68 Q-MC Range Energy and services distribution pedestals

PROTECTIONS:
GW68901: Board In: 25 A.
Main switch disconnector 4P 32 A;
4 RCBO - MDC Range 2P 230 V 16 A C 6 kA 0.03 A - AC Type for the four 2P+E 16 A 230 V socket-outlets.
GW68902: Board In: 40 A.
Main switch disconnector 4P 63 A;
2 RCBO - MDC Range 2P 230 V 16 A C 6 kA 0.03 A - AC Type for the two 2P+E 16 A 230 V socket-outlets;
2 RCBO - MDC Range 4P 400 V 16 A C characteristic 6 kA 0.03 A - AC Type for the two 3P+N+E 16 A 400 V socket-outlets.
GW68903: Board In: 64 A
Main switch disconnector 4P 80 A;
2 RCBO - MDC Range 2P 230 V 16 A C 6 kA 0.03 A - AC Type for the two 2P+E 16 A 230 V socket-outlets;
2 RCBO - MDC Range 4P 400 V 32 A C characteristic 6 kA 0.03 A - AC Type for the two 3P+N+E 32 A 400 V socket-outlets.
GW68904: Board In: 90 A
2 RCBO MT+BD 4P 400 V 63 A C characteristic 10 kA 0.03 A - AC type for the 2 3P+N+E 63 A 400 V socket-outlets.
CHARACTERISTICS: Head in heat-absorbing thermoplastic material, base in stainless steel with easily removable knock-proof and anti-abrasion protective cover in insulating material.
Power supply terminal block section: GW68901 and GW68902 16 mm², GW68903 and GW68904 35 mm².
ACCESSORIES SUPPLIED: 1 LED lighting lamp 230 V;
GW68901, GW68902 and GW68903: 4 padlockable 1/2" ball valves; GW68904: 2 padlockable 1/2" ball valves.
NOTE: Products will be supplied in the configuration with the new design, as shown in the picture, and with the LED lighting KIT installed as standard, only after having sold out the previous one.

Board In: 25 A.
PROTECTIONS: Main switch disconnector 4P 32 A;
6 RCBO - MDC Range 2P 230 V 16 A C characteristic 6 kA 0.03 A - AC Type for the six 2P+E 16 A 230 V socket-outlets.
CHARACTERISTICS: Head in heat-absorbing thermoplastic material, base in stainless steel with easily removable knock-proof and anti-abrasion protective cover in insulating material.
Power supply terminal block section: 16 mm².
ACCESSORIES SUPPLIED: 1 LED lighting lamp 230 V.
NOTE: Products will be supplied in the configuration with the new design, as shown in the picture, and with the LED lighting KIT installed as standard, only after having sold out the previous one.

CHARACTERISTICS: 18-module enclosure with hinged opening, that can be fitted with security lock, for access to modular devices.
prearrangement for lighting kit 16W 230V and water kit with 2 or 4 padlockable 1/2" water taps, available as accessories.
double-face take-off with cable fastener devices on sides A and B.
Head in heat-absorbing thermoplastic material, base in stainless steel with easily removable knock-proof and anti-abrasion protective cover in insulating material.
ACCESSORIES SUPPLIED: junction box for housing power supply terminal block.

CHARACTERISTICS: accessible from both sides, by tearing off the special door.
Pre-arranged for 1 ordinary lighting lamp or 1 emergency lighting lamp available as accessories.
Head in heat-absorbing thermoplastic material, base in stainless steel with easily removable knock-proof and anti-abrasion protective cover in insulating material.
NOTES: products are supplied without fire-extinguishing equipment. for this reason, the CE mark and the declaration of performances in compliance with regulation EU n. 305/2011 (CPR) are in charge to the final installer of the equipment in the implant.

