The connected system, based on the Zigbee wireless protocol, offers a full range of solutions for smart homes and small offices that are suitable for both new buildings and renovations.
It enables you to control safety, comfort and consumption, through a unique user experience, using the Home Gateway APP and EGO Smart plates. The system integrates with the Google Home IoT platforms, Amazon Alexa and IFTTT, and all functions can be controlled with Google and Alexa voice assistants.
CHARACTERISTICS: multiprotocol gateway provided with ZigBee, Wi-Fi and Bluetooth (BLE) interfaces. APPLICATIONS: the device enables the configuration, supervision, command and control of the smart home installation via the cloud. Management of functions and access to the system’s data is done through a cloud platform, via a dedicated app (smartphone and tablet). System configuration is carried out through this device using the same app. NOTES: an Internet connection is required in the system. The Bluetooth connection is only used when configuring devices.
FEATURES: devices for controlling 1 On/Off load through a live output contact, with indicative measurement of the power and energy consumed (measurements also transmitted on Zigbee). Suitable for control of incandescent and halogen lamps (240Vac): 4-500W, LED lamps (240Vac): 4-100W, fluorescent lamps (240Vac): 4-120W, halogen lamps powered by electronic transformers (240Vac): 4-250VA. Local push button with axial activation for control of the lamps connected to the device.
Equipped with 2 inputs (auxiliary axial controls, traditional push-buttons and switches, sensors, etc.) to replicate the local control of the lamp or send Zigbee commands and statuses.
The devices are equipped with a blue LED that can be configured to facilitate localisation at night or to signal the local load status and are designed to power the EGO SMART plate within which they are housed. APPLICATIONS: On/off and timed control of the lamp connected to the devices using the local push-button. The lamp can also be controlled via Zigbee from other devices connected to the network (control unit, scenarios). The inputs can be used to add control points for the local lamp connected to the device, Zigbee commands to other actuators (on/off control and lamp dimming, roller-shutter and Venetian blind control, generic load command, scenarios) or to send sensor statuses over the ZigBee network.
When these devices are used in conjunction with the EGO SMART Plate, an additional Zigbee command can be sent, activated by the push-button on the device when “SHIFT” is enabled from the SMART Plate. NOTES: The devices must be completed with a front button key: GWA1201 with the GW1x551S or GW1x555S button keys; GWA1202 with the GW1x552S or GW1x556S button keys.
FEATURES: devices for the control of 1 dimmable lighting device. Suitable for incandescent, halogen, LED and fluorescent lamps (240Vac): 4-150W, halogen lamps powered by electronic transformers (240Vac): 4-150VA. Trailing edge load driver mode.
Two axial-operated local buttons for dimming the lamp connected to the device.
Equipped with 2 inputs (auxiliary axial controls, traditional push-buttons and switches, sensors, etc.) to replicate the local control of the lamp or to send Zigbee commands and statuses.
The devices are equipped with two blue LEDs that can be configured to facilitate localisation at night or to display the local load status. APPLICATIONS: Control of the dimmable lamp connected to the devices via local push-buttons. The lamp can also be controlled via Zigbee by other devices connected to the network (control unit, scenarios). The inputs can be used to add control points for the local lamp connected to the device, Zigbee commands to other actuators (on/off control and lamp dimming, roller-shutter and Venetian blind control, generic load command, scenarios) or to send sensor statuses over the Zigbee network.
Use of these devices in conjunction with the EGO SMART plate enables 2 additional Zigbee commands to be sent. These can be activated with the push-buttons on the device when the “SHIFT” feature is enabled from the SMART plate. NOTES: The devices must be completed with a front button key: GWA1221 must be completed with the GW1x553S or GW1x557S button keys; GWA1222 must be completed with the GW1x554S or GW1x558S button keys.
CHARACTERISTICS: devices for controlling a motor for roller shutters, curtains, venetian blinds, roller blinds, etc., via 2 interlocked output contacts. Two local push buttons with axial activation enable operation of the motor connected to the device.
Equipped with 2 inputs (auxiliary axial commands, traditional switches and push buttons, sensors etc.) to replicate local control of the motor or for sending ZigBee commands and status.
