Een compleet systeem met componenten en accessoires voor LAN-netwerkbekabeling. De serie omvat opbouwborden en vloerbehuizingen van 10” (25, 4 cm) en 19” (48, 26 cm), met een modern en innovatief design en extreem eenvoudige bekabeling dankzij de grote interne volumes en zijruimte. Deze oplossingen beperken de installatietijd en zijn op elk moment snel te configureren dankzij de nieuwe gebruiksvereisten.
APPLICATIONS: the Building Optical Services Cabinet is the central element in the building multiservice wiring. It collects the optical signals from the Building Fiber Termination Box and from the Multi-dwelling Unit and splits them to each apartment. CHARACTERISTICS: made from sheet steel, powder coated and texture finish. The cabinet consists of two lockable storage compartments: the main compartment comes with a 8-module rack for optical splitters (GW38306, GW38307, GW38308, GW38309), patch panels (GW38320) and max. 4 caddies for optical fibers (GW38321); the side compartment is reserved for telecommunication service providers and can accommodate up to 34 SC/APC adapters (not included). The cabinet is provided with knock outs (Ø22mm, Ø50mm, Ø60mm) and an adjustable slot for the passage of the optical fiber cables. The cabinet can manage up to 16 apartment units. ACCESSORIES SUPPLIED: two sets of 2 keys to access independently to each compartment, screws for mounting accessories, membrane cable glands. NOTES: wall mounting with wall plugs. As an alternative, the cabinet can be mounted into 19" rack cabinets thanks to the GW38322 brackets (not included), with an occupation of 4 rack units. The cabinets can be stacked vertically thanks to foldable wings.
CHARACTERISTICS: made from sheet steel, powder coated and texture finish. The cabinet comes with a large interior space to accomodate the excess part of the optical fiber cables. It is provided with knock outs (Ø60mm) and an adjustable slot for the passage of the optical fiber cables. NOTES: wall mounting with wall plugs. As an alternative, the cabinet can be mounted into 19" rack cabinets thanks to the GW38322 brackets (not included), with an occupation of 5 rack units. The cabinets can be stacked vertically thanks to foldable wings.
CHARACTERISTICS: fitted with SC/APC input/output adapters for single-mode fibers. NOTES: screw fastening on the rack of the building optical services cabinet (GW38301).
CHARACTERISTICS: made of plastic material. The panel can house up to 9 SC/APC adapters (e.g.: GW38326) not included. NOTES: screw fastening on the rack of the building optical services cabinet (GW38301).
CHARACTERISTICS: made from sheet steel, powder coated and texture finish. ACCESSORIES SUPPLIED: screws for fixing the brackets to the GW38301 or GW38302 cabinets. NOTES: the brackets allow GW38301 and GW38302 to be mounted in 19" rack cabinets.
APPLICATIONS: the Building Fiber Termination Box ends the building riser. It collects the optical signals from the top side of the building (TV, SAT, wireless providers, etc.) and send them to the Building Optical Services Cabinet. CHARACTERISTICS: made of plastic material with lockable 180 degrees opening lid. The box has 2 riser cable inlets, 12 outlets for optical fibers, flip splice tray, internal guides to accomodate the excess part of the optical fibers. Suitable to house up to 12 SC/APC adapters (e.g.: GW38326) not included. ACCESSORIES SUPPLIED: set of 2 keys, 3 wall plugs for wall mounting, 4 plastic strips to fasten cables, 12 heat shrink fiber optic splice sleeves, 12 fiber optic cable glands.
APPLICATIONS: the Compact Termination Box collects, in each apartment, the optical signals from the Building Optical Services Cabinet. CHARACTERISTICS: made of plastic material with snap-in removable lid, flip splice tray and internal guides to accomodate the excess part of the optical fibers. The box includes 4 SC/APC adapters with dust covers and knockout holes, on all sides, for cable inlets. ACCESSORIES SUPPLIED: 4 heat shrink fiber optic splice sleeves and 2 wall plugs for wall mounting. NOTES: the box can be installed inside the multimedia distribution board.