CHARACTERISTICS: accessible from both sides, by tearing off the special door.
Pre-arranged for 1 ordinary lighting lamp or 1 emergency lighting lamp available as accessories.
Head in heat-absorbing thermoplastic material, base in stainless steel with easily removable knock-proof and anti-abrasion protective cover in insulating material.
NOTES: products are supplied without fire-extinguishing equipment. for this reason, the CE mark and the declaration of performances in compliance with regulation EU n. 305/2011 (CPR) are in charge to the final installer of the equipment in the implant.

PROTECTIONS:
GW68841A/W: Board In: 14 A; 1 RCBO - MDC Range 2P 230 V 16 A C 6 kA 0,03 A - AC Type
GW68842A/W: Board In: 14 A; 1 RCBO - MDC Range 2P 230 V 16 A C 6 kA 0,03 A - AC Type
ACCESSORIES SUPPLIED: 1 LED lighting lamp 230V; nr.2 lockable 1/2" water taps.
CHARACTERISTICS: stainless steel cable fastener devices; enclosure with hinged opening that can be fitted with security lock, for access to modular devices.
GW68841A/W: protection degree IP56.
GW68842A/W: protection degree IP55.
Power supply terminal block section: 16 mm². Pedestal dimensions: 445x625x300 mm (LxHxD).

PROTECTIONS:
GW68846A/W: Board In: 25A; Main RCD 4P 40 A 0.03 A AC Type;
3 MCB - MTC Range 2P 230 V 16 A C 6 kA for the six 2P+E 16 A 230 V non-interlocked socket-outlets
1 MCB - MTC Range 2P 230 V 16 A C 6 kA for the two 2P+E 10/16 A 230 V domestic socket-outlets
GW68847A/W: Board In: 25A; Main RCD 4P 40 A 0.03 A AC Type;
2 MCB - MTC Range 2P 230 V 16 A C 6 kA for the two 2P+E 16 A 230 V interlocked socket-outlets
1 MCB - MTC Range 3P 400 V 16 A C 6 kA for the 3P+E 16 A 400 V interlocked socket-outlet;
1 MCB - MTC Range 2P 230 V 16 A C 6 kA for the two 2P+E 10/16 A 230 V domestic socket-outlets
ACCESSORIES SUPPLIED: plug IEC 309 for supply GW68846 and GW68847 3P+N+E 32A 400V; 5 mt of H 07 RN - F cable for supply;
1 LED lighting lamp 16W 230V.
CHARACTERISTICS: enclosure with hinged opening that can be fitted with security lock, for access to modular devices.
Pedestal dimensions: 445x697x346 mm (LxHxD).
NOTE: products will be supplied with the new version, as shown in the picture and with LED lighiting lamp, only after having sold out the previous one.

PROTECTIONS:
GW68851A/W: Board In: 25 A; Main switch disconnector 4P 32 A;
4 RCBO - MDC Range 2P 230 V 16 A C 6 kA 0.03 A - AC Type for the four 2P+E 16 A 230 V socket-outlets.
GW68852A/W: Board In: 25 A; Main switch disconnector 4P 32 A;
2 RCBO - MDC Range 2P 230 V 16 A C 6 kA 0.03 A - AC Type for the two 2P+E 16 A 230 V socket-outlets;
2 RCBO - MDC Range 2P 230 V 32 A C characteristic 6 kA 0.03 A - AC Type for the two 2P+E 32 A 230 V socket-outlets.
ACCESSORIES SUPPLIED: 1 LED lighting lamp 230 V; 4 padlockable 1/2" ball valves.
CHARACTERISTICS: stainless steel cable fastener devices; enclosure with hinged opening that can be fitted with security lock, for access to modular devices.
Power supply terminal block section: 16 mm². Pedestal dimensions: 445x950x300 mm (LxHxD).
NOTE: Products will be supplied in the configuration with the new design, as shown in the picture, and with the LED lighting KIT installed as standard, only after having sold out the previous one.

PROTECTIONS: Board In: 32A. Main switch 40A 4P.4 RCBO - MDC range 2P 230V 10A C 6kA 0,03A - A type for the 2P+E 230V domestic sockets..CHARACTERISTICS: enclosure with hinged opening that can be fitted with security lock for access to modular devices. Stainless steel cable fastener devices. power supply terminal section:16mm². Pedestal dimensions: 445x950x300 mm (LxHxD).

Board In: 20A
PROTECTIONS: Main switch disconnector 2P 32A;
4 RCBO - MDC Range 2P 230 V 6 A C 6 kA 0,03 A - AC Type for the four 2P+E 16 A 230 V interlocked socket-outlets
CHARACTERISTICS: stainless steel cable fastener devices; enclosure with hinged opening that can be fitted with security lock, for access to modular devices.
Power supply terminal block section: 16 mm². Pre-arrangement for LED lighting lamp 230V; pre-arrangement for nr. 2 or 4 padlockable 1/2" water taps.
Pedestal dimensions: 445x1284x300 mm (LxHxD).

PROTECTIONS:
GW68857A/W: Board In: 32A; Main switch disconnector 2P 40A;
8 RCBO - MDC Range 2P 230 V 6 A C 6 kA 0,03 A - AC Type for the eight 2P+E 16 A 230 V non-interlocked socket-outlets
GW68858A/W: Board In: 25A; Main switch disconnector 2P 32A;
4 RCBO - MDC Range 2P 230 V 6 A C 6 kA 0,03 A - AC Type for the four 2P+E 16 A 230 V non-interlocked socket-outlets
CHARACTERISTICS: stainless steel cable fastener devices;
enclosure with hinged opening that can be fitted with security lock, for access to modular devices.
Power supply terminal block section: 16 mm². Pre-arrangement for LED lighting lamp 230V; pre-arrangement for nr. 2 or 4 lockable spherical 1/2" water taps.
GW68857A/W: protection degree IP56.
GW68858A/W: protection degree IP55.
Pedestal dimensions: 445x1284x300 mm (LxHxD).
NOTE: products will be supplied with the new version, as shown in the picture, only after having sold out the previous one.

PROTECTIONS:
GW68876A/W: Board In: 25 A; Main switch disconnector 4P 32 A;
4 MDC 2P 16 A 0.03 A one-way switches, class AC 6 kA for the 4 2P+E 16 A 230 V socket-outlets.
GW68877A/W: Board In: 25 A; Main switch disconnector 4P 32 A;
3 MDC 2P 16 A 0.03 A one-way switches, class AC 6 kA for the 3 2P+E 16 A 230 V socket-outlets;
1 MDC 4P 16 A 0.03 A one-way switch, class AC 6 kA for the 3P+N+E 16 A 400 V socket-outlet.
GW68878A/W: Board In: 50 A; Main switch disconnector 4P 63 A;
4 MDC 2P 32 A 0.03 A one-way switches, class AC 6 kA for the 4 2P+E 32 A 230 V socket-outlets.
ACCESSORIES SUPPLIED: 1 LED lighting lamp 230 V; 4 padlockable 1/2" ball valves.
CHARACTERISTICS: stainless steel cable fastener devices; enclosure with hinged opening that can be fitted with security lock, for access to modular devices.
Power supply terminal block section: 16 mm²; Pedestal dimensions: 445x1284x300 mm (LxHxD).
NOTES: for technical-commercial information, please contact your local sales representative or SAT (035 946 111).
products will be supplied with the new version, as shown in the picture and with LED lighiting lamp, only after having sold out the previous one.

PROTECTIONS:
GW68874A/W: Board In: 90 A.
2 RCBO MT+BD 4P 400 V 63 A C characteristic 10 kA 0.03 A - AC type for the 2 3P+N+E 63 A 400 V socket-outlets.
GW68875A/W: Board In: 90 A.
1 miniature circuit breaker with earthing residual current relay with separate toroid MTHP 4P 400 V 125 A C characteristic 16 kA for 125 A socket-outlet.
ACCESSORIES SUPPLIED: 1 LED lighting lamp 230 V;
GW68874A/W: 2 padlockable 1/2" ball valves; GW68875A/W: 2 padlockable 1/2" ball valves;
CHARACTERISTICS: stainless steel cable fastener devices; enclosure with hinged opening that can be fitted with security lock, for access to modular devices.
Power supply terminal block section: GW68874A/W 70 mm², GW68875A/W 70 mm²; Pedestal dimensions: 445x1284x300 mm (LxHxD).
NOTES: for technical-commercial information, please contact your local sales representative or SAT (035 946 111).