The devices are equipped with two blue LEDs that can be configured to facilitate localisation at night or to indicate the motor operation in progress and are designed to supply power to the EGO SMART plate within which they are housed. APPLICATIONS: control of 1 motor connected to the device via local push buttons. The motor can also be controlled via ZigBee by other devices connected to the network (up/down commands, scenarios). Using the inputs, it is possible to add local motor-control points connected to the device, ZigBee commands to other actuators (on/off and lamp dimming control, roller shutter and venetian blind control, generic load control, scenarios) or send sensor status over the ZigBee network.
Using this device in combination with the EGO SMART plate, 2 further ZigBee commands can be sent, activated via the push buttons on the device when the SMART plate has the "SHIFT" function enabled. NOTES: the devices must be completed with a front push button: GWA1231 must be completed with push buttons GW1x553S or GW1x557S; GWA1232 must be completed with push buttons GW1x554S or GW1x558S.
CHARACTERISTICS: devices for the sending of 2 independent ZigBee commands via the operation of 2 local push buttons with axial activation.
Equipped with 2 inputs (auxiliary axial commads, traditional switches and push buttons, sensors etc.) for sending ZigBee commands and status.
The devices are equipped with two blue LEDs that can be configured to facilitate localisation at night or to display the status of the loads with on/off type controls and are designed to supply power to the EGO SMART plate within which they are housed. APPLICATIONS: sending of 2 ZigBee commands (On/off and lamp dimming commands, roller shutter command, generic load command, scenarios). Using the inputs, it is possible to add ZigBee commands to other actuators (lamp on/off and dimming control, roller shutter and Venetian blind control, generic load control, scenarios) or send sensor status over the ZigBee network.
Using this device in combination with the EGO SMART plate, 2 further ZigBee commands can be sent, activated via the push buttons on the device when the SMART plate has the "SHIFT" function enabled. NOTES: the devices must be completed with a front push button: GWA1241 must be completed with push buttons GW1x553S or GW1x557S; GWA1242 must be completed with push buttons GW1x554S or GW1x558S.
CHARACTERISTICS: auxiliary commands to use in combination with ZigBee connected axial commands or to EVO axial commands.
The devices are equipped with a blue LED that can be configured to facilitate localisation at night or to display the status of the load. APPLICATIONS: connected to the local inputs of the connected axial commands, they enable the replication of local load control or the sending of ZigBee commands; connected to the local inputs of the EVO axial commands, they enable the replication of local load control or the management of centralised controls. NOTES: the devices must be completed with a front push button: GW10677 must be completed with push buttons GW1x551S or GW1x555S; GW10678 must be completed with push buttons GW1x552S or GW1x556S.
CHARACTERISTICS: auxiliary commands to be used in combination with ZigBee connected axial commands or to EVO axial commands.
The devices are equipped with two blue LEDs that can be configured to facilitate localisation at night or to display the status of the load. APPLICATIONS: connected to the local inputs of the connected axial commands, they enable the replication of local load control or the sending of ZigBee commands; connected to the local inputs of the EVO axial commands, they enable the replication of local load control or the management of centralised controls. NOTES: the devices must be completed with a front push button: GWA10679 must be completed with push buttons GW1x553S or GW1x557S; GWA10680 must be completed with push buttons GW1x554S or GW1x558S.
Interchangeable button keys and lenses for axial command modules
Interchangeable button keys for axial command modules
CHARACTERISTICS: device for sending 4 independent Zigbee commands via activation by the local 4 push buttons.
The device can be installed both flush (ChoruSmart supports) and surface mounted. For surface mounted installation, it can be completed with ONE, GEO, LUX, ICE and EGO plates in both the 2-gang rectangular version and the international 2-gang version.
The device does not require power (neither from the mains nor from batteries). APPLICATIONS: sending 4 Zigbee commands (on/off command and lamp dimming, roller-shutter control, generic load command, scenarios) using local buttons. NOTES: The push-button panel must be completed with front buttons: with 2 push button keys GW1x819 of 1 module or 1 push button key GW1x820 of 2 modules.
