads, or dimmers with a remote control input.
Equipped with amber localisation LED.
CHARACTERISTICS: push-button for BUS inputs, suitable for KNX BUS contact interface connections. Equipped with 2-colour (amber/green) LED with colour selector (can be set up to work as a night-time localisation lamp or to indicate the load status).
CHARACTERISTICS: device for the On/Off control of 1 lighting device through a live output contact. Suitable for control of incandescent and halogen lamps (240Vac): 1000W, LED lamps (240Vac): 100W, fluorescent lamps (240Vac): 120W, halogen lamps powered by electronic transformers (240Vac): 250VA. Equipped with 1 input for replicating local control of the load via the GW10924 auxiliary touch control modules, NO-type buttons and 1 input for the centralisation of the OFF function. The device is equipped with blue LEDs for easy location that can be set to two different light intensity levels. Excludable built-in buzzer, function identification by means of icons on the ICE touch plates. APPLICATIONS: bistable, monostable and timed load control. Centralisation function (OFF) through the dedicated input. NOTES: to be completed with ICE touch plates (codes: GW16955CB, GW16955CL, GW16955CN, GW16955CT).
CHARACTERISTICS: trailing edge load drive mode (max. 5 lamps). Two touch areas for dimming the connected load. Equipped with 2 inputs for replicating local control of the load via the auxiliary touch 2-command modules GW10925, NO-type buttons, or for creating the centralisation function OFF. The device is equipped with blue LEDs for easy location that can be set to two different light intensity levels. Excludable built-in buzzer, function identification by means of icons on the ICE touch plates. APPLICATIONS: control of the dimmable load connected to the devices. Centralised OFF function, via dedicated inputs. NOTE: to avoid overheating, multiple products cannot be installed side-by-side inside in the same enclosure; insert a blanking module between two electronic devices. When installing two dimmers in the same box, the maximum loads controlled by each dimmer must be reduced by 50%. To be completed using ICE touch plates (codes: GW16955CB, GW16955CL, GW16955CN, GW16955CT).
CHARACTERISTICS: Devices for the control of a motor to operate roller-shutters, curtains, venetian blinds, awnings, etc., by means of 2 interlocked live output contacts. Two touch areas for controlling the motor connected to the device. Equipped with 2 inputs for replicating local control of the motor via the touch auxiliary 2-command modules GW10925, NO-type up/down buttons, or for creating a centralisation function (up/down). The device is equipped with blue LEDs for easy location that can be set to two different light intensity levels. Excludable built-in buzzer, function identification by means of icons on the ICE touch plates. APPLICATIONS: control of the motor connected to the devices. Centralisation function (Up/Down) by means of a dedicated inputs. NOTES: to be completed with ICE touch plates (codes: GW16955CB, GW16955CL, GW16955CN, GW16955CT).
CHARACTERISTICS: suitable for controlling the GW10922 module. The device is equipped with blue LEDs for easy location that can be set to two different light intensity levels. Excludable built-in buzzer, function identification by means of icons on the ICE touch plates. NOTES: to be completed using ICE touch plates (codes: GW16955CB, GW16955CL, GW16955CN, GW16955CT).
CHARACTERISTICS: suitable for controlling the GW10921 and GW10923 modules. The device is equipped with blue LEDs for easy location that can be set to two different light intensity levels. Excludable, built-in buzzer and functions identifiable by the icons on the ICE touch plates. NOTES: to be completed with ICE touch plates (codes: GW16955CB, GW16955CL, GW16955CN, GW16955CT)..
CHARACTERISTICS: glossy finish. The plate is to be used in combination with the touch modules (switch module GW10922, roller shutter module GW10921, dimmer module GW10923, 1-control auxiliary module GW10924, 2-control auxiliary module GW10925). NOTES: the symbols displayed in the image are purely indicative and may be customised using the icons supplied with the touch plate. The code of the plate is unique and independent of the number of icons used (from 2 to 6).
NOTES: GW15196 with anti-traction cable fastener device, cables min 6mm ø, max 10mm ø. GW15194 with anti-traction cable fastener device, cables min 4mm ø, max 10mm ø. To be installed with the cable output downwards.
