SYSTEM - Domestic range Modular devices

CHARACTERISTICS: the illuminable articles use miniature lamp units, not included.
ACCESSORIES SUPPLIED: GW20572, GW20504 - red fluorescent 230Vac (0.4W) signalling unit. GW20005 supplied with 2 keys. The key can be extracted in both positions. Spare keys: GW20901.

CHARACTERISTICS: suitable for particular heavy-duty loads (e.g. set of fluorescent lamp) or high consumption devices (ovens, air-conditioners, boilers, etc.).

CHARACTERISTICS: the illuminable articles use miniature lamp units, not included.
ACCESSORIES SUPPLIED: GW20577 - red fluorescent 230Vac (0.4W) signalling unit. GW20008 supplied with 2 keys. The key can be extracted in both positions. Spare keys: GW20901.

CHARACTERISTICS: three standing positions. Both contacts are open in the central position (OFF).
GW20528 - not-illuminated product; equipped with neutral lens.
APPLICATIONS: command of circuits requiring an interlock (e.g. operating motorised devices with direction reversal). 2-user selective control.

CHARACTERISTICS: three standing positions. Both contacts are open in the central position (OFF). With 6 terminal blocks.
APPLICATIONS: command of circuits requiring an interlock (e.g. operating motorised devices with direction reversal). 2-user selective control.

CHARACTERISTICS: the illuminable articles use miniature lamp units, not included. GW20520, GW20521, both contacts are open in the central position (OFF).
ACCESSORIES SUPPLIED: GW20515 - red fluorescent 230Vac (0.4W) signalling unit. GW20516 - white LED 12/24Vac/dc (0.4W) signalling unit. GW20518, cord in insulating material, 140cm long, with a knob. GW20530 supplied with 2 keys. Spare keys: GW30912.

CHARACTERISTICS: supplied without lamp.

CHARACTERISTICS: the illuminable articles use miniature lamp units, not included.

APPLICATIONS: in addition to their normal use, they permit installing signal socket-outlets, microswitches and LEDs after appropriate drilling/preparation.

NOTES: to be used in place of the neutral lens supplied with the illuminable command devices.

CHARACTERISTICS: adjustment of the intervention duration 15 sec - 10 min. Light sensitive threshold adjustment - min. 10 lux - max. inhibited. Sensor with fixed lens. Suitable for commanding halogen lamps/resistive loads: 700 W, incandescent lamps: 450 W, low voltage halogen lamps (12 V) controlled by toroidal or electronic transformers: 450 W, uncompensated fluorescent lamps: 2x58 W, motors and gear motors: 400 VA. Not suitable for compensated fluorescent lamps, for discharge lamps and for all loads not indicated that must be commanded using a support relay.
APPLICATIONS: Energy-saving: command of the lighting of rooms and areas only when people pass through. Comfort and safety: automatic command of circuits without needing to activate one-way switches.
NOTES: do not install the product in watertight plates: the lid membrane does not allow the detector lens to work correctly.

CHARACTERISTICS: suitable for commanding incandescent/halogen lamps: 800 W, fluorescent tubes with electronic ballast: 400 W, fluorescent tubes with electromechanical ballast: 360 W, compact fluorescent lamps (CFL): 200 W, LED lamps (230V ac): 200 W, low voltage halogen or LED lamps with electronic ballast: 200 W, low voltage halogen or LED lamps with electromechanical ballast: 400 W.
APPLICATIONS: command of lighting devices from several points, via push-buttons. Start/stop control of motors (extractors, air agitators, etc.).

APPLICATIONS: As an auxiliary element to control special loads, for remote signalling, and for electrical separation between control and user circuits.

CHARACTERISTICS: reset button integrated on the front and green mains presence indicator lamp.

CHARACTERISTICS: with safety shields.

CHARACTERISTICS: with safety shields.

CHARACTERISTICS: with safety shields. The wiring is carried out via 3 terminals that power the socket-outlets, without using U-bolts.

CHARACTERISTICS: with safety shields.

CHARACTERISTICS: with safety shields.

CHARACTERISTICS: with safety shields.
NOTES: given the size of the plugs, it is not possible to install two or more socket-outlets side-by-side.

NOTES: contact Gewiss customer service to check if the product meets the regulations of the country concerned before purchasing it. The socket is no longer compliant with Swiss standard SEV1011 of 2009.

CHARACTERISTICS: with safety shields. Pre-arranged for housing miniature lamps, not included.