The device cannot be used to control actuators: GWA1521, GWA1522, GWA1523, GWA1526, GWA1531 and the local relay of GWA1916. ACCESSORIES SUPPLIED: base and fitting KIT (screws, wall-plugs and bi-adhesive strips) for surface mounting, adapter for flush mounting on ChoruSmart supports.
CHARACTERISTICS: interface for the connection of 2 independent input contacts (auxiliary axial commands, push buttons and traditional switches sensors etc.), potential-free (GWA1501) or live (GWA1502). GWA1501 powered by CR2032-type battery (replaceable). APPLICATIONS: allows commands to be sent for ON-OFF, timed, roller shutters and Venetian blinds, dimmers, scenarios, priority commands and signalling the current state of the contact. NOTES: installation in flush-mounting boxes, junction boxes or clipped into the ChoruSmart GW1x750 blanking modules.
FEATURES: presence sensor with detection based on the set brightness threshold. Fixed lens. Parameters that can be set during configuration via the APP: brightness threshold value, shutdown time after presence detection.
Local live contact for direct control of the load, connectable loads: incandescent and halogen lamps (240Vac): 500W, LED lamps (240Vac): 100W, fluorescent lamps (240Vac): 120W, halogen lamps powered by electronic transformers (240Vac): 250VA.
Equipped with 2 inputs (auxiliary axial controls, traditional push-buttons and switches, sensors, etc.) to replicate the direct control of the lamp/load connected to the local relay or to send Zigbee commands and statuses.
The device has a blue LED to indicate motion detection (regardless of the brightness threshold). APPLICATIONS: the devices detect a person's movement and send the signal via Zigbee which activates lamps and/or loads. The connected lamp and/or load can be activated directly through the local contact. Energy savings: light control of the environments or areas concerned only when there is traffic/presence of people. NOTES: do not install the product in watertight plates: the lid membrane does not allow the detector lens to function correctly.
FEATURES: motion sensor with horizontal detection angle: ±45° and vertical detection angle: ±45°. Includes a brightness sensor and a temperature sensor. CR123 (replaceable) type battery power supply. NOTES: Wall or shelf installation via included accessories.
For the control of actuations, use the sensor in combination with the connected Zigbee actuators GW1x826, GWA1201 or GWA1202, GWA1221 or GWA1222 (max 5 sensors per actuator) or with the connected Zigbee actuators GWA1526, GWA1521, GWA1522, GWA1523 (max 1 sensor per actuator). The Zigbee-connected actuators GW1x826, GWA1201, GWA1202, GWA1221, GWA1222 can only be controlled in combination with the “Home Gateway” GW1x840.
FEATURES: the sensor detects the opening and closing of doors and windows and includes a temperature sensor. Powered with 2 AAA type batteries (replaceable). NOTES: Installation on doors or windows.
Use the sensor in combination with the connected Zigbee actuators GW1x826, GWA1201 or GWA1202 (max 5 sensors per actuator) or with the ZigBee actuators GWA1521, GWA1522, GWA1523 (max 1 sensor per actuator). The Zigbee-connected actuators GW1x826, GWA1201, GWA1202 can only be controlled in combination with the “Home Gateway” GW1x840.
FEATURES: the sensor detects the presence of smoke and includes a temperature sensor. Power supplied by a CR123 type (replaceable) battery. NOTES: wall or ceiling installation.
To operate a solenoid valve, use the sensor in combination with the connected Zigbee actuators GW1x826, GWA1201 or GWA1202 (max 5 sensors per actuator if the actuator is configured for automatic solenoid reset; unlimited sensors for manual reset) or with Zigbee actuators GWA1521, GWA1522, GWA1523 (max 1 sensor per actuator if the actuator is configured for automatic solenoid reset; unlimited sensors for manual reset). The Zigbee-connected actuators GW1x826, GWA1201, GWA1202 can only be commanded in conjunction with the “Home Gateway” GW1x840.
FEATURES: the sensor detects the presence of water and includes a temperature sensor. CR123 (replaceable) type battery power supply. NOTES: floor installation or alternative wall mounted option using the accessory GWA1541.