CHARACTERISTICS: adjustment of the intervention duration 15 sec - 10 min. Light sensitive threshold adjustment - min. 10 lux - max. inhibited.
Suitable for commanding halogen lamps/resistive loads: 700 W, incandescent lamps: 450 W, low voltage halogen lamps (12 V) controlled by toroidal or electronic transformers: 450 W, uncompensated fluorescent lamps: 2x58 W, motors and gear motors: 400 VA, LED loads: 60 W (max. 10 lamps).
Not suitable for compensated fluorescent lamps, for discharge lamps and for all loads not indicated that must be commanded using a support relay. APPLICATIONS: Energy-saving: command of the lighting of rooms and areas only when people pass through.
Comfort and safety: automatic command of circuits without needing to activate one-way switches. NOTES: do not install the product in watertight plates: the lid membrane does not allow the detector lens to work correctly. Detection beam angle 120°, depth of detection max 8 metres.
CHARACTERISTICS: presence sensor, sensing range: 360° circle (max. diameter 18 metres); installable with fixing springs on a surface-mounted or recessed box. Suitable for the control of incandescent/halogen lamps: 1000W, LED lamps : 200W (4 / 23 W - max. 8 lamps). NOTE: equipped with a surface-mount box capable of holding sensors from IP20 to IP44.
CHARACTERISTICS: GW15721, GW15723 suitable for commanding incandescent/halogen lamps: 1000 W, fluorescent tubes with electronic ballast: 400 W, fluorescent tubes with electromechanical ballast: 360 W, compact fluorescent lamps (CFL): 200 W, LED lamps (230V ac): 200 W, low voltage halogen or LED lamps with electronic ballast: 200 W, low voltage halogen or LED lamps with electromechanical ballast: 400 W. APPLICATIONS: GW15721,GW15723 command of lighting devices from more than one point, by means of remote NO push-buttons. GW15721 motor function/stop commands (extractors, air agitators, etc.). GW15724 as an auxiliary element for commanding special loads, for distance signalling, for electrical separation between the command and use circuits.
CHARACTERISTICS: the product can be fitted directly in 2-module plates; with plates of a greater modularity, you are advised to use 2 blanking modules for a 1/2 module (one on the right and one on the left). APPLICATIONS: activation of circuits and services in hotel rooms (e.g. lights, air-conditioner, fridge-bar), indication of room occupied (with badge inserted) NOTES: badges not included. The article uses LED signalling units, not included.
CHARACTERISTICS: with "Do not disturb" (DND) and "Make up the room" (MUR) pad printings. To be used for the customization of the Chorus command devices. GW15731 and GW15732 suitable for one-way switches, two-way switches, intermediate switches and push-buttons. GW15733 suitable for three-way switches and push-buttons with central OFF position.
CHARACTERISTICS: with safety shields. Pit of side and central earth contacts. Pre-arranged for housing LED signalling units, not included. APPLICATIONS: possibility to indicate presence of auxiliary network.
CHARACTERISTICS: with safety shields. APPLICATIONS: suitable for plugs compliant with the following standards: Europlug 2P 2.5A - 250V, British 2P+E 13A - 250V, Italian 2P 10A - 250V, Danish 2P 10A - 250V, Chinese 2P+E 10A - 250V, Argentinean/Australian 2P+E 10A - 250V, Indian 2P+E 6A - 250V, USA 2P+E 15A - 127V. Not suitable for 2P+E German and French sockets because they don’t offer earth continuity. NOTES: the multistandard energy sockets GW1x310 are in compliance with the safety requirements defined by the International Standard IEC 60884-1. These sockets may not be in compliance with the standard sheets used in the country where they are sold, hence their usage could be prohibited or however, restricted only for specific applications. The plugs allowed are listed in the technical datasheet. Please contact directly Gewiss technical service for further information.
CHARACTERISTICS: Interlocked switched socket-outlets with automatic miniature circuit breaker (C characteristic). Pits under tension only with plug inserted. APPLICATIONS: suitable for installation in the system terminations to protect the load.
Interlocked switched socket-outlets with residual miniature circuit breaker - 230V ac
CHARACTERISTICS: Interlocked switched socket-outlets with automatic miniature circuit breaker (C characteristic) and residual current circuit breaker (type A). Pits under tension only with plug inserted. APPLICATIONS: suitable for installation in the system terminations to protect the load.