CHARACTERISTICS: with safety shields.

CHARACTERISTICS: with safety shields.

CHARACTERISTICS: with safety shields.

CHARACTERISTICS: with safety shields.

CHARACTERISTICS: with safety shields.

CHARACTERISTICS: with safety shields. Pre-arranged for housing miniature lamps, not included.

CHARACTERISTICS: with safety shields. Pre-arranged for housing miniature lamps, not included.

CHARACTERISTICS: GW20391 permits carrying a remote power supply voltage/current and/or control signals towards the user port (max 24 V - 500 mA). GW20277 in combination with feedthrough socket-outlets allows you to make terminal socket-outlets.
APPLICATIONS: Socket-outlets suitable for return channel.
NOTES: the TV-SAT 5 dB GW20396 coaxial socket-outlet is defined with conditioned use, it is a special through socket-outlet and as such must be used, with the only difference that the user door (socket-outlet towards the user device) must always be closed with a load of 75 Ohm (TV, VCR, SAT receiver or 75-Ohm termination).

CHARACTERISTICS: GW20381 permits carrying a remote power supply voltage/current and/or control signals towards the user port (max 24 V - 500 mA). GW20277 in combination with feedthrough socket-outlets allows you to make terminal socket-outlets.
APPLICATIONS: Socket-outlets suitable for return channel.
NOTES: the TV 5 dB GW20386 coaxial socket-outlet is defined with conditioned use, it is a special through socket-outlet and as such must be used, with the only difference that the user door (socket-outlet towards the user device) must always be closed with a load of 75 Ohm (TV, VCR, SAT receiver or 75-Ohm termination).

Items designated solely for export to a limited number of countries outside of the European Union or countries applying to become part of the European Free Trade Area.
Contact Gewiss Customer Service to check the product meets the regulations of the country concerned before importing it.

APPLICATIONS: telephone, telefax, modem.

APPLICATIONS: LANs up to 100MHz (e.g. Ethernet, Token Ring networks) for cat. 5e. LANs up to 250MHz (e.g. Videoconference systems, CCTV) for cat. 6.

NOTES: with regard to the technological developments and dimensional variants introduced by connector manufacturers, you are advised to check in advance the full compatibility between the connector and the Gewiss adapter.

CHARACTERISTICS: cable outlet inclined of 40° to the wall line. With ceramic fiber optic sleeve and dust caps. The front output is protected with safety cap and unmissable cord. Suitable to join two single-mode SC/APC fiber optic patch cables.
NOTES: for adapters (Chorus, System and Dahlia) with Keystone Jack coupling.

NOTES: for adapters designed to house data connectors (Chorus, System and Playbus) with Keystone Jack type coupling and permutation panels.

CHARACTERISTICS: equipped with two USB, A-type, female connectors that supply a total of 2.1A.
APPLICATIONS: suitable to recharge a single 2.1A electronic device (e.g.: tablet) or a couple of simultaneous devices (e.g.: tablet and smartphone). The total current provided (max. 2.1A) is split in the two USB outputs, depending on the state of charge of the connected devices.

APPLICATIONS: BNC 50 Ohm (Ethernet networks); BNC 75/93 Ohm (video control systems, terminal connection).

APPLICATIONS: protection of electronic equipment (TV - HI-FI - computers, etc.) from overvoltage of atmospheric or manoeuvring origin that may be conveyed by the supply lines.

CHARACTERISTICS: with signalling led orange. GW20811 rotary command with two-way switch.
GW20803 compliance with the EMC requirements is only guaranteed by connecting the regulator to an LC filter with the following characteristics: L=1mH - 5A, C=0.15uF - 275V X2, according to the documentation provided with the product. Item designated solely for export to a limited number of countries outside of the European Union or countries applying to become part of the European Free Trade Area. Contact Gewiss Customer Service to check the product meets the regulations of the country concerned before importing it.
NOTES: to avoid overheating, the side-by-side installation of several products in a single container is not permitted; insert a blanking module between two electronic devices. If installing two regulators in the same box, the maximum loads that can be commanded by each regulator must be reduced by 50%.

CHARACTERISTICS: possibility to command and regulate from remote control push-buttons with NO contact. With signalling led orange.
NOTES: to avoid overheating, the side-by-side installation of several products in a single container is not permitted; insert a blanking module between two electronic devices. If installing two regulators in the same box, the maximum loads that can be commanded by each regulator must be reduced by 50%.