Compact termination boxes with 4-fiber optic cable - Fiber Fast system
APPLICATIONS: the Compact Termination Boxes collect, for each apartment, the optical signals from the Building Optical Services Cabinet. The boxes are provided with 4-fiber optical cables with predefined cable lengths. CHARACTERISTICS: made of plastic material with snap-in removable lid, flip splice tray and internal guides to accomodate the excess part of the optical fibers. The boxes include 4 SC/APC adapters with dust covers and are supplied with single-mode, 4-fiber, G.657.A2 Bend Insensitive, CPR Eca class, LSZH sheath optical fiber cables. The cables are provided with pulling sheath in kevlar. From one side they are pre-terminated with SC/APC connectors and on the other side they come with ferrules protected by heat shrink tube, to be terminated, after laying in ducts, with the SC/APC connectors supplied, without the use of tools (Fiber Fast system). ACCESSORIES SUPPLIED: the items are supplied in a cardboard box complete with a compact termination box and an optical fiber cable reel. The package includes 2 wall plugs for wall mounting and a kit with 4 SC/APC connectors to terminate the sides of the optical fiber provided with the ferrule. NOTES: the box can be installed inside the multimedia distribution board.
CHARACTERISTICS: made from painted sheet steel. The box is suitable to house up to 8 SC/APC adapters (e.g.: GW38326). ACCESSORIES SUPPLIED: 4 SC/APC adapters, screws for fixing. NOTES: mounting on the bottom of flush-mounting junction boxes for concrete walls (e.g.: GW48006), lightweight and plasterboard walls (e.g.: GW48006PM) or in wall mount boxes (GW44207).
Multimedia enclosures
Multimedia enclosure compact version 36 DIN modules - White ral 9016 - Blank door
APPLICATIONS: multimedia Enclosures allow the distribution of the services through the apartment (e.g. internet, phone, satellite TV, etc.). The compact version is dedicated to small apartments with a small amount of services. FEATURES: the product is compliant to the CEI 306-2 Guide. The back box features plastic tab for an easier installation on metal frames and drywall panels. The product can be joint vertically with other enclosures of the the CDKi range (minimum size 36 DIN modules) through the GW40425 tool. ACCESSORIES SUPPLIED: the GW40390C is composed of 1 pc front cover with blank door, 1 pc detachable frame with 2 pcs perforated mounting plates (1 pc with 18 Keystone Jack slot), 2 m velcro roll h=16 mm, 4 pcs brackets, 4 pcs self-adhesive cable clips with cable ties, 5 pcs. RJ45 Cat.6 Keystone Jack. INSTALLATION: the product can be installed on both drywall and hollow bricks.
Multimedia enclosure compact version 54 DIN modules - White ral 9016 - Blank door
APPLICATIONS: multimedia Enclosures allow the distribution of the services through the apartment (e.g. internet, phone, satellite TV, etc.). The full version is dedicated to big apartments and villas with a huge amount of services and devices that have to be connected. FEATURES: the product is compliant to the CEI 306-2 Guide. The back box features plastic tab for an easier installation on metal frames and drywall panels. The product can be joint vertically with other enclosures of the the CDKi range (minimum size 36 DIN modules) through the GW40425 tool. ACCESSORIES SUPPLIED: the GW40390F is composed of 1 pc front cover with blank door, 1 pc detachable frame with 3 pcs perforated mounting plates (1 pc with 18 Keystone Jack slot), 3 m velcro roll h=16 mm, 6 pcs brackets, 6 pcs self-adhesive cable clips with cable ties, 6 pcs. RJ45 Cat.6 Keystone Jack, 6 pcs patch cord RJ45-RJ45 Cat.6 0,6 m, 1 pc thelephone splitter with 5 RJ11 socket and 5 pcs patch cord RJ11-RJ45, 1 pc multiple socket with 4 Italian/German socket 2P+T 16A. INSTALLATION: the product can be installed on both drywall and hollow bricks.
APPLICATIONS: multimedia Boards allow the distribution of the services from the DOMO CENTER through the apartment (e.g. internet, phone, satellite TV, etc.). This version is dedicated to big apartments and villas with a huge amount of services and devices that have to be connected. FEATURES: the product is compliant to the CEI 306-2 Guide. ACCESSORIES SUPPLIED: 2 pcs vertical wiring trunking 80x60 mm, 1 kit fixing screws, 1 pc frame with 3 pcs perforated mounting plates (1 pc with 18 Keystone Jack slot), 3 m velcro roll h=16 mm, 6 pcs brackets, 6 pcs self-adhesive cable clips with cable ties, 6 pcs. RJ45 Cat.6 Keystone Jack, 6 pcs patch cord RJ45-RJ45 Cat.6 0,6 m, 1 pc thelephone splitter with 5 RJ11 socket and 5 pcs patch cord RJ11-RJ45, 1 pc multiple socket with 4 Italian/German socket 2P+T 16A. INSTALLATION: the finishing panel GWN1122XB can be used for better aesthetics and protection.