APPLICATION: The access control can be integrated in the system with 68 Q-MC terminal boards with electronic management in order to allow the access of people in determinated areas, or to anable the use of specific services..
ACCESSORIES SUPPLIED: n. 2 M12 cable gland; screwcaps for double insulation; screws for the sealing of the frontal.

ACCESSORIES SUPPLIED: junction box for housing power supply terminal block.
CHARACTERISTICS: 18-module enclosure with hinged opening, that can be fitted with security lock, for access to modular devices;
prearrangement for lighting kit 230V, available as an accessory.
GW68701A/W: single-face take-off with cable fastener devices only on side A; GW68711A/W: double-face take-off with cable fastener devices on sides A and B;
Pedestal dimensions: 445x625x300 mm (LxHxD).

CHARACTERISTICS: 18-module enclosure with hinged opening, that can be fitted with security lock, for access to modular devices; prearrangement for lighting kit 230V, available as an accessory. Pedestal dimensions: 445x697x346 mm (LxHxD).

ACCESSORIES SUPPLIED: junction box for housing power supply terminal block.
CHARACTERISTICS: 18-module enclosure with hinged opening, that can be fitted with security lock, for access to modular devices; prearrangement for lighting kit 230V and water kit with 2 or 4 padlockable spherical taps of 1/2", available as accessories; double-face take-off with cable fastener devices on sides A and B. Pedestal dimensions: 445x950x300 mm (LxHxD).

ACCESSORIES SUPPLIED: junction box for housing power supply terminal block.
GW68716A/W dual 18-module enclosure with hinged opening, can be equipped with a security lock.
CHARACTERISTICS: 18-module enclosure with hinged opening, that can be fitted with security lock, for access to modular devices; prearrangement for lighting kit 16W 230V and water kit with 2 or 4 padlockable 1/2" water taps, available as accessories; double-face take-off with cable fastener devices on sides A and B. Pedestal dimensions: 445x1284x300 mm (LxHxD).

CHARACTERISTICS: accessible from both sides, by tearing off the special door.
Fitted for 1 ordinary lighting kit or 1 emergency lighting kit, available as accessories.
Pedestal dimensions GW68721A/W: 445x950x300 mm (LxHxD). Pedestal dimensions GW68723A/W: 445x1284x300 mm (LxHxD).
NOTES: products are supplied without fire-extinguishing equipment. for this reason, the CE mark and the declaration of performances in compliance with regulation EU n. 305/2011 (CPR) are in charge to the final installer of the equipment in the implant.

CHARACTERISTICS: accessible from both sides, by tearing off the special door.
Pre-arranged for 1 ordinary lighting lamp or 1 emergency lighting lamp available as accessories.
Pedestal dimensions: 445x950x300 mm (LxHxD).
NOTES: products are supplied without fire-extinguishing equipment. for this reason, the CE mark and the declaration of performances in compliance with regulation EU n. 305/2011 (CPR) are in charge to the final installer of the equipment in the implant.

CHARACTERISTICS: lance type UNI EN 671-2.

NOTES: To be used with terminal boards with electronic management system and with access control GW68998.
for technical-commercial information, please contact your local sales representative or SAT (035 946 111).

NOTES: To be used with terminal boards with electronic management system and with access control GW68998.
for technical-commercial information, please contact your local sales representative or SAT (035 946 111).

NOTES: To be used with terminal boards with electronic management system and with access control GW68998.
for technical-commercial information, please contact your local sales representative or SAT (035 946 111).
The converter RS485/USB can manage up to 250 pedestals for line. In case of more lines is necessary to use more converters GW68994.
For the uso of more lines please verify that the PC has more USB doors availables. Use an Hub for have other USB.

