QDX 630 H range Monobloc and modular distribution boards up to 630A - IP55
The QDX 630 H range of boards is available in two distinct solutions, wall and floor mounting. Monobloc structure in welded sheet metal for wall mounting version and modular structure with fully removable front for floor mounting version. It is ideal in all those applications where maximum protection from external agents is needed.
EQUIPMENT: no. 4 wall mounting brackets. NOTES: The GWD3103, GWD3104, GWD3109 and GWD3110 cases are equipped with an associated side compartment (200 mm wide) for the cables, terminal block or bar system. To secure the cables in the side compartment, use the pair of GWD3467 crosspieces, to be ordered separately.
The doors of the side compartment for codes GWD3103, GWD3104, GWD3109 and GWD3110 are supplied pre-mounted on the case.
ACCESSORIES SUPPLIED: rod-mechanism lock door, equipped with rotary handle with security lock and Yale type key. CHARACTERISTICS: possibility to assemble the door with reversible opening (right/left).
Smoked tempered glass.
ACCESSORIES SUPPLIED: rod-mechanism lock door, equipped with rotary handle with security lock and Yale type key. CHARACTERISTICS: possibility to assemble the door with reversible opening (right/left).
NOTES: In the case of installation of aerated side panels, the enclosure protection rating is IP30.
Each side panel has 2 surfaces with slits (one lower and one upper) each 58 cm² in size.
CHARACTERISTICS: Structures are equipped with an associated side compartment (300 mm wide) for the cables, terminal block or bar system. COMPONENTS: 2 wall mounting brackets and 4 crosspieces for attaching cables.
Inspectable base supplied loose inside the package. NOTES: Base height = 100 mm.
NOTES: uprights suitable only for floor-mounting distribution boards with side compartment with functional depth P=400 mm.
To complete the structure you need the rear uprights and functional frames to be ordered separately.
NOTES: uprights and functional frames suitable only for floor-mounting distribution boards with side compartment with functional depth P=400 mm.
To complete the structure you need the front uprights and functional frames to be ordered separately.
ACCESSORIES SUPPLIED: rod-mechanism lock door, equipped with rotary handle with security lock and Yale type key. CHARACTERISTICS: possibility to assemble the door with reversible opening (right/left).
Smoked tempered glass.
ACCESSORIES SUPPLIED: rod-mechanism lock door, equipped with rotary handle with security lock and Yale type key. CHARACTERISTICS: possibility to assemble the door with reversible opening (right/left).
COMPONENTS: 2 wall mounting brackets.
Inspectable base supplied loose inside the package. NOTES: Base height = 100 mm.
Associating the external compartment with the structure can be carried out using the side attachment kit, to be ordered separately.
To secure the cables in the outer compartment, use the pair of GWD3468 crosspieces, to be ordered separately.
COMPONENTS: Aluminium EN 50022 double rail (DIN 35). CHARACTERISTICS: RAL 7035 grey painted sheet metal panels equipped with rotation hinges and 1/4 turn lock. NOTES: Mounting the DIN rail requires brackets (bracket type depends on the depth of the panel), to be ordered separately.
ACCESSORIES SUPPLIED: no. 1 horizontal wiring trunking support for GWD3311 and no. 2 for horizontal wiring trunking supports for GWD3313. The supports must be mounted on the back of the of the double EN 50022 (DIN 35) rail.
MSX moulded case circuit breakers installation on plate
Installation kit for MCCB's up to 630 A in horizontal position fixed version
ACCESSORIES SUPPLIED: galvanised sheet metal support plate, raiser brackets and pre-drilled panel. CHARACTERISTICS:RAL 7035 grey painted sheet metal panels equipped with rotation hinges and 1/4 turn lock. NOTE: The kits are suitable for 3P and 4P MCCB's.
