CHARACTERISTICS: removable and plumbable panels with windows, with exception of GW40605PM. Back plates equipped with tabs for fixing on a metal structure for lightweight and plasterboard walls. Locators for tracing the wall along the edges of the back plate. Horizontal modularity using the joining element GW40425 for enclosure GW40605PM. Vertical modularity using the joining element GW40425 for boards GW40606PM-GW40609PM-GW40610PM-GW40611PM.
NOTES: Dispersible power calculated according to CEI 23-49. Casing type H in accordance with EN60670-1, and type Ha in accordance with IEC60670-1.
GWT 850°C, according to EN 60695-2-11, relative to the green flush-mounting back-mounting box.
ACCESSORIES SUPPLIED: self-tapping screws kit ø 4x45 mm with spacers for fixing of fronts.
INSTALLATION: for the possible enclosure-terminal block combinations, refer to the summary "COMPATIBILITY OF FLUSH-MOUNTING ENCLOSURES WITH BIPOLAR AND UNIPOLAR TERMINAL BLOCKS" in the selection guides of 40CDì range.

ACCESSORIES SUPPLIED: 2 keys.
NOTES: All the keys and relative locks with the same product code are identical.

CHARACTERISTICS: clip fixing.

APPLICATIONS: for CDKi enclosures and boards from 12 modules upwards. Also suitable for 40 CDi decorative enclosures with 8 and 12 modules and for the Home Networking enclosure. For CDKi GREEN WALL enclosures and boards, the GW40425 element permits horizontal paths for the 12M enclosure and vertical paths for 24M to 72M boards.
NOTES: GWT 850 °C according to EN 60695-2-11.

NOTES: they permit making internal separation between the circuits having different voltages located on more than one row inside the same shell.

CHARACTERISTICS: sealing.

ACCESSORIES SUPPLIED: fixing screws. The 80 A terminal blocks are equipped with N and E labels to be placed on the respective spaces to identify the poles.
CHARACTERISTICS: GWT 960°C according to EN60695-2-11.
INSTALLATION: for the possible enclosure-terminal block combinations, refer to the summary "EQUIPPABILITY OF GREEN WALL FLUSH-MOUNTING ENCLOSURES WITH TWO-POLE OR ONE-POLE TERMINAL" within the selection guides for the GREEN WALL range.

ACCESSORIES SUPPLIED: fixing screws.
CHARACTERISTICS: the adapter is pre-drilled for the correct assembly of the terminal block and pre-cut to allow installation also in enclosures with a 12 M modular step.
INSTALLATION: used to expand the numer of possible enclosure-terminal block combinations, refer to the summary "COMPATIBILITY OF FLUSH-MOUNTING ENCLOSURES WITH BIPOLAR AND UNIPOLAR TERMINAL BLOCKS" in the selection guides of GREEN WALL range.

CHARACTERISTICS: the kit can be used for the following flush-mounting ranges: CD Chorus, CDi/CDKi (from 6 modules upwards), 48 CM and 42 RV.

APPLICATIONS: boxes with a built-in DIN rail on the back-mounting box, in accordance with regulations that require to fix by DIN rail the devices that disperse a certain amount of power inside the junction boxes (calculated in compilance with CEI 23-49). ideal for relocation of domotic equipment as actuators, power supplies, etc...
CHARACTERISTICS: surface embossing of the covers to facilitate painting. Pre-arrangement combined horizontal coupling using joining element, code GW48051. Lid protected with heat-shrinking film that also contains the bag of fixing screws. Locators to aid tracing the wall along the edges of the box. Boxes equipped with tabs for direct fixing on panels or a metal structure for lightweight and plasterboard walls. Possibility of fixing directly on the back-mounting box of the box.
ACCESSORIES SUPPLIED: ø3x38 mm screw kit for lid fixing.
NOTES: for the inputs, remove the knockouts after cutting the relative tangs with scissors. Dispersible power calculated according to CEI 23-49. Casing type H in accordance with EN60670-1, and type Ha in accordance with IEC60670-1.
GWT 850°C, according to EN 60695-2-11, relative to the green flush-mounting back-mounting box. Also for KNX devices from DIN rail, domotic devices for domestic ranges, and devices for video entryphones.