Shaver socket-outlet
Euro-American standard shaver socket-outlet with insulation transformer
CHARACTERISTICS: the socket-outlet is equipped with a self-protection device against overloading. The output voltage should be selected correctly, consulting the rating of the user device before inserting the plug. The relevant indicator LED allows the chosen voltage to be clearly seen. NOTES: not suitable for installation in wall-mounting boxes or free-standing containers.
Data - Satin white version
TV-SAT sockets
Coaxial TV sockets (5-2400 MHz), class A shielding - male IEC connector Ø 9.5 mm
CHARACTERISTICS: GW15361 allows the passage of voltage/current of remote power supply and/or control signals towards the user port (max 24V - 500 mA). GW20277 in combination with feedthrough socket-outlets allows you to make terminal socket-outlets. APPLICATIONS: Socket-outlets suitable for return channel. NOTES: the TV 5dB GW15362 coaxial socket-outlet is defined with conditional use: it is a special feedthrough socket-outlet, and must be used as such, with the only difference that the user port (socket-outlet towards the user device) must always be closed with a 75-Ohm load. (TV, VCR, SAT receiver or 75-Ohm termination)
Coaxial TV-SAT sockets (5-2400 MHz), class A shielding - female F connector
CHARACTERISTICS: GW15371 allows the passage of voltage/current of remote power supply and/or control signals towards the user port (max 24V - 500 mA). GW20277 in combination with feedthrough socket-outlets allows you to make terminal socket-outlets. APPLICATIONS: Socket-outlets suitable for return channel. NOTES: the TV-SAT 5dB GW15372 coaxial socket-outlet is defined with conditional use: it is a special feedthrough socket-outlet, and must be used as such, with the only difference that the user port (socket-outlet towards the user device) must always be closed with a 75-Ohm load (TV, VCR, SAT receiver or 75-Ohm termination).
CHARACTERISTICS: TV-FM direct co-axial socket-outlet GW15381: male IEC-type TV connector ø 9.5mm, female IEC-type FM connector ø 9.5mm.
TV-FM-SAT direct co-axial socket-outlet GW15382: male IEC-type TV connector ø 9.5mm, female IEC-type FM connector ø 9.5mm, female F-type SAT connector.
TV-SAT direct co-axial socket-outlet GW15383: male IEC-type TV connector ø 9.5mm, female F-type SAT connector. NOTES: demixed socket-outlets with input for co-axial cable Ø 5mm or 7mm.
Coaxial TV sockets (5-2400 Mhz), class A shielding - male IEC connector Ø 9.5mm
CHARACTERISTICS: allows the passage of voltage/current of remote power supply and/or control signals towards the user port (max 24V - 500 mA). APPLICATIONS: socket-outlets suitable for return channel.
Coaxial TV-SAT sockets (5-2400 Mhz), class A shielding - female F connector
CHARACTERISTICS: allows the passage of voltage/current of remote power supply and/or control signals towards the user port (max 24V - 500 mA). APPLICATIONS: socket-outlets suitable for return channel.
APPLICATIONS: LANs up to 100MHz (e.g. Ethernet, Token Ring networks) for cat. 5e; LANs up to 250MHz (e.g. Videoconference systems, CCTV) for cat. 6. NOTES: circuit identification label included.
NOTES: with regard to the technological developments and dimensional variants introduced by connector manufacturers, you are advised to check in advance the full compatibility between the connector and the GEWISS adapter.
APPLICATIONS: LAN networks up to 100 MHz (e.g. Ethernet or Token Ring networks) for cat. 5e; LAN networks up to 250 MHz (e.g. video conference or video control systems) for cat. 6.
NOTES: due to technological developments and dimensional variants introduced by connector manufacturers, you are advised to check in advance the full compatibility between the data socket and the GEWISS empty enclosure.
CHARACTERISTICS: cable outlet inclined of 40° to the wall line. With ceramic fiber optic sleeve and dust caps. The front output is protected with safety cap and unmissable cord. Suitable to join two single-mode SC/APC fiber optic patch cables. NOTES: for adapters (Chorus, System and Dahlia) with Keystone Jack coupling.