Installation kit for MCCB's up to 630 A in vertical position fixed version
ACCESSORIES SUPPLIED: galvanised sheet metal support plate, raiser brackets and pre-drilled panel. CHARACTERISTICS: RAL 7035 grey painted sheet metal panels equipped with rotation hinges and 1/4 turn lock. NOTE: The kits are suitable for 3P and 4P MCCB's.
Installation kit for MCCB's up to 630 A fixed version with direct rotary handle
ACCESSORIES SUPPLIED: galvanised sheet metal support plate, raiser brackets and pre-drilled panel. CHARACTERISTICS: RAL 7035 grey painted sheet metal panels equipped with rotation hinges and 1/4 turn lock. NOTE: The kits are suitable for 3P and 4P MCCB's.
Installation kit for MCCB's up to 630 A fixed version with motor operating device
ACCESSORIES SUPPLIED: galvanised sheet metal support plate, raiser brackets and pre-drilled panel. CHARACTERISTICS:RAL 7035 grey painted sheet metal panels equipped with rotation hinges and 1/4 turn lock. NOTE: The kits are suitable for 3P and 4P MCCB's.
MSS switch disconnectors installation on plate
Installation kit for switch disconnectors up to 630 A fixed version
ACCESSORIES SUPPLIED: galvanised sheet metal support plate, raiser brackets and pre-drilled panel. CHARACTERISTICS:RAL 7035 grey painted sheet metal panels equipped with rotation hinges and 1/4 turn lock. NOTE: The kits are suitable for 3P and 4P MCCB's.
CHARACTERISTICS: The GWD3346, GWD3347, GWD3348 and GWD3349 bottom plates replace the functional frames and can be adjusted in depth. NOTES: The GWD3346, GWD3347, GWD3348 and GWD3349 bottom plates are not suitable for boards with a functional depth of 250 mm.
CHARACTERISTICS: plastic dividers to realize Form 2 configuration in the case of busbars mounted in the side and external compartment. NOTES: segregation not suitable for wall-mounting boards.
CHARACTERISTICS: metal dividers used to divide the distribution board into sections. NOTES: GWD3377 and GWD3378 are not suitable for wall-mounting distribution boards.
CHARACTERISTICS: plastic adapter for compensation of the different installation depths on DIN rail EN 50022 of the modular devices (90 range) and moulded case circuit breakers (MSX range).
CHARACTERISTICS: allows the installation of vertical wiring trunkings with heights H=40 mm, H=60 mm or H=80 mm. NOTES:not suitable for distribution boards with functional depth P= 200/ 250 mm.
Pair of supports for horizontal terminal block and earth bar
CHARAKTERYSTYKA: wentylator pobiera powietrze z zewnątrz i wprowadza je do tablicy rozdzielczej, wytwarzając lekkie nadciśnienie zapobiegające wnikaniu obcych cząsteczek. Maks. wydajność wentylatora 60 m³/h. Moc pobierana równa 20 W. ZASTOSOWANIA: wentylacja wymuszona w krytycznych warunkach termicznych. WYPOSAŻENIE DODATKOWE W ZESTAWIE: szablon do wiercenia.
Błąd podczas wysyłania żądania.
Prosimy, spróbuj później!
Dziękuję!
Twoja prośba została wysłana pomylśnie
✕
Twoja prywatność jest dla nas ważna.
Firma Gewiss wykorzystuje własne techniczne pliki cookie oraz pliki cookie podmiotów zewnętrznych w celu zapewnienia prawidłowego funkcjonowania witryny oraz do celów statystycznych, a także, za zgodą użytkownika, profilowane pliki cookie w celu zapewnienia spersonalizowanych wrażeń i reklam ukierunkowanych na podstawie analizy nawigacji użytkownika. Klikając „Akceptuj wszystkie”, wyrażasz zgodę na wszystkie pliki cookie profilujące Jeśli zamkniesz ten baner, klikając „X”, możesz kontynuować przeglądanie bez instalowania profilujących plików cookie. Zawsze możesz zmienić swoje preferencje, korzystając z funkcji oferowanych przez Gewiss, przechodząc do strony „Polityka plików cookie” za pośrednictwem łącza w stopce u dołu każdej strony na Witrynie. Więcej informacji można znaleźć w naszej Polityce prywatności i Polityce plików cookie.
Firma Gewiss i niektóre podmioty zewnętrzne wykorzystują pliki cookie znajdujące się na stronie „gewiss.com”.
Firma Gewiss wykorzystuje własne techniczne pliki cookie oraz pliki cookie podmiotów zewnętrznych w celu zapewnienia prawidłowego funkcjonowania witryny oraz do celów statystycznych, a także, za zgodą użytkownika, profilowane pliki cookie w celu zapewnienia spersonalizowanych wrażeń i reklam ukierunkowanych na podstawie analizy nawigacji użytkownika. Klikając „Zezwól na wszystkie”, wyrażasz zgodę na wszystkie pliki cookie profilujące
Zarządzaj preferencjami:
+
Techniczne pliki cookie
technical
Techniczne pliki cookie są niezbędne do umożliwienia korzystania ze strony internetowej, na przykład poprzez umożliwienie dostępu do obszarów chronionych. Zgoda użytkownika nie jest wymagana do ich funkcjonowania. Bez tych plików cookie prawidłowe poruszanie się po stronie internetowej może być trudne lub niemożliwe.
+
Funkcjonalne pliki cookie
Funkcjonalne pliki cookie umożliwiają stronie internetowej przechowywanie informacji, które wpływają na jej zachowanie lub wygląd na podstawie żądań użytkowników. Do ich funkcjonowania wymagana jest zgoda użytkownika.
+
Statystyczne pliki cookie
Statystyczne pliki cookie pozwalają nam zrozumieć, w jaki sposób użytkownicy korzystają ze strony internetowej, wspierając Administratora w zrozumieniu głównych form interakcji. Do ich funkcjonowania wymagana jest zgoda użytkownika.
+
Marketingowe pliki cookie
Marketingowe pliki cookie służą do śledzenia odwiedzających, na przykład do prezentowania treści interesujących indywidualnego użytkownika. Do ich funkcjonowania wymagana jest zgoda użytkownika.
Wymagane pole
Check that the e-mail is not already used or that all the fields have been enhanced
Sprawdź swój email
hasło musi zawierać od 6 do 12 znaków, cyfrę oraz literę
Rejestracja została pomyślnie zakończona
Uwaga: Niepoprawna nazwa użytkownika i/lub hasło
Wprowadź poprawny adres e-mail
niezgodna wartość
Modyfikacja danych została pomyślnie zakończona
To fill the form you must be logged. Please go to
login page
e-mail/ wiadomość wysłana pomylśnie
Wpisany
Dziękuję!
Twoja prośba została wysłana pomylśnie
Błąd uwierzytelniania
Błąd podczas wysyłania żądania
Prosimy, spróbuj później!
Użytkownik nie znaleziony
Błąd integracji
Skontaktuj się z administratorem
Jesteś już zarejestrowany na wydarzeniu
Sprawdź kartę
Zmiana hasła została pomyślnie zakończona
hasło musi zawierać od 6 do 12 znaków, cyfrę oraz literę
Wpisz wiadomość w odpowiednim polu
Błąd podczas wysyłania żądania. Prosimy, spróbuj później!
Zapisz na liście
Wstaw nazwę katalogu
Przedawniony
Aby pobrać plik, musisz wybrać odpowiedni profil podczas rejestracji, przejdź do modyfikacji i zmień profil
Aby pobrać plik, musisz być zalogowany jako instalator lub hurtownik. Zmień profil.
For the download of the file you have to be a professionist installer or wholesaler, a designer or lighting designer. Upgrade your profile on my profile page!
IDŹ
Podany kod jest niedostępny, spróbuj się zalogować
The date must be of the indicated format
Lista
Stworzone przez
Select
Account not yet confirmed, please confirm the link we sent you by mail