APPLICATION: boxes with a built-in DIN rail on the back-mounting box, in accordance with regulations that require to fix by DIN rail the devices that disperse a certain amount of power inside the junction boxes (calculated in compilance with CEI 23-49).
CHARACTERISTICS: Pre-arrangement combined horizontal coupling using joining element, code GW48051. Lid protected with heat-shrinking film that also contains the bag of fixing screws. Locators to aid tracing the wall along the edges of the box. Boxes equipped with tabs for direct fixing on panels or a metal structure for lightweight and plasterboard walls. Possibility of fixing directly on the back-mounting box of the box.
ACCESSORIES SUPPLIED: ø3x38 mm screw kit for lid fixing.
NOTES: for the inputs, remove the knockouts after cutting the relative tangs with scissors. Dispersible power calculated according to CEI 23-49. Casing type H in accordance with EN60670-1, and type Ha in accordance with IEC60670-1.
GWT 850°C, according to EN 60695-2-11, relative to the green flush-mounting back-mounting box. Ideal for medical room applications where the earthing point must be inspectable.

CHARACTERISTICS: in technopolymer. applying the protective shield beneath the lid, the dispersible power of the box is reduced by 2W for GW48006PM, GW48007PM, GW48008PM boxes and by 3W for GW48009.
NOTES: clip fixing to speed up assembly and removal operations. Reusable.

NOTES: the use of the joining element makes it possible to create horizontal and/or vertical sets of boxes PT/PT DIN. For PT DIN GREEN WALL boxes, GW40425 element permits horizontal paths. GW48051 also for the box with transparent lid GW48126PM. GWT 850 °C according to EN 60695-2-11.

CHARACTERISTICS: surface embossing of the covers to facilitate painting.

CHARACTERISTICS: the deep lids are ideal for passing from an exposed system to a chased one. They have a removable front plate and a frame for connecting with trunking.
Max lid H = 49mm for boxes up to 196x152; max lid H = 66mm for boxes up to 392x152 and conduits with max Ø = 32mm.

APPLICATIONS: embedded fixing on the GW44720 support, for coupling with the DIN rail.
NOTES: for the connection capacity, refer to the technical catalogue

NOTES: ideal for applications on boxes of the 48 PT DIN range.
CHARACTERISTICS: supports a combination of terminal blocks with maximum 12-way capacity.
Possible combinations: 3xGW44704; 2xGW44706; 1xGW44704 + 1xGW44706; 1xGW44704 + 1xGW44708; Modular overall dimensions (width): 4.5 modules EN 50022.

APPLICATIONS: especially suitable for creating equipotential nodes.
ACCESSORIES SUPPLIED: self-adhesive label for identification of electrical lines.
NOTES: GW44676 equipped with feedthrough terminals. These allow the creation of cut-outs from the main cables which, unsheathed in the part concerned, are not interrupted.

APPLICATIONS: for fixing the equipotential terminal blocks on the plates or directly on the base inside the junction boxes and watertight boxes.
ACCESSORIES SUPPLIED: screws for fixing the adapter.

ACCESSORIES SUPPLIED: internal dividers, joint elements for combined assembly, self-adhesive symbol labels for circuit identification, and plumbable screws.
NOTES: dispersible power calculated according to IEC 60670-24. Casing type H in accordance with EN60670-1, and type Ha in accordance with IEC60670-1.
GWT 850°C, according to EN 60695-2-11, relative to the green flush-mounting back-mounting box.
CHARACTERISTICS: Locators to aid tracing the wall along the edges of the box. Boxes equipped with tabs for direct fixing on panels or a metal structure for lightweight and plasterboard walls. Possibility of fixing directly on the back-mounting box of the box. Horizontal modularity.