CHARACTERISTICS: GW15453 double RCA stud connector, red and white, weld-in connection. GW15454 welding connection. GW15458 front access terminals for inserting 1.5 mm² rigid wires, insulator punching rear connection suitable for cables AWG24 or max 0.25mm².
CHARACTERISTICS: suitable for recharging a single electronic device (e.g. tablet) or two devices simultaneously (e.g. a tablet and smartphone). The division of the current delivered to the two outputs depends on the state of charge of the connected devices.
Protection - Satin white version
Miniature circuit breakers
MCB - Miniature circuit breakers - C characteristic - 230V ac
CHARACTERISTICS: green LED for status signalling. APPLICATIONS: protection of electronic devices (TV, HI-FI, computer, etc.) from overvoltage (resulting from atmospheric conditions or manoeuvres) that could be channelled from the power supply lines.
CHARACTERISTICS: LED signalling units, not included. APPLICATIONS: the meaning of the diffusers refers to the recommendations of standard EN60073 with regard to the use of the colours in indicator lights.
CHARACTERISTICS: LED signalling units, not included. APPLICATIONS: the meaning of the diffusers refers to the recommendations of standard EN60073 with regard to the use of the colours in indicator lights.
CHARACTERISTICS: LED signalling units, not included. APPLICATIONS: the meaning of the diffusers refers to the recommendations of standard EN60073 with regard to the use of the colours in indicator lights.
CHARACTERISTICS: highly efficient white LED, powered at 12V ac/dc - 230V ac with double power supply inlet. APPLICATIONS: suitable for special applications such as the signalling of calls from hospital wards. NOTES: complete with lamp.
CHARACTERISTICS: for continuous use. Three tones (alarm, ring and two-tone) with adjustable sound intensity. APPLICATIONS: it is possible to combine the outdoor call, indoor call and alarm functions with one single device.
Energy, temperature and comfort management - Satin white version
FEATURES: flush-mounted thermostat for the control of heating/cooling systems with manual temperature management and possibility of shutdown. Control algorithms for two-way systems: two points (ON/OFF), proportional-integral (PWM). The thermostat can control a solenoid valve for heating or cooling through a local contact or via Zigbee, in which case the solenoid valve must be controlled by a Zigbee actuator. GWA1521, GWA1522, GWA1523, GW1x826, GWA1201, and GWA1202 Zigbee connected actuators can be used.
The thermostat is equipped with integrated temperature and humidity sensors. The thermostat has an input for a NTC sensor (GW10800 and GW1x900 sensors can be used) for external temperature measurement (e.g., for compensation of temperatures measured locally by the thermostat or for protection in case of underfloor heating/cooling). APPLICATIONS: climate control (heating or cooling) of a housing unit or area; option to manage a daily or weekly heating/cooling profile via the APP. The device measures humidity, if a threshold (defined during configuration) is exceeded, Zigbee can activate a dehumidification system and display/notify the measurement on the APP.
Use in traditional unconnected systems: the connected thermostat can also be used in traditional unconnected installations. In this case, configuration is not carried out via the APP and the NTC sensor input can only be used to compensate for the temperature measurement detected locally by the thermostat.
CHARACTERISTICS: choice of working mode by means of selector located on the front: summer (air-conditioner), OFF, winter (boiler). Two-colour front LED to signal the output status (open/closed contact). The lighting up of the LED also indicates mains presence.
CHARACTERISTICS: wall-mounting thermostat to control heating/cooling and humidification/dehumidification systems and manage the temperature in manual mode or on 3 levels (comfort, pre-comfort, economy). Control algorithms for two-way systems: two points (ON/OFF), proportional integral (PWM). Includes 1 input for external NTC temperature sensor (e.g.: protection for flood mounting heating). Equipped with a user interface with touch commands (capacitive) on technopolymer plate and backlit display. The thermostat has built-in proximity, temperature and humidity sensors and a Wi-Fi interface for setting parameters and programming temperature profiles (timed thermostat function) locally or by remote via specific apps (smartphone and tablet). NOTES: wall-mounting with wall-plugs or on 3-modules rectangular boxes (centre distance 83.5 mm) Plate material; technopolymer.