CHARACTERISTICS: single-mode, single-fiber, G.657.A2 Bend Insensitive, LSZH sheath optical fiber cables. The fibers are pre-terminated on both sides with SC/APC connectors. GW38317, GW38318, GW38319 are strengthened with a core of kevlar NOTES: for indoor use. For mobile installation.
SC/APC single-fiber optic cables - Fiber Fast system
CHARACTERISTICS: single-mode, single-fiber, G.657.A2 Bend Insensitive,LSZH sheath optical fiber cables. The cables are provided with pulling sheath in kevlar and come on both sides with ferrules protected by heat shrink tube, to be terminated, after laying in ducts, with the SC/APC connectors supplied, without the use of tools (Fiber Fast system). ACCESSORIES SUPPLIED: 2 SC/APC connectors to terminate the sides of the optical fiber provided with the ferrule. NOTES: for indoor use.
CHARACTERISTICS: single-mode, 8-fiber, G.657.A2 Bend Insensitive,LSZH sheath optical fiber cables. The cables are provided with pulling sheath in kevlar and are pre-terminated on one side with SC/APC connectors and on the other one they come with ferrules protected by heat shrink tube, to be terminated, after laying in ducts, with the SC/APC connectors supplied, without the use of tools (Fiber Fast system). ACCESSORIES SUPPLIED: supplied in a cardboard box complete with an optical fiber cable reel. It includes 8 SC/APC connectors to terminate the sides of the optical fiber provided with the ferrule. NOTES: for indoor use. Suitable to realize building risers.
CHARACTERISTICS: with ceramic fiber optic sleeve, snap-fit assembly and dust caps. Suitable to join two single-mode SC/APC fiber optic patch cables. NOTES: for optic patch panel drawers, building optical service cabinets, building fiber termination boxes, apartment termination boxes, etc.
CHARACTERISTICS: cable outlet inclined of 40° to the wall line. With ceramic fiber optic sleeve and dust caps. The front output is protected with safety cap and unmissable cord. Suitable to join two single-mode SC/APC fiber optic patch cables. NOTES: for adapters (Chorus, System and Dahlia) with Keystone Jack coupling.
CHARACTERISTICS: suitable to house up to 3 splices and max 4m optical fiber (with ø 0.9 mm cable). ACCESSORIES SUPPLIED: 4 plastic strips to fasten the excess part of the optical fiber cable. NOTES: coupling on the rear or 3-gang supports (e.g.: GW16803).
EIGENSCHAPPEN: aansluitklemmen met zonder gereedschap geperforeerde isolatie. OPMERKINGEN: voor patchpanelen en adapters (Chorus, System en Dahlia series) met Keystone Jack-koppeling.
PRODUCTIE-EIGENSCHAPPEN: 24 AWG koperen geleider. Vuurvaste polyethyleenisolatie. Stekkercontacten uit fosforbrons. PRESTATIE-EIGENSCHAPPEN: hogere prestaties dan beoogd voor cat. 5e. Conform de vereiste voorschriften voor toepassingen zoals 100BASE-Tx, 155Mbps ATM en gigabitethernet. ELEKTRISCHE KENMERKEN BIJ 20 °C: Impedantie 100 Ohm +/- 15% 1-100 MHz; Capaciteit: 13, 5 pF/ft bij 1 MHz.
Kabels
Koperen kabels, 4 paar, getwist, niet afgeschermd - UTP
EIGENSCHAPPEN: aansluitklemmen met zonder gereedschap geperforeerde isolatie. OPMERKINGEN: voor patchpanelen en adapters (Chorus, System en Dahlia series) met Keystone Jack-koppeling.
CONSTRUCTIE-EIGENSCHAPPEN: 24 AWG koperen geleider. Vuurvaste polyethyleenisolatie. Stekkercontacten uit fosforbrons. PRESTATIE-EIGENSCHAPPEN: hogere prestaties dan beoogd voor cat. 5e. Conform de vereiste voorschriften voor toepassingen zoals 100BASE-Tx, 155Mbps ATM en gigabitethernet. ELEKTRISCHE KENMERKEN BIJ 20 °C: Impedantie 100 Ohm +/- 15% 1-100 MHz. Capaciteit: 13, 5 pF/ft bij 1 MHz.
CHARACTERISTICS: made from sheet steel, powder coated, texture finish, with upper and lower cable entry. Movable and reversing 180° opening door with tempered glass window. Uprights adjustable in depth. Static load capacity 15Kg. ACCESSORIES SUPPLIED: lock with 2 keys; earthing set.
CHARACTERISTICS: GW38442, GW38443, GW38444, GW38445 made from painted sheet steel, wrinkle texture. GW38446 body in plastic material, with dual pole luminous switch, 3m long cable, 90° 2P+E - 16A fre/ger std plug, power max 3500W. NOTES: GW38443 to be completed with UTP and FTP RJ45 socket-outlets with Keystone Jack coupling (eg: GW38031, GW38032, GW38033, GW38034, GW38035, GW38036). For mounting on 10" wall mount cabinets use the metal small parts kit GW38557.
19" wall mount rack cabinets
19" metal wall mount cabinets with transparent door
CHARACTERISTICS: made from sheet steel, powder coated, texture finish, with upper, lower and rear cable entry. Movable and reversing 180° opening door with tempered glass window. Uprights adjustable in depth. Static load capacity 50Kg. ACCESSORIES SUPPLIED: quick coupling blind side panels, rear panel, roof plate and base; lock with 2 keys; earthing set.
CHARACTERISTICS: made from sheet steel, powder coated, texture finish, with upper and lower cable entry. Movable and reversing 135° opening door with tempered glass window. Uprights adjustable in depth. Static load capacity 1000Kg. ACCESSORIES SUPPLIED: quick coupling blind side and rear panels, roof plate and base; adjustable levelling feet; lock with 2 keys; earthing set.
CHARACTERISTICS: GW38477 suitable for fixing on the vertical cable management bars for the cabinets GW38461, GW38462, GW38463 and GW38464. GW38479 wrinkle texture, equipped with a pair of fans complete of 3m cable with german std plug and a thermostat. NOTES: for mounting the air circulation unit GW38479 on 19" floor rack cabinets use the metal small parts kit GW38557.
CHARACTERISTICS: made from painted sheet steel, wrinkle texture. NOTES: to be completed with UTP and FTP RJ45 socket-outlets with Keystone Jack coupling (eg: GW38031, GW38032, GW38033, GW38034, GW38035, GW38036). For mounting on 19" rack cabinets use the metal small parts kit GW38557.
CHARACTERISTICS: made from painted sheet steel, wrinkle texture. Optic drawers with easy clip opening. NOTES: suitable for SC simplex (GW38326), LC duplex or ST simplex couplers. For mounting on 19" rack cabinets use the metal small parts kit GW38557.
CHARACTERISTICS: made from painted sheet steel, wrinkle texture. The load capacity values (Kg) are referred to a uniformly distributed load. GW38609 not suitable for 19" wall mount cabinets with depth of 400mm. NOTES: for mounting on 19" rack cabinets use the metal small parts kit GW38557.
CHARACTERISTICS: body in plastic material, with dual pole luminous switch, 3m long cable, 90° 2P+E - 16A fre/ger std plug, power max 3500W. NOTES: for mounting on 19" rack cabinets use the metal small parts kit GW38557.
We use technical cookies for optimum navigation. By continuing, you agree to use cookies, otherwise you can disable them from your browser.
Verplicht veld
Controleer of de e-mail nog niet is gebruikt of of alle velden zijn verbeterd
Controleer uw e-mail
Het wachtwoord moet minimaal 6 en maximaal 12 tekens bevatten, een numeriek teken en een hoofdletter
Registratie is voltooid
Let op: gebruikersnaam en wachtwoord komen niet overeen
Voer een geldig e-mailadres in
De waarde komt niet overeen
Gegevenswijziging is succesvol afgerond
To fill the form you must be logged. Please go to
login page
E-mail succesvol verzonden
Ingeschreven
Dank u!
Uw aanvraag is met succes verstuurd
Authenticatiefout
Fout bij verzenden van aanvraag
Probeer later opnieuw!
User not found
Integration error
Neem contact op met de administrator
Je bent al geregistreerd op het evenement
Bekijk de kaart
Wachtwoord wijzigen is succesvol voltooid
Het wachtwoord moet minimaal 6 en maximaal 12 tekens bevatten, een numeriek teken en een hoofdletter
Voer de e-mail in het juiste veld in
Fout bij sturen van verzoek. Probeer later opnieuw!
Opslaan in de lijst
Voor de naam van, de catalogus in
Verlopen
Voor het downloaden van het bestand moet je tijdens de registratie een subtype kiezen, ga je naar het profiel wijzigen en kies je het!
Voor het downloaden van het bestand moet je een professionele installateur of groothandelaar zijn. Upgrade je profiel op mijn profielpagina!
For the download of the file you have to be a professionist installer or wholesaler, a designer or lighting designer. Upgrade your profile on my profile page!
GA
Verify code is expired, please try to login
The date must be of the indicated format
Lijst
Gemaakt door
Select
Account not yet confirmed, please confirm the link we sent you by mail