QDX 630 H range Monobloc and modular distribution boards up to 630A - IP55
The QDX 630 H range of boards is available in two distinct solutions, wall and floor mounting. Monobloc structure in welded sheet metal for wall mounting version and modular structure with fully removable front for floor mounting version. It is ideal in all those applications where maximum protection from external agents is needed.
EQUIPMENT: no. 4 wall mounting brackets. NOTES: The GWD3103, GWD3104, GWD3109 and GWD3110 cases are equipped with an associated side compartment (200 mm wide) for the cables, terminal block or bar system. To secure the cables in the side compartment, use the pair of GWD3467 crosspieces, to be ordered separately.
The doors of the side compartment for codes GWD3103, GWD3104, GWD3109 and GWD3110 are supplied pre-mounted on the case.
ACCESSORIES SUPPLIED: rod-mechanism lock door, equipped with rotary handle with security lock and Yale type key. CHARACTERISTICS: possibility to assemble the door with reversible opening (right/left).
Smoked tempered glass.
ACCESSORIES SUPPLIED: rod-mechanism lock door, equipped with rotary handle with security lock and Yale type key. CHARACTERISTICS: possibility to assemble the door with reversible opening (right/left).
NOTES: In the case of installation of aerated side panels, the enclosure protection rating is IP30.
Each side panel has 2 surfaces with slits (one lower and one upper) each 58 cm² in size.
CHARACTERISTICS: Structures are equipped with an associated side compartment (300 mm wide) for the cables, terminal block or bar system. COMPONENTS: 2 wall mounting brackets and 4 crosspieces for attaching cables.
Inspectable base supplied loose inside the package. NOTES: Base height = 100 mm.
NOTES: uprights suitable only for floor-mounting distribution boards with side compartment with functional depth P=400 mm.
To complete the structure you need the rear uprights and functional frames to be ordered separately.
NOTES: uprights and functional frames suitable only for floor-mounting distribution boards with side compartment with functional depth P=400 mm.
To complete the structure you need the front uprights and functional frames to be ordered separately.
ACCESSORIES SUPPLIED: rod-mechanism lock door, equipped with rotary handle with security lock and Yale type key. CHARACTERISTICS: possibility to assemble the door with reversible opening (right/left).
Smoked tempered glass.
ACCESSORIES SUPPLIED: rod-mechanism lock door, equipped with rotary handle with security lock and Yale type key. CHARACTERISTICS: possibility to assemble the door with reversible opening (right/left).
COMPONENTS: 2 wall mounting brackets.
Inspectable base supplied loose inside the package. NOTES: Base height = 100 mm.
Associating the external compartment with the structure can be carried out using the side attachment kit, to be ordered separately.
To secure the cables in the outer compartment, use the pair of GWD3468 crosspieces, to be ordered separately.
COMPONENTS: Aluminium EN 50022 double rail (DIN 35). CHARACTERISTICS: RAL 7035 grey painted sheet metal panels equipped with rotation hinges and 1/4 turn lock. NOTES: Mounting the DIN rail requires brackets (bracket type depends on the depth of the panel), to be ordered separately.
ACCESSORIES SUPPLIED: no. 1 horizontal wiring trunking support for GWD3311 and no. 2 for horizontal wiring trunking supports for GWD3313. The supports must be mounted on the back of the of the double EN 50022 (DIN 35) rail. NOTES: GWD3313 and GWD3314 are not suitable for wall-mounting distribution boards.
MSX moulded case circuit breakers installation on plate
Installation kit for MCCB's up to 630 A in horizontal position fixed version
ACCESSORIES SUPPLIED: galvanised sheet metal support plate, raiser brackets and pre-drilled panel. CHARACTERISTICS:RAL 7035 grey painted sheet metal panels equipped with rotation hinges and 1/4 turn lock. NOTE: The kits are suitable for 3P and 4P MCCB's.
Installation kit for MCCB's up to 630 A in vertical position fixed version
ACCESSORIES SUPPLIED: galvanised sheet metal support plate, raiser brackets and pre-drilled panel. CHARACTERISTICS: RAL 7035 grey painted sheet metal panels equipped with rotation hinges and 1/4 turn lock. NOTE: The kits are suitable for 3P and 4P MCCB's.
Installation kit for MCCB's up to 630 A fixed version with direct rotary handle
ACCESSORIES SUPPLIED: galvanised sheet metal support plate, raiser brackets and pre-drilled panel. CHARACTERISTICS: RAL 7035 grey painted sheet metal panels equipped with rotation hinges and 1/4 turn lock. NOTE: The kits are suitable for 3P and 4P MCCB's.
Installation kit for MCCB's up to 630 A fixed version with motor operating device
ACCESSORIES SUPPLIED: galvanized sheet metal support plate, overhead brackets (if required) and pre-cut panel. FEATURES: RAL 7035 grey painted sheet metal panels equipped with rotating hinges and 1/4 turn locks. NOTES: the kits are suitable for 3P and 4P switches.
MSS switch disconnectors installation on plate
Installation kit for switch disconnectors up to 630 A fixed version
ACCESSORIES SUPPLIED: galvanised sheet metal support plate, raiser brackets and pre-drilled panel. CHARACTERISTICS:RAL 7035 grey painted sheet metal panels equipped with rotation hinges and 1/4 turn lock. NOTE: The kits are suitable for 3P and 4P MCCB's.
CHARACTERISTICS: The GWD3346, GWD3347, GWD3348 and GWD3349 bottom plates replace the functional frames and can be adjusted in depth. NOTES: The GWD3346, GWD3347, GWD3348 and GWD3349 bottom plates are not suitable for boards with a functional depth of 250 mm.
CHARACTERISTICS: plastic dividers to realize Form 2 configuration in the case of busbars mounted in the side and external compartment. NOTES: segregation not suitable for wall-mounting boards.
CHARACTERISTICS: metal dividers used to divide the distribution board into sections. NOTES: GWD3377 and GWD3378 are not suitable for wall-mounting distribution boards.
CHARACTERISTICS: plastic adapter for compensation of the different installation depths on DIN rail EN 50022 of the modular devices (90 range) and moulded case circuit breakers (MSX range).
CHARACTERISTICS: allows the installation of vertical wiring trunkings with heights H=40 mm, H=60 mm or H=80 mm. NOTES:not suitable for distribution boards with functional depth P= 200/ 250 mm.
Pair of supports for horizontal terminal block and earth bar
CARACTERÍSTICAS: o ventilador leva ar do exterior e coloca-o dentro do quadro, criando uma ligeira sobreposição que impede a entrada de partículas estranhas.. Capacidade máxima do ventilador 60 m³ / h. Potência absorvida igual a 20 W. APLICAÇÕES: ventilação forçada em condições críticas de temperatura. INCLUI: Modelo de perfuração.
Gewiss utiliza cookies propias y de terceros para diferentes propósitos: cookies técnicas para permitir que el sitio web funcione correctamente (y para las cuales no se requiere el consentimiento del usuario), cookies de funcionalidad para almacenar la configuración elegida por el usuario, cookies estadísticas para comprender cómo los usuarios navegan por el sitio web y cookies de marketing para rastrear a los usuarios y presentarles contenido de interés. Al hacer clic en la "X" podrá continuar navegando y rechazar todas las cookies que no sean técnicas; Además, siempre puede cambiar sus opciones a través del botón "Administrar privacidad" en la Política de Cookies. Por último, para más información, consulte también nuestra Nota de Privacidad.
Gewiss y algunos terceros hacen uso de cookies en "gewiss.com".
Gewiss utiliza cookies propias y de terceros (respectivamente, cookies generadas y gestionadas directamente por el titular del sitio web en el que navega el usuario y cookies generadas y gestionadas por terceros distintos del titular del sitio web) con diferentes finalidades. Al hacer clic en "Permitir todo" dará su consentimiento para todas las cookies pertenecientes a las categorías indicadas a continuación; por otro lado, al hacer clic en "Confirmo mis elecciones" usted consentirá la instalación de las categorías de cookies para las que da su consentimiento.
Gestionar preferencias:
+
Cookies Técnicas
technical
Las cookies técnicas son necesarias para que el sitio web sea utilizable, por ejemplo, permitiendo el acceso a áreas protegidas. No se requiere el consentimiento del usuario para su funcionamiento. Sin estas cookies, puede ser difícil o imposible navegar correctamente por el sitio web.
+
Cookies de Funcionalidad
Las cookies de funcionalidad permiten al sitio web almacenar información que afecta a su comportamiento o apariencia en función de las solicitudes del usuario. Se requiere el consentimiento del usuario para su funcionamiento.
+
Cookies Estadísticas
Las cookies estadísticas nos permiten comprender cómo los usuarios utilizan el sitio web, ayudando al Controlador de datos a comprender las principales formas de interacción. Se requiere el consentimiento del usuario para su funcionamiento.
+
Cookie de marketing
Las cookies de marketing se utilizan para rastrear a los visitantes, por ejemplo, para presentar contenido de interés para un usuario individual. Se requiere el consentimiento del usuario para su funcionamiento.
Campo obrigatório
Check that the e-mail is not already used or that all the fields have been enhanced
Verifique seu e-mail
A senha deve conter pelo menos 6 e no máximo 12 caracteres, um caractere numérico, uma letra maiúscula e uma minúscula
O cadastro é concluído com sucesso
Atenção: o nome de usuário e a senha não correspondem
Digite um endereço de e-mail válido
O valor não corresponde
A atualização dos dados foi concluída com sucesso
Para preencher o formulário, você deve estar logado. Por favor vá a
login page
E-mail enviado com sucesso
Inscrito
Obrigado!
A sua solicitação foi enviada corretamente
Erro de autenticação
Erro ao enviar o pedido
Por favor tente de novo mais tarde!
Usuário não encontrado
Erro de integração
Entre em contato com o administrador
Você já está cadastrado no evento
Ver a ficha
A mudança de senha foi concluída com sucesso
A senha deve conter pelo menos 6 e no máximo 12 caracteres, um caractere numérico, uma letra maiúscula e uma minúscula
Digite o e-mail no campo apropriado
Erro de envio da solicitação. Por favor tente de novo mais tarde!
Salvar na lista
Insira o nome do catálogo
Expirado
Para o download do arquivo você deve escolher um subtipo durante o registro, vá em modificar o perfil e escolha-o!
Para o download do arquivo você precisa ser um instalador profissional ou atacadista. Atualize seu perfil na minha página de perfil!
For the download of the file you have to be a professionist installer or wholesaler, a designer or lighting designer. Upgrade your profile on my profile page!
IR
O código de verificação está expirado, tente iniciar sessão
The date must be of the indicated format
Lista
Criado por
Select
Account not yet confirmed, please confirm the link we sent you by mail