To activate a solenoid valve, use the sensor in combination with the connected Zigbee actuators GW1x826, GWA1201 or GWA1202 (max 5 sensors per actuator if actuator is configured for automatic solenoid reset; unlimited sensors for manual reset) or with Zigbee actuators GWA1521, GWA1522, GWA1523 (max 1 sensor per actuator if actuator is configured for automatic solenoid reset; unlimited sensors for manual reset). Zigbee connected actuators GW1x826, GWA1201, GWA1202 can only be controlled in conjunction with the GW1x840 Home Gateway.
FEATURES: 1-channel actuator for controlling loads with a live NO output contact and measurement of the power absorbed and the energy consumed (both measurements transmitted via Zigbee). Local push-button and blue LED for control and display of load status.
Controllable Loads: incandescent and halogen lamps (240Vac): 1920W, LED lamps (240Vac): 200W, fluorescent lamps (240Vac): 200W, halogen lamps powered by electronic transformers (240Vac): 500VA.
Equipped with 1 input (auxiliary axial controls, traditional push-buttons and switches, sensors, etc.) to replicate the local control of the load or to send Zigbee commands and statuses.
The devices are designed to supply power to the EGO SMART plate within which they are housed. APPLICATIONS: On/off and timed control of the load connected to the devices by local push-button. The load can also be controlled via Zigbee from other devices connected to the network (control unit, scenarios). The input can be used to add control points for the connected local load to the devices, send ZigBee commands to other actuators (on/off command and lamp dimming, roller-shutter and Venetian blind control, control of generic loads, scenarios) or send sensor statuses over the ZigBee network.
Automatic load disconnection: the devices can be configured to disconnect the local load when a defined (power) consumption threshold is exceeded during configuration.
Using this device in combination with the EGO SMART plate, 1 further ZigBee command can be sent, activated via the push button on the device when the SMART plate has the “SHIFT” function enabled.
CHARACTERISTICS: 1-channel actuator for the activation of loads through a potential-free output contact (NO). Suitable for controlling incandescent lamps (230 V ac): 2300 W, loads driven by toroidal transformers: 450 W, loads driven by electronic transformers: 600 W, fluorescent lamps: (230 V ac): 150 W, motors: 500 W. Equipped with 1 input for local control of the output. APPLICATIONS: ON-OFF control, timed commands, priority commands and scenario management. If used in combination with the ZigBee GWA1514 water sensor, the installation of a push button (NO) is required for the manual opening of the solenoid valve. NOTES: installation in flush-mounting boxes, junction boxes or clipped into the ChoruSmart GW1x750 blanking modules.
CHARACTERISTICS: 2-channel actuator for the activation of loads through a 230 V output contact (NO). Suitable for controlling incandescent lamps (230 V ac): 1400 W, loads driven by toroidal transformers: 450 W, loads driven by electronic transformers: 600 W, fluorescent lamps: 150 W, LED lamps (230 V ac): 150 W, motors: 500 W. Equipped with 2 inputs for local control of the outputs. APPLICATIONS: ON-OFF control, timed commands, priority commands and management of scenarios. NOTES: installation in flush-mounting boxes, junction boxes or clipped into the ChoruSmart GW1x750 blanking modules.
Connected actuators for generic loads with power measurement
1-channel connected actuator with power meter - ZigBee
CHARACTERISTICS: 1-channel actuator for the activation of loads through a 230 V output contact (NO) and measurement of instantaneous power. Suitable for controlling incandescent lamps (230 V ac): 2300 W, loads driven by toroidal transformers: 450 W, loads driven by electronic transformers: 600 W, fluorescent lamps: (230 V ac): 150 W, motors: 500 W. Equipped with 1 input for local control of the output. APPLICATIONS: ON-OFF control, timed commands, priority commands and management of scenarios and measurement of instantaneous power. NOTES: installation in flush-mounting boxes, junction boxes or clipped into the ChoruSmart GW1x750 blanking modules.