CHARACTERISTICS: suitable for dimming incandescent and halogen lamps 230 V ac (10-160 W); low-voltage halogen lamps (12 V ac) with electronic transformers (10-160 W) and LED lamps 230 V ac (4-160W), rotary control with 2-way switch. Equipped with amber-colour-red signalling LED. Can be operated without neutral connection. NOTES: the installation of more than one dimmer side-by-side in a single container is not permitted. To avoid overheating, insert a blanking module between two dimmers. If installing two dimmers in the same box, the maximum loads that can be controlled by each dimmer must be reduced by 50%.
Rotating electronic regulators for resistive/inductive loads
CHARACTERISTICS: with signalling led orange. GW15567 rotary command with two-way switch.
GW15564 compliance with the EMC directive is only guaranteed by connecting the regulator to an LC filter with the following characteristics: L=1mH - 5A, C=0.15uF - 275V X2, according to the documentation provided with the product. Item designated solely for export to a limited number of countries outside of the European Union or countries applying to become part of the European Free Trade Area. Contact GEWISS Customer Service to check the product meets the regulations of the country concerned before importing it. NOTES: to avoid overheating, the side by side installation of several products in a single container is not permitted; insert a blanking module between two electronic devices. If installing two regulators in the same box, the maximum loads that can be commanded by each regulator must be reduced by 50%.
CHARACTERISTICS: for the regulation and switching of incandescent and halogen lamps 230V AC (40-300W), low voltage halogen and LED lamps with electronic and winding transformers (40-300W), LED lamps 230V AC with dimmer function (5-150W). Manual selection of the type of load (Leading Edge or Trailing Edge piloting), soft-start function for lamp protection. Possibility to command and regulate from remote control push-buttons with NO contacts. Equipped with orange signalling LED. NOTES: to avoid overheating, the side-by-side installation of several products in a single container is not permitted; insert a blanking module between two electronic devices. If two regulators are installed in the same box, the maximum loads that can be commanded by each regulator must be reduced by 50%.
Electronic regulator with button for resistive/inductive loads
CHARACTERISTICS: possibility to command and regulate from remote control push-buttons with NO contact. With signalling led orange. NOTES: to avoid overheating, the side by side installation of several products in a single container is not permitted; insert a blanking module between two electronic devices. If installing two regulators in the same box, the maximum loads that can be commanded by each regulator must be reduced by 50%.
CHARACTERISTICS: the alarm detects the presence of water and includes a temperature sensor. Powered by CR123-type battery (replaceable). NOTES: floor-mounting or alternatively wall-mounting possibility through the GWA1541 accessory. To be used in combination with the Zigbee actuator GWA1521 when controlling an electrovalve or a load.
CHARACTERISTICS: 1-channel actuator for activating loads via the potential-free output contact (NO). Suitable for commanding incandescent lamps (230 V ac): 2300W, loads controlled from toroidal transfomers: 450W, loads controlled from electronic transformers: 600W, energy saving lamps (compact fluorescent): 150W, LED lamps (230 V ac): 150W, motors: 500W. APPLICATIONS: when used with the water sensor, provide the installation of a NO push-button to open the electrovalve manually. NOTES: installation in flush-mounting boxes, junction boxes, etc..
CHARACTERISTICS: 1-modules blanking module with pad printing. Allows the housing and fast identification of the flush-mounting RF Zigbee actuator. NOTES: snap-in assembly.
Błąd podczas wysyłania żądania.
Prosimy, spróbuj później!
Dziękuję!
Twoja prośba została wysłana pomylśnie
✕
Twoja prywatność jest dla nas ważna.
Firma Gewiss wykorzystuje własne techniczne pliki cookie oraz pliki cookie podmiotów zewnętrznych w celu zapewnienia prawidłowego funkcjonowania witryny oraz do celów statystycznych, a także, za zgodą użytkownika, profilowane pliki cookie w celu zapewnienia spersonalizowanych wrażeń i reklam ukierunkowanych na podstawie analizy nawigacji użytkownika. Klikając „Akceptuj wszystkie”, wyrażasz zgodę na wszystkie pliki cookie profilujące Jeśli zamkniesz ten baner, klikając „X”, możesz kontynuować przeglądanie bez instalowania profilujących plików cookie. Zawsze możesz zmienić swoje preferencje, korzystając z funkcji oferowanych przez Gewiss, przechodząc do strony „Polityka plików cookie” za pośrednictwem łącza w stopce u dołu każdej strony na Witrynie. Więcej informacji można znaleźć w naszej Polityce prywatności i Polityce plików cookie.
Firma Gewiss i niektóre podmioty zewnętrzne wykorzystują pliki cookie znajdujące się na stronie „gewiss.com”.
Firma Gewiss wykorzystuje własne techniczne pliki cookie oraz pliki cookie podmiotów zewnętrznych w celu zapewnienia prawidłowego funkcjonowania witryny oraz do celów statystycznych, a także, za zgodą użytkownika, profilowane pliki cookie w celu zapewnienia spersonalizowanych wrażeń i reklam ukierunkowanych na podstawie analizy nawigacji użytkownika. Klikając „Zezwól na wszystkie”, wyrażasz zgodę na wszystkie pliki cookie profilujące
Zarządzaj preferencjami:
+
Techniczne pliki cookie
technical
Techniczne pliki cookie są niezbędne do umożliwienia korzystania ze strony internetowej, na przykład poprzez umożliwienie dostępu do obszarów chronionych. Zgoda użytkownika nie jest wymagana do ich funkcjonowania. Bez tych plików cookie prawidłowe poruszanie się po stronie internetowej może być trudne lub niemożliwe.
+
Funkcjonalne pliki cookie
Funkcjonalne pliki cookie umożliwiają stronie internetowej przechowywanie informacji, które wpływają na jej zachowanie lub wygląd na podstawie żądań użytkowników. Do ich funkcjonowania wymagana jest zgoda użytkownika.
+
Statystyczne pliki cookie
Statystyczne pliki cookie pozwalają nam zrozumieć, w jaki sposób użytkownicy korzystają ze strony internetowej, wspierając Administratora w zrozumieniu głównych form interakcji. Do ich funkcjonowania wymagana jest zgoda użytkownika.
+
Marketingowe pliki cookie
Marketingowe pliki cookie służą do śledzenia odwiedzających, na przykład do prezentowania treści interesujących indywidualnego użytkownika. Do ich funkcjonowania wymagana jest zgoda użytkownika.
Wymagane pole
Check that the e-mail is not already used or that all the fields have been enhanced
Sprawdź swój email
hasło musi zawierać od 6 do 12 znaków, cyfrę oraz literę
Rejestracja została pomyślnie zakończona
Uwaga: Niepoprawna nazwa użytkownika i/lub hasło
Wprowadź poprawny adres e-mail
niezgodna wartość
Modyfikacja danych została pomyślnie zakończona
To fill the form you must be logged. Please go to
login page
e-mail/ wiadomość wysłana pomylśnie
Wpisany
Dziękuję!
Twoja prośba została wysłana pomylśnie
Błąd uwierzytelniania
Błąd podczas wysyłania żądania
Prosimy, spróbuj później!
Użytkownik nie znaleziony
Błąd integracji
Skontaktuj się z administratorem
Jesteś już zarejestrowany na wydarzeniu
Sprawdź kartę
Zmiana hasła została pomyślnie zakończona
hasło musi zawierać od 6 do 12 znaków, cyfrę oraz literę
Wpisz wiadomość w odpowiednim polu
Błąd podczas wysyłania żądania. Prosimy, spróbuj później!
Zapisz na liście
Wstaw nazwę katalogu
Przedawniony
Aby pobrać plik, musisz wybrać odpowiedni profil podczas rejestracji, przejdź do modyfikacji i zmień profil
Aby pobrać plik, musisz być zalogowany jako instalator lub hurtownik. Zmień profil.
For the download of the file you have to be a professionist installer or wholesaler, a designer or lighting designer. Upgrade your profile on my profile page!
IDŹ
Podany kod jest niedostępny, spróbuj się zalogować
The date must be of the indicated format
Lista
Stworzone przez
Select
Account not yet confirmed, please confirm the link we sent you by mail