COMPOSITION:
1 USB key for PC;
1 USB-RS485 converter;
1 Sw for management To be used with terminal boards with electronic management system and with access control GW68998.
NOTE: for technical-commercial information, please contact your local sales representative or SAT (035 946 111).
General note for centralised system: For the wiring of the pedestals, in a centralised system, is necessary to use an RS485 Bus cable. The cable must be an armed and twisted with a couple of wires 0.22mm² and 120Ohm impedance of the cable.
Some cables suitable for centralised system: BELDEN P/N 9841, ITC/CDT 14S7Y and CEAM CPR 6003.

ACCESSORIES SUPPLIED: screws for fixing panel.
CHARACTERISTICS: dimensions (LxHhxD): 211x276x17 mm.

ACCESSORIES SUPPLIED: screws for fixing panel.
CHARACTERISTICS: dimensions (LxHhxD): 211x276x17 mm.

ACCESSORIES SUPPLIED: adjustment fittings and nuts for pedestals.

ACCESSORIES SUPPLIED: lamp and supply cable.
CHARACTERISTICS: GW68791 permanent emergency lighting, equipped with double supply circuit, keeps the Ni/C storage batteries charged; autonomy 1h

CHARACTERISTICS: the lighting KIT with LED technology enables electricity savings of up to 66%.
NOTES: due to the continuous changes with the LED technologies, the technical data can undertake variations.

ACCESSORIES SUPPLIED: adjustment fittings and nuts for pedestals.

ACCESSORIES SUPPLIED: 2 keys.
NOTES: all the keys and relative locks with the same product code are identical.

PROTECTIONS:
GW68801A/W: Board In: 25 A; Main switch disconnector 4P 32A;
4 RCBO - MDC Range 2P 230 V 16 A C 6 kA 0,03 A - AC Type for the four 2P+E 16 A 230 V socket-outlets
GW68802A/W: Board In: 40 A; Main switch disconnector 4P 63 A;
2 RCBO - MDC Range 2P 230 V 16 A C 6 kA 0,03 A - AC Type for the two 2P+E 16 A 230 V socket-outlets;
2 RCBO - MDC Range 4P 400 V 16 A C 6 kA 0,03 A - AC Type for the two 3P+N+E 16 A 400 V socket-outlets
ACCESSORIES SUPPLIED: 2 fluorescent lighting lamps 11W 230V;
4 padlockable 1/2" ball valves;
2 supports for flexible conduit GW68762.
CHARACTERISTICS: side A: user socket-outlets, cable guide with cable fastener devices, blank retractable door;
side B: enclosure complete with modular protection equipped with security lock.
Power supply terminal block section: GW68801A/W 16 mm², GW68802A/W 35 mm².
Pedestal dimensions: 600x840x520 mm (LxHxD).
NOTE: products will be supplied with the new version, as shown in the picture, only after having sold out the previous one.

Board In: 50A
PROTECTIONS: Main switch disconnector 4P 63A;
1 RCBO - MDC Range 2P 230 V 16 A C 6 kA 0,03 A - AC Type for the 2P+E 16 A 230 V socket-outlet;
2 RCBO - MDC Range 4P 400 V 25 A C 6 kA 0,03 A - AC Type for the two 3P+N+E 32 A 400 V socket-outlets
ACCESSORIES SUPPLIED: 2 fluorescent lighting lamp 11W 230V; 4 padlockable 1/2" ball valves; 2 supports for flexible conduit GW68762.
CHARACTERISTICS: side A: user socket-outlets, cable guide with cable fastener devices, blank retractable door;
side B: enclosure complete with modular protection equipped with security lock.
Power supply terminal block section: 35 mm².
Pedestal dimensions: 600x840x520 mm (LxHxD).
NOTE: products will be supplied with the new version, as shown in the picture, only after having sold out the previous one.