Connected actuators for roller shutters
1-channel connected actuator for roller shutters - ZigBee
CHARACTERISTICS: 1-channel actuator for the activation of a motor to operate roller shutters, curtains, Venetian blinds, roller blinds etc. via 2 interlocked output contacts 230 V ac. Suitable for the control of motors: 500 W. Equipped with 2 inputs for local control of the outputs. APPLICATIONS: controlling operation/adjustment/stop, priority commands, scenario management and alarm signalling. NOTES: installation in flush-mounting boxes, junction boxes or clipped into the ChoruSmart GW1x750 blanking modules.
SMART PLUG
Connected Smart Plug
Connected Smart Plug 230 V AC - German standard - ZigBee
CHARACTERISTICS: adaptor with socket, side earthing and safety shields. It detects power consumed by the connected loads and sends the data on the ZigBee network.
FEATURES: measurement: single phase voltage 100-240Vac 50/60 Hz, maximum current 70A min 0.05A. The device measures the power absorbed and the energy consumed (transmitting the measurements via Zigbee), and implements the load control function (max 10 controllable loads) according to EN 61010-1, EN 61010-2-030. A.T. provided in the package. APPLICATIONS: measurement and monitoring of electrical consumption (power and energy consumed) of a housing unit or area within a building. Load Control Function: automatically disconnects electrical loads to prevent the electrical meter from tripping when the contractual KW limit is exceeded, thus preventing disruption to the user; the load disconnection and connection sequence can be set during configuration via the APP, by priority or by absorption; The loads to be controlled must be controlled by Zigbee-connected actuators: GW1x826, GWA1201, GWA1202, GWA1221, GWA1222, GWA1523, GWA1526, GWA1521 or GWA1522. NOTES: The module can be installed in flush-mounted boxes, junction boxes or enclosures. It can aso be installed on ChoruSmart supports using ChoruSmart blanking module GW1x750, it can be mounted on a DIN rail using DIN rail support GW16841 + ChoruSmart GW1x750 blanking module.
APPLICATION: The P-Comfort relay can be installed in electrical systems limited to a maximum power load of 6 kW. In the event of overload due to the simultaneous switching-on of multiple electrical loads, P-Comfort prevents the interruption of electrical power by disconnecting non-preferred loads controlled by ZigBee-connected actuators: GW1x826, GWA1201, GWA1202, GWA1221, GWA1222, GWA1523, GWA1526, GWA1521 or GWA1522, or wired to the relay contact on the device (maximum 10 devices total). The disconnection and reconnection sequence for non-preferred loads can be set by Priority (regardless of load absorption) or by Power (depending on the power absorbed). NOTES: The Zigbee-connected actuators GW1x826, GWA1201, GWA1202, GWA1221, GWA1222 can only be controlled in combination with the “Home Gateway” GW1x840.
FEATURES: flush-mounted thermostat for the control of heating/cooling systems with manual temperature management and possibility of shutdown. Control algorithms for two-way systems: two points (ON/OFF), proportional-integral (PWM). The thermostat can control a solenoid valve for heating or cooling through a local contact or via Zigbee, in which case the solenoid valve must be controlled by a Zigbee actuator. GWA1521, GWA1522, GWA1523, GW1x826, GWA1201, and GWA1202 Zigbee connected actuators can be used.
The thermostat is equipped with integrated temperature and humidity sensors. The thermostat has an input for a NTC sensor (GW10800 and GW1x900 sensors can be used) for external temperature measurement (e.g., for compensation of temperatures measured locally by the thermostat or for protection in case of underfloor heating/cooling). APPLICATIONS: climate control (heating or cooling) of a housing unit or area; option to manage a daily or weekly heating/cooling profile via the APP. The device measures humidity, if a threshold (defined during configuration) is exceeded, Zigbee can activate a dehumidification system and display/notify the measurement on the APP.
Use in traditional unconnected systems: the connected thermostat can also be used in traditional unconnected installations. In this case, configuration is not carried out via the APP and the NTC sensor input can only be used to compensate for the temperature measurement detected locally by the thermostat.
Accessories
Blanking modules
Blanking modules for housing ZigBee contacts interfaces and actuators
CHARACTERISTICS: 1-module blanking module with pad-printing. Enables the housing and rapid identification of the recessed connected control devices, of the recessed connected actuators and the connected energy meter with load control. NOTES: snap-in assembly.