CHARACTERISTICS: possibility to command and regulate from remote control push-buttons with NO contact. With signalling led blue. Product extremely silent.
NOTES: to avoid overheating, the side by side installation of several products in a single container is not permitted; insert a blanking module between two electronic devices. If installing two regulators in the same box, the maximum loads that can be commanded by each regulator must be reduced by 50%.

CHARACTERISTICS: possibility to command and regulate at fixed steps also from remote control push-buttons with NO contact. With signalling led red.
APPLICATIONS: suitable for adjusting air agitators, fans and extractors with induction motors.
NOTES: to avoid overheating, the side by side installation of several products in a single container is not recommended; insert a blanking module between two electronic devices.

CHARACTERISTICS: with rechargeable buffer battery to guarantee the updating of the calendar (date, day, time) in the event of a blackout.

CHARACTERISTICS: powered by 3x1.5V AAA alkaline batteries, not included. Average battery life: 1 year.
Automatic energy saving and comfort function.
Kit for wall-mounting, containing: two strips of double-sided adhesive tape, two ø 6mm wall plugs with screws.

CHARACTERISTICS: with rechargeable buffer battery to guarantee the updating of the calendar (date, day, time) in the event of a blackout.

CHARACTERISTICS: option of controlling night-time reduction via remote control (fixed 4°c).

CHARACTERISTICS: temperature adjustment range: from +5°C to +30°C.
Operating modes: solenoid valve thermostat and fixed ventilation, solenoid valve and thermostat-controlled ventilation, only thermostat-controlled ventilation and unconnected solenoid valve.

CHARACTERISTICS: equipped with inhibition selector on the front. Replaceable batteries (battery pack 4.8 V 40 mAh).
APPLICATION: according to CEI 64-8 (chapter 37).

CHARACTERISTICS: green LED for the presence of mains voltage signalling. Highly efficient, white LED lamp.

CHARACTERISTICS: for intermittent use (5 sec. ON / 15 sec. OFF).

CHARACTERISTICS: for intermittent use (5 sec. ON / 15 sec. OFF).

CHARACTERISTICS: for continuous use. Three tones (alarm, ring and two-tone) with adjustable sound intensity using the selector located on the front.
APPLICATIONS: it is possible to combine the outdoor call, indoor call and alarm functions with one single device.

CHARACTERISTICS: supplied without lamp. They use S6x31 mm and S6.3x28 mm cartridge lamps (max 2 W).
NOTES: the meaning of the diffusers refers to the recommendations of standard EN60073 with regard to the use of the colours in indicator lights.

ACCESSORIES SUPPLIED: supplied with LED lamps.

CHARACTERISTICS: very bright LED, light adjustment eyelid, 12v ac/dc - 230V ac supply with double supply input.

CHARACTERISTICS: Supplied without lamp. Use cartridge lamps of the S6x36mm type (max 2W).
APPLICATIONS: identification of steps, obstacles etc..

CHARACTERISTICS: Supplied without lamp. Use cartridge lamps of the S6x36mm type (max 2W).
APPLICATIONS: signalling.

APPLICAZIONI: l’installazione del prodotto deve avvenire nel rispetto della norma CEI 64-8.

CHARACTERISTICS: relay output for the automatic command of the gas interception solenoid valve (manual reset) GW30522. Sound intensity: 85dB at 1m.

CHARACTERISTICS: relay output for the automatic command of the gas interception solenoid valve (manual reset) GW30522. Sound intensity: 85dB at 1m.

CHARACTERISTICS: the alarm detects the presence of water and includes a temperature sensor. Powered by CR123-type battery (replaceable).
NOTES: floor-mounting or alternatively wall-mounting possibility through the GWA1541 accessory. To be used in combination with the ZigBee actuator GWA1521 when controlling an electrovalve or a load.

CHARACTERISTICS: 1-channel actuator for activating loads via the potential-free output contact (NO). Suitable for commanding incandescent lamps (230 V ac): 2300W, loads controlled from toroidal transfomers: 450W, loads controlled from electronic transformers: 600W, energy saving lamps (compact fluorescent): 150W, LED lamps (230 V ac): 150W, motors: 500W.
APPLICATIONS: when used with the water sensor, provide the installation of a NO push-button to open the electrovalve manually.
NOTES: installation in flush-mounting boxes, junction boxes, etc..

APPLICATIONS: to be used for the wall-mounting of the ZigBee flood alarm GWA1514.