ACCESSORIES SUPPLIED: 2 supports for flexible conduit GW68762; junction box for housing power supply terminal block.
CHARACTERISTICS: blank retractable doors; 14-module enclosure with transparent door (not supplied). pre-arrangement for lighting kit 11W 230V (2 ordinary and 1 emergency) and water kit with 2 or 4 lockable 1/2" water taps, available as accessories.
Single-sided take-off with cable guide and cable fastener devices only on side A.
Pedestal dimensions: 600x840x520 mm (LxHxD).

CHARACTERISTICS: accessible from both sides, by tearing off the special door.
Pre-arranged for 2 ordinary lighting lamp or 1 emergency lighting lamp available as accessories.
Pedestal dimensions: 600x840x520 mm (LxHxD).
NOTES: products are supplied without fire-extinguishing equipment. for this reason, the CE mark and the declaration of performances in compliance with regulation EU n. 305/2011 (CPR) are in charge to the final installer of the equipment in the implant.

CHARACTERISTICS: lance type UNI EN 671-2.

PROTECTIONS:
GW68831A/W: Board In: 16A; Main switch disconnector 4P 32A;
4 RCBO - MDC Range 2P 230 V 10 A C 6 kA 0,03 A - AC Type for the four 2P+E 16 A 230 V socket-outlets
GW68832A/W: Board In: 16A; Main switch disconnector 4P 32A;
6 RCBO - MDC Range 2P 230 V 10 A C 6 kA 0,03 A - AC Type for the six 2P+E 16 A 230 V socket-outlets
GW68833A/W: Board In: 24A; Main switch disconnector 4P 32A;
8 RCBO - MDC Range 2P 230 V 10 A C 6 kA 0,03 A - AC Type for the eight 2P+E 16 A 230 V socket-outlets
ACCESSORIES SUPPLIED: 2 plexiglass kits for lateral protection.
CHARACTERISTICS: sides A and B: user socket-outlets, enclosure complete with modular protections equipped with security lock, cable guide with cable fastener devices, blank retractable door; pre-arrangement for lighting kit 11W 230V (2 ordinary and 1 emergency) and water kit with 2 or 4 padlockable 1/2" ball valves, available as accessories
Power supply terminal block section: GW68831A/W 16mm²; GW68832A/W, and GW68833A/W 35mm².
Pedestal dimensions: 600x1540x600 mm (LxHxD).
NOTE: products will be supplied with the new version, as shown in the picture, only after having sold out the previous one.

Board In: 200 A.
PROTECTIONS: 1 miniature circuit breaker with earthing residual current relay with separate toroid MTX 4P 400 V 250 A type N 36 kA.
ACCESSORIES SUPPLIED: nr.2 lockable 1/2" water taps; 2 fluorescent lighting lamps 11 W 230 V, 2 supports for flexible conduit GW68762.
CHARACTERISTICS: stainless steel cable fastener devices; board in stainless steel, can be equipped with security lock for access to the modular devices.
Connection to the power supply network and power take-off via two terminal blocks 185 mm² 4P.
NOTES: for technical-commercial information, please contact your local sales representative or SAT (035 946 111).
Pedestal dimensions: 600x1540x600 mm (LxHxD).

Board In: 200 A.
PROTECTIONS: 1 MTX 4 pole 250 A switch type N 36 kA with earthing residual current relay with separate toroid.
ACCESSORIES SUPPLIED: 2 lockable 1/2" water taps; 2 fluorescent lighting lamps 11 W 230 V; 2 supports for flexible conduit GW68762;
CHARACTERISTICS: cable clamp devices in stainless steel, can be equipped with security lock for access to the modular devices.
NOTES: for technical-commercial information, please contact your local sales representative or SAT (035 946 111). Casing dimensions (LxHxD): 600x1540x600 mm.

ACCESSORIES SUPPLIED: 2 plexiglass kits for lateral protection; junction box for housing power supply terminal block.
CHARACTERISTICS: 2 blank retractable doors; 14+14 module enclosure with transparent door (not supplied);
pre-arrangement for lighting kit 11W 230V (2 ordinary and 1 emergency) and water kit with 2 or 4 lockable spherical taps of 1/2", available as accessories
Double-face take-off with cable guide and cable fastener devices on sides A and B.
Pedestal dimensions: 600x1540x600 mm (LxHxD).