FEATURES: matt finish. The plate has a dot-matrix display on the upper portion, RGB LED strips (along the outer and inner edges at the top and bottom) and a proximity sensor. APPLICATIONS: visualisation of dynamic icons on the display indicating the functions associated with the devices installed in the plate; event/alarm signalling using the display (messages) and/or RGB led strips. NOTES: The plate must be supplied with power by one of the following connected devices, which must be installed within the same box as the plate: GWA1201, GWA1202, GWA1231, GWA1232, GWA1241, GWA1242 or GW1x826, or by a dedicated GWA1700 power supply; The connection cable from the plate to the device powering it is included in the plate package.
FEATURES: matt finish. The plate has a dot-matrix display on the upper portion, RGB LED strips (along the outer and inner edges at the top and bottom) and a proximity sensor. APPLICATIONS: visualisation of dynamic icons on the display indicating the functions associated with the devices installed in the plate; event/alarm signalling using the display (messages) and/or RGB led strips. NOTES: the plate must be supplied with power by one of the following Smart devices, which must be installed in the same plate box: GWA1201, GWA1202, GWA1231, GWA1232, GWA1241, GWA1242 or GW1x826, or by a dedicated GWA1700 power supply; the connection cable from the plate to the device powering it is included in the plate package.
Codes not held as stock, for delivery times contact your local representative.
FEATURES: matt finish. The plate has a dot-matrix display on the upper portion, RGB LED strips (along the outer and inner edges at the top and bottom) and a proximity sensor. APPLICATIONS: visualisation of dynamic icons on the display indicating the functions associated with the devices installed in the plate; event/alarm signalling using the display (messages) and/or RGB led strips. NOTES: The plate must be supplied with power by one of the following connected devices, which must be installed within the same box as the plate: GWA1201, GWA1202, GWA1231, GWA1232, GWA1241, GWA1242 or GW1x826, or by a dedicated GWA1700 power supply; The connection cable from the plate to the device powering it is included in the plate package.
FEATURES: matt finish. The plate has a dot-matrix display on the upper portion, RGB LED strips (along the outer and inner edges at the top and bottom) and a proximity sensor. APPLICATIONS: visualisation of dynamic icons on the display indicating the functions associated with the devices installed in the plate; event/alarm signalling using the display (messages) and/or RGB led strips. NOTES: the plate must be supplied with power by one of the following Smart devices, which must be installed in the same box as the plate: GWA1201, GWA1202, GWA1231, GWA1232, GWA1241, GWA1242 or GW1x826, or by a dedicated GWA1700 power supply; The connection cable from the plate to the device powering it is included in the plate package.
Codes not held as stock, for delivery times contact your local representative.
FEATURES: matt finish. The plate has a dot-matrix display on the upper portion, RGB LED strips (along the outer and inner edges at the top and bottom) and a proximity sensor. APPLICATIONS: visualisation of dynamic icons on the display indicating the functions associated with the devices installed in the plate; event/alarm signalling using the display (messages) and/or RGB led strips. NOTES: The plate must be supplied with power by one of the following connected devices, which must be installed within the same box as the plate: GWA1201, GWA1202, GWA1231, GWA1232, GWA1241, GWA1242 or GW1x826, or by a dedicated GWA1700 power supply; The connection cable from the plate to the device powering it is included in the plate package.
FEATURES: matt finish, metallic effect. The plate has a dot-matrix display on the upper portion, RGB LED strips (along the outer and inner edges at the top and bottom) and a proximity sensor. APPLICATIONS: visualisation of dynamic icons on the display indicating the functions associated with the devices installed in the plate; event/alarm signalling using the display (messages) and/or RGB led strips. NOTES: the plate must be powered by one of the following connected devices, which must be installed in the same box as the plate: GWA1201, GWA1202, GWA1231, GWA1232, GWA1241, GWA1242 or GW1x826, or by a dedicated GWA1700 power supply; The connection cable from the plate to the device powering it is included in the plate package.
FEATURES: matt finish, metallic effect. The plate has a dot-matrix display on the upper portion, RGB LED strips (along the outer and inner edges at the top and bottom) and a proximity sensor. APPLICATIONS: visualisation of dynamic icons on the display indicating the functions associated with the devices installed in the plate; event/alarm signalling using the display (messages) and/or RGB led strips. NOTES: the plate must be powered by one of the following connected devices, which must be installed in the same box as the plate: GWA1201, GWA1202, GWA1231, GWA1232, GWA1241, GWA1242 or GW1x826, or by a dedicated GWA1700 power supply; The connection cable from the plate to the device powering it is included in the plate package.
FEATURES: matt finish, metallic effect. The plate has a dot-matrix display on the upper portion, RGB LED strips (along the outer and inner edges at the top and bottom) and a proximity sensor. APPLICATIONS: visualisation of dynamic icons on the display indicating the functions associated with the devices installed in the plate; event/alarm signalling using the display (messages) and/or RGB led strips. NOTES: the plate must be supplied with power by one of the following Smart devices, which must be installed in the same box as the plate: GWA1201, GWA1202, GWA1231, GWA1232, GWA1241, GWA1242 or GW1x826, or by a dedicated GWA1700 power supply. The connection cable from the plate to the device powering it is included in the plate package.
Codes not held as stock, for delivery times contact your local representative.
FEATURES: matt finish, metallic effect. The plate has a dot-matrix display on the upper portion, RGB LED strips (along the outer and inner edges at the top and bottom) and a proximity sensor. APPLICATIONS: visualisation of dynamic icons on the display indicating the functions associated with the devices installed in the plate; event/alarm signalling using the display (messages) and/or RGB led strips. NOTES: the plate must be supplied with power by one of the following Smart devices, which must be installed in the same box as the plate: GWA1201, GWA1202, GWA1231, GWA1232, GWA1241, GWA1242 or GW1x826, or by a dedicated GWA1700 power supply; the connection cable from the plate to the device powering it is included in the plate package.
Codes not held as stock, for delivery times contact your local representative.
FEATURES: matt finish, metallic effect. The plate has a dot-matrix display on the upper portion, RGB LED strips (along the outer and inner edges at the top and bottom) and a proximity sensor. APPLICATIONS: visualisation of dynamic icons on the display indicating the functions associated with the devices installed in the plate; event/alarm signalling using the display (messages) and/or RGB led strips. NOTES: the plate must be supplied with power by one of the following Smart devices, which must be installed in the same box as the plate: GWA1201, GWA1202, GWA1231, GWA1232, GWA1241, GWA1242 or GW1x826, or by a dedicated GWA1700 power supply; the connection cable from the plate to the device powering it is included in the plate package.
Codes not held as stock, for delivery times contact your local representative.
FEATURES: matt finish, metallic effect. The plate has a dot-matrix display on the upper portion, RGB LED strips (along the outer and inner edges at the top and bottom) and a proximity sensor. APPLICATIONS: visualisation of dynamic icons on the display indicating the functions associated with the devices installed in the plate; event/alarm signalling using the display (messages) and/or RGB led strips. NOTES: the plate must be supplied with power by one of the following Smart devices, which must be installed in the same box as the plate: GWA1201, GWA1202, GWA1231, GWA1232, GWA1241, GWA1242 or GW1x826, or by a dedicated GWA1700 power supply; the connection cable from the plate to the device powering it is included in the plate package.
Codes not held as stock, for delivery times contact your local representative.
FEATURES: matt finish, metallic effect. The plate has a dot-matrix display on the upper portion, RGB LED strips (along the outer and inner edges at the top and bottom) and a proximity sensor. APPLICATIONS: visualisation of dynamic icons on the display indicating the functions associated with the devices installed in the plate; event/alarm signalling using the display (messages) and/or RGB led strips. NOTES: the plate must be supplied with power by one of the following Smart devices, which must be installed in the same box as the plate: GWA1201, GWA1202, GWA1231, GWA1232, GWA1241, GWA1242 or GW1x826, or by a dedicated GWA1700 power supply; the connection cable from the plate to the device powering it is included in the plate package.
Codes not held as stock, for delivery times contact your local representative.