APPLICATIONS: to be used for powering LPG detectors (GW10711, GW12711, GW14711, GW20868, GW21868, GW30520), methane detectors (GW10712, GW12712, GW14712, GW20867, GW21867, GW30519); Thermo ICE WiFi (GW16972CB, GW16972CN, GW16972CT) and KNX/Easy (GW16974CB, GW16974CN, GW16974CT) thermostats.

CHARACTERISTICS: three standing positions. Both contacts are open in the central position (OFF). With "Do not disturb" (DND) and "Make up the room" (MUR) pad printings.

CHARACTERISTICS: supplied with LED lamps (red for DND signalling, green for MUR signalling).

CHARACTERISTICS: supplied without badge.
APPLICATIONS: activation of circuits and services in hotel rooms (e.g. lights, air-conditioner, fridge-bar), indication of room occupied (with badge inserted).

CHARACTERISTICS: the socket-outlet is equipped with a self-protection device against overloading. The output voltage should be selected correctly, consulting the rating of the user device before inserting the plug. The relevant indicator LED allows the chosen voltage to be clearly seen.
NOTES: not suitable for installation in wall-mounting containers of the 27 COMBI range.

CHARACTERISTICS: the illuminable articles use miniature lamp units, not included.
ACCESSORIES SUPPLIED: GW21572, GW21504 - red fluorescent 230Vac (0.4W) signalling unit. GW21005 supplied with 2 keys. The key can be extracted in both positions. Spare keys: GW20901.

CHARACTERISTICS: suitable for particular heavy-duty loads (e.g. set of fluorescent lamp) or high consumption devices (ovens, air-conditioners, boilers, etc.).

CHARACTERISTICS: the illuminable articles use miniature lamp units, not included.
ACCESSORIES SUPPLIED: GW21577 - red fluorescent 230Vac (0.4W) signalling unit. GW21008 supplied with 2 keys. The key can be extracted in both positions. Spare keys: GW20901.

CHARACTERISTICS: three standing positions. Both contacts are open in the central position (OFF).
GW21528 - not-illuminated product; equipped with neutral lens.
APPLICATIONS: command of circuits requiring an interlock (e.g. operating motorised devices with direction reversal). 2-user selective control.

CHARACTERISTICS: the illuminable articles use miniature lamp units, not included; GW21520, GW21521, both contacts are open in the central position (OFF).
ACCESSORIES SUPPLIED: GW21515 - red fluorescent 230Vac (0.4W) signalling unit. GW21516 - white LED 12/24Vac/dc (0.4W) signalling unit. GW21518, cord in insulating material, 140cm long, with a knob. GW21530 supplied with 2 keys. Spare keys: GW30912.

CHARACTERISTICS: supplied without lamp.

CHARACTERISTICS: the illuminable articles use miniature lamp units, not included.

APPLICATIONS: in addition to their normal use, they permit installing signal socket-outlets, microswitches and LEDs after appropriate drilling/preparation.

NOTES: to be used in place of the neutral lens supplied with the illuminable command devices.

CHARACTERISTICS: adjustment of the intervention duration 15 sec - 10 min. Light sensitive threshold adjustment - min. 10 lux - max. inhibited. Sensor with fixed lens. Suitable for commanding halogen lamps/resistive loads: 700 W, incandescent lamps: 450 W, low voltage halogen lamps (12 V) controlled by toroidal or electronic transformers: 450 W, uncompensated fluorescent lamps: 2x58 W, motors and gear motors: 400 VA. Not suitable for compensated fluorescent lamps, for discharge lamps and for all loads not indicated that must be commanded using a support relay.
APPLICATIONS: Energy-saving: command of the lighting of rooms and areas only when people pass through.
Comfort and safety: automatic command of circuits without needing to activate one-way switches.
NOTES: do not install the product in watertight plates: the lid membrane does not allow the detector lens to work correctly.

CHARACTERISTICS: suitable for commanding incandescent/halogen lamps: 800 W, fluorescent tubes with electronic ballast: 400 W, fluorescent tubes with electromechanical ballast: 360 W, compact fluorescent lamps (CFL): 200 W, LED lamps (230V ac): 200 W, low voltage halogen or LED lamps with electronic ballast: 200 W, low voltage halogen or LED lamps with electromechanical ballast: 400 W.
APPLICATIONS: command of lighting devices from several points, via push-buttons. Start/stop control of motors (extractors, air agitators, etc.).