ACCESSORIES SUPPLIED: self-adhesive symbol labels for circuit identification, and plumbable screws.

CHARACTERISTICS: the lid has a removable front plate and a frame for connection with trunking (max h = 65mm) and conduits (max Ø = 40mm).
The frame is fitted for fixing the DIN rails (not supplied).
Pre-arrangement EN 50022: GW48267 horizontal 24 modules (2x12), vertical 24 modules (2x12); GW48271 horizontal 78 modules (26x3), vertical 36 modules (12x3)
ACCESSORIES SUPPLIED: self-adhesive symbol labels for circuit identification, and plumbable screws.

CHARACTERISTICS: high resistance to mechanical stress and crushing. Removal of the knockouts without the use of tools. GW24403PM, GW24404PM, GW24406PM with unlosable metal grips and inserts with adjustable depth for fixing. GW24237PM with tabs for direct fixing on panels or a metal structure.
It is recommended to use a Ø 68 mm hollow mill for the correct installation of the rectangular boxes.
NOTES: Casing type H in accordance with EN60670-1, and type Ha in accordance with IEC60670-1.
GWT 850°C, according to EN 60695-2-11, relative to the green flush-mounting box.

CHARACTERISTICS: high resistance to mechanical stress and crushing. GW24282PM vertical assembly to be used in combination with 2 vertically coupled GW16821 or GW16822 or GW16823 supports, (removing the knockouts located on their contact side) and the Chorus International plates, 2 vertical gangs, 57 mm centre distance; Supplied with 4 fixing screws. GW24234PM to be used in combination with GW16821 or GW16822 or GW16823 supports and the Chorus International plates. Supplied with 4 fixing screws. Removal of the knockouts without the use of tools. It is recommended to use a Ø 65 mm hollow mill for the correct installation of the round boxes.
NOTES: Casing type H in accordance with EN60670-1, and type Ha in accordance with IEC60670-1.
GWT 850°C, according to EN 60695-2-11, relative to the green flush-mounting box. for the inputs, remove the knockouts after cutting the relative tangs with scissors.

APPLICATIONS: GW24101PM for codes Master ICE 10'' GW12010CB and GW12010CN.
GW24237PM for rectangular boxes for 8 gang (4+4) modular ranges.
NOTES: Casing type H in accordance with EN60670-1, and type Ha in accordance with IEC60670-1.
GWT 850°C, according to EN 60695-2-11, relative to the green flush-mounting back-mounting box.
CHARACTERISTICS: boxes equipped with tabs for fixing on a metal structure for lightweight and plasterboard walls.

APPLICATIONS: to separate circuits of different voltages in accordance with Systems Standard IEC 60364 (international) and HD 384 (european).

NOTES: the box cannot house the version with a 24V transformer. Halogen-free casing, in accordance with EN 60754-2. Casing type H in accordance with EN 60670-1, and type Ha in accordance with IEC 60670-1
GWT 850°C, according to EN 60695-2-11, relative to the green flush-mounting back-mounting box.
CHARACTERISTICS: locators for tracing the wall along the edges of the box; box equipped with tabs for direct fixing on panels or a metal structure, for lightweight and plasterboard walls.
ACCESSORIES SUPPLIED: self-tapping screw kit ø 4x45mm.

NOTES: Halogen-free casings, in accordance with EN 60754-2.
Casing type H in accordance with EN 60670-1, and type Ha in accordance with IEC 60670-1.
GWT 850°C, according to EN 60695-2-11, relative to the green flush-mounting back-mounting box.
CHARACTERISTICS: locators for tracing the wall along the edges of the boxes; Boxes equipped with tabs for direct fixing on panels or a metal structure for lightweight and plasterboard walls.
ACCESSORIES SUPPLIED: self-tapping screw kit ø 4x45mm.

USE: the cable puller-feeder allows the wires to be pulled easily. Conformity to standards refers to the protective conduit and not to the cable puller-feeder.
NOTE: for the complete offer of pliable protective conduits, refer to the FK range.