FEATURES: matt finish. The plate has a dot-matrix display on the upper portion, RGB LED strips (along the outer and inner edges at the top and bottom) and a proximity sensor. APPLICATIONS: visualisation of dynamic icons on the display indicating the functions associated with the devices installed in the plate; event/alarm signalling using the display (messages) and/or RGB led strips. NOTES: The plate must be supplied with power by one of the following connected devices, which must be installed within the same box as the plate: GWA1201, GWA1202, GWA1231, GWA1232, GWA1241, GWA1242 or GW1x826, or by a dedicated GWA1700 power supply; The connection cable from the plate to the device powering it is included in the plate package.
FEATURES: matt finish. The plate has a dot-matrix display on the upper portion, RGB LED strips (along the outer and inner edges at the top and bottom) and a proximity sensor. APPLICATIONS: visualisation of dynamic icons on the display indicating the functions associated with the devices installed in the plate; event/alarm signalling using the display (messages) and/or RGB led strips. NOTES: the plate must be supplied with power by one of the following connected devices, which must be installed in the same box as the plate: GWA1201, GWA1202, GWA1231, GWA1232, GWA1241, GWA1242 or GW1x826, or by a dedicated GWA1700 power supply; The connection cable from the plate to the device powering it is included in the plate package.
Codes not held as stock, for delivery times contact your local representative.
FEATURES: matt finish. The plate has a dot-matrix display on the upper portion, RGB LED strips (along the outer and inner edges at the top and bottom) and a proximity sensor. APPLICATIONS: visualisation of dynamic icons on the display indicating the functions associated with the devices installed in the plate; event/alarm signalling using the display (messages) and/or RGB led strips. NOTES: The plate must be supplied with power by one of the following connected devices, which must be installed within the same box as the plate: GWA1201, GWA1202, GWA1231, GWA1232, GWA1241, GWA1242 or GW1x826, or by a dedicated GWA1700 power supply; The connection cable from the plate to the device powering it is included in the plate package.
FEATURES: matt finish. The plate has a dot-matrix display on the upper portion, RGB LED strips (along the outer and inner edges at the top and bottom) and a proximity sensor. APPLICATIONS: visualisation of dynamic icons on the display indicating the functions associated with the devices installed in the plate; event/alarm signalling using the display (messages) and/or RGB led strips. NOTES: the plate must be supplied with power by one of the following connected devices, which must be installed in the same box as the plate: GWA1201, GWA1202, GWA1231, GWA1232, GWA1241, GWA1242 or GW1x826, or by a dedicated GWA1700 power supply; The connection cable from the plate to the device powering it is included in the plate package.
Codes not held as stock, for delivery times contact your local representative.
FEATURES: matt finish. The plate has a dot-matrix display on the upper portion, RGB LED strips (along the outer and inner edges at the top and bottom) and a proximity sensor. APPLICATIONS: visualisation of dynamic icons on the display indicating the functions associated with the devices installed in the plate; event/alarm signalling using the display (messages) and/or RGB led strips. NOTES: The plate must be supplied with power by one of the following connected devices, which must be installed within the same box as the plate: GWA1201, GWA1202, GWA1231, GWA1232, GWA1241, GWA1242 or GW1x826, or by a dedicated GWA1700 power supply; The connection cable from the plate to the device powering it is included in the plate package.
FEATURES: matt finish, metallic effect. The plate has a dot-matrix display on the upper portion, RGB LED strips (along the outer and inner edges at the top and bottom) and a proximity sensor. APPLICATIONS: visualisation of dynamic icons on the display indicating the functions associated with the devices installed in the plate; event/alarm signalling using the display (messages) and/or RGB led strips. NOTES: the plate must be powered by one of the following connected devices, which must be installed in the same box as the plate: GWA1201, GWA1202, GWA1231, GWA1232, GWA1241, GWA1242 or GW1x826, or by a dedicated GWA1700 power supply; The connection cable from the plate to the device powering it is included in the plate package.
FEATURES: matt finish, metallic effect. The plate has a dot-matrix display on the upper portion, RGB LED strips (along the outer and inner edges at the top and bottom) and a proximity sensor. APPