Teknik yazılımlar

START is a software that permits the Gewiss Software management and choice during the installation, updating and uninstallation. START can detect the installed softwares and permits to update them. The not installed software can be selected by a simple and intuitive “Operations list” that helps the user to choose the most fit software. START contains descriptions, video lessons and presentation showing the working and the characteristics of each software.

SINC is a simple software for the updating of all the Gewiss softwares. To use SINC all you need is a simple Internet connection. SINC can recognize if the installed software versions have to be updated; the updating of all the softwares, is carried out by a simple click.

The software PBT-Q allows in a simple and quick way to design and estimate the electrical Low voltage installation system. Main functions offered by the software (this tool): - drawing of the electrical scheme, - calculation of the parameters of the electric system, - automatic or manual configuration of the structure, - thermic verification, - auxiliary circuits draw, - measure circuits draw, - estimation of the system.

CADpro is an easy to use software for designing electrical systems for residential and service industry applications. The programme can be used independently (AutoCAD not required). It has a two-dimensional CAD engine with all the main AutoCAD commands (layer, grid, filters, block management etc.).

PRICE is an easy to use software programme for preparing cost estimates of electrical systems. The programme can be used as follows: - independently for making cost estimates from scratch; - by importing data from the Software GEWISS for making complete cost estimates.

ENERGYpro permits to configure the TTA, ACS or DBO boards by simply choosing among the panels foreseen by Pre-fitted system and automatically draws up the technical documentation foreseen by the Standards.

BUS allows to design and to budgeting BUS systems with this software is also possible to represent the planimetry and the device link scheme. Il program is composed by various sections: Dispositive scheme: In this window are showed all the device with their link that form the various function\scenery. In this section the user can insert new device and modify the links according to the rules of domotic systems.

CITY VISION allows to design and budgeting video intercom systems. With this software is also possible to create the planimetry and the system scheme. The program is composed by 3 sections: System tree: This section contains the system structure with: buildings, floors and flats and consequently the number and type of outdoor stations and video entryphones. To facilitate the creation of the video intercom system is available a simple WIZARD. Properties: This section shows the properties of the selected device in the system tree. Planimetry: The program creates automatically the system planimetry with the various device inserted in the system tree. The project documentation can be printed or exported in Word, Excel or Pdf format. The planimetry can be also exported in DXF format openable with AutoCad or CADpro.

PROLITE the new version of the now well known program by GEWISS for lighting design for interiors, exteriors, streets and tunnel. Prolite 6.1can be an excellent help to designers for making estimates and for creating all the documentation to provide to the customer in support of the project choices.

RESTART is an online software that can be used by any device connected to Internet (smartphones, tablets or PCs) with witch is possible to find the automatic reclosing devices ReStart. The program consists of: a search area where is possible to set various filters (voltage, current, etc., etc.) and a result area where the program will show the resulting GEWISS products and for each product is possible to export: the image, the technical data sheet and all the technical data.

JOINON is an online software that can be used by any device connected to Internet (smartphones, tablets or PCs) with witch is possible to find the charging device for electric vehicles . The program consists of: a search area where is possible to set various filters (voltage, current, power, etc., etc.) and a result area where the program will show the resulting GEWISS products and for each product is possible to export: the image, the technical data sheet and all the technical data.

BIM is an online software that can be used by any device connected to the Internet (smartphones, tablets or PCs) with which you can download the BIM models of GEWISS products. The program allows you to navigate within the GEWISS catalogue among the various: series, categories and subcategories, obtaining the 3D image of the product and its BIM model (* .RFA format) for Autodesk REVIT program.

CENTRAL is an online software that can be used by any device connected to Internet (smartphones, tablets or PCs) with witch is possible to set up the thermal test of modular enclosures according with the Standard IEC 60670-24 - Ann. AA. The program consists of: a search area where is possible to search the modular devices (switch disconnectors, MCBs, RCBO, etc. etc.) and a calculation area where is possible to choose the enclosure in order to obtain the thermal test. At the end of the thermal test is possible to export: the material list, the front view and the thermal test documentation.

DOMO CENTER is an online software that can be used by any device connected to Internet (smartphones, tablets or PCs) with witch is possible to set up the flush-mounting system columns for distribution, H&B automation and data DOMO CENTER. The program consists of: a search area where is possible to set various filters (height, color, etc., etc.) and a set up area where the user can drag and drop the various panel in the selected board. At the end of the board configuration is possible to export: the material list, the front view and the 1:1 technical drawing.

ECOLED is an online software that can be used by any device connected to Internet (smartphones, tablets or PCs) with which is possible to calculate the payback coming from the replacement of traditional lighting luminaires with LED luminaries .

CONDUIT is an online software that can be used by any device connected to Internet (smartphones, tablets or PCs) with witch is possible to obtain the conduit according to the cables inserted. The program consists of: a cable area where is possible to select the cable type and a calculation area where is the program shows the right conduits for the cable inserted. At the end of the calculation, you can export the documentation including the material list and the technical data sheet and all the technical data.

WithNEMO DATA is possible to covert the data file exported by the NEMO DIN PLUS GW81379 in TXT or XLS format. The software creates a table with the emergency installation state as request by the standards.

PlugIn for the professional design of light with Gewiss products for use with the software Dialux®.

AUTOCAD® Plugin contains the technical designs (1:1 scale) for the GEWISS products included in the catalogue, in this way is possible to create compositions or to insert the constructive details in a CAD project.

Plugin with Gewiss products for the lighting software Relux®

Plugin with Gewiss products for the design software REVIT®. REVIT® Plugin for BIM design with Gewiss products in order to use it in the software Autodesk Revit®, with the plugin will be possible to insert single Gewiss products or composition directly in the project.

HAPPY HOME Configurator allows to configure and customize the graphic interface and the connection parameters of the “HAPPY HOME” APP for the KNX domotic system. The configuration consists in importing the ETS or the Easy Controller project (for KNX or KNX Easy systems) into the HAPPY HOME Configurator software, creating the desired customizations and exporting into a format suitable for the mobile device (smartphone or tablet).

Easy controller is the software for the configuration and commission of GEWISS KNX Easy systems up to a maximum of 256 devices. It requires a PC and an interface KNX Bus access (eg: KNX/USB interface GW90706S or GW90706B) for the connection to all the Easy devices located on the Bus.

Download the General ETS Database for all the KNX devices.

GRAPHICknx allows you to create and customize the graphical interface for Master ICE panels and the KNX home automation supervision “Base” and “Plus” software, using icons, pictures and planimetries. The configuration is carried out by importing the ETS file project and creating the association between the graphical icons and the group addresses of the KNX system.

UPS Software facilitates the choice of the Uninterruptible Power Supply UPS used for emergency lamps. The user must compile some fields so the software can automaticly calculate the electric power for the correct working of the emergency lighting. During the computation the software considers: -Lamps starting current -Lamps nominal current

TEST allows to keep under control the automatic reclosing devices of ReStart / AUTOTEST family connected into a BUS communication network. It also allows to supervise an emergency lighting system through central NemoDin Plus device.

Software for the firmware update of DMX unit GW85691 and for the preset and programs DMX compilation. With DMX software is possible to reduce the data entry time for the various scenography setting.

DOMOTICS – ZigBee network management PC software
ZigBee Configurator allows to create and manage a ZigBee network and all the ZigBee devices connected.

Thanks to Smart Gateway APP, the management of the home automation system is simple and intuitive, with the possibility to control (even remotely) lighting, blinds and venetian blinds, scenarios, temperature and humidity of each room, burglar alarm system, video cameras.

The new Gewiss APP for local and remote management of the KNX system from mobile devices (Tablets, Smartphones). The APP allows you to control and display the lighting, roller shutters, Venetian blinds, configure and execute scenarios, adjust the temperature and humidity of each room, monitor energy consumption and manage the burglar alarm.

The APP allows to control and program THERMO ICE WiFi from Android mobile devices. With THERMO ICE APP you can manage, in a easy way, your heating/cooling system from your mobile device: you need a Gewiss THERMO ICE WiFi thermostat on your plant.

All GEWISS knowing at your fingertips. All GEWISS knowing at your fingertips. An easy interface to keep with you all the information on the GEWISS offer: catalogues, brochures, and technical manuals. But also corporate presentations and corporate housings. An up-to-date library with you wherever you go.