CHARACTERISTICS: accessible from both sides, by tearing off the special door.
Pre-arranged for 2 ordinary lighting lamp or 1 emergency lighting lamp available as accessories.
Pedestal dimensions: 600x1540x600 mm (LxHxD).
NOTES: products are supplied without fire-extinguishing equipment. for this reason, the CE mark and the declaration of performances in compliance with regulation EU n. 305/2011 (CPR) are in charge to the final installer of the equipment in the implant.

CHARACTERISTICS: lance type UNI EN 671-2.

NOTES: To be used with terminal boards with electronic management system.
for technical-commercial information, please contact your local sales representative or SAT (035 946 111).

NOTES: To be used with terminal boards with electronic management system and with access control GW68998.
for technical-commercial information, please contact your local sales representative or SAT (035 946 111).

NOTES: To be used with terminal boards with electronic management system and with access control GW68998.
for technical-commercial information, please contact your local sales representative or SAT (035 946 111).
The converter RS485/USB can manage up to 250 pedestals for line. In case of more lines is necessary to use more converters GW68994.
For the uso of more lines please verify that the PC has more USB doors availables. Use an Hub for have other USB.

COMPOSITION:
1 USB key for PC;
1 USB-RS485 converter;
1 Sw for management.
NOTES: To be used with terminal boards with electronic management system and with access control GW68998.
For technical-commercial information, please contact your local sales representative or SAT.
General note for centralised system: For the wiring of the pedestals, in a centralised system, is necessary to use an RS485 Bus cable.
The cable must be an armed and twisted with a couple of wires 0.22mm² and 120Ohm impedance of the cable.
Some cables suitable for centralised system: BELDEN P/N 9841, ITC/CDT 14S7Y and CEAM CPR 6003.

ACCESSORIES SUPPLIED: fixing screws.
CHARACTERISTICS: dimensions LxHxD: 328x285x21, GW68736W: 328x285x110 mm.
NOTES: GW68736W compatible only with standard, 125B type terminals.

ACCESSORIES SUPPLIED: fixing screws.
CHARACTERISTICS: dimensions LxHxD: 328x285x43mm.

ACCESSORIES SUPPLIED: 14-module rail EN 50022, panel fixing screws.
CHARACTERISTICS: dimensions LxHxD: 328x285x43mm; transparent door that can be equipped with security lock GW68758.

CHARACTERISTICS: the socket-outlets are equipped with a NO contact (mechanically activated by the plug pilot) to allow the creation of the electric interlock circuit. nickel-plated contacts.
NOTES: Products will be supplied with the new version, as shown in the picture, only after having sold out the previous one.

CHARACTERISTICS: They permit making supply systems with terminals in series, with the enter-exit type of connection, for power cables up to 185 mm².
All codes include a 6 mm² 2P+E terminal block for the lighting circuit supply.

ACCESSORIES SUPPLIED: adjustment fittings and nuts for pedestals.
CHARACTERISTICS: GW68764 with 2 meters of diameter 70mm, capacity 1.5m³/h.

ACCESSORIES SUPPLIED: protection grille, fixing screws, lamp and supply cable.
CHARACTERISTICS: GW68752 permanent emergency lighting kit, equipped with double supply circuit for switching the lamp on and off keeps the Ni/Cd storage batteries charged.

ACCESSORIES SUPPLIED: adjustment fittings and nuts for pedestals.

ACCESSORIES SUPPLIED: check nuts and non-skid washer.
CHARACTERISTICS: fastening to the terminal is achieved using the threaded pins M8 soldered to the plate.

CHARACTERISTICS: all keys have a standardised code; can be mounted on the blank doors of the terminals and on the door of the enclosure panels.

ACCESSORIES SUPPLIED: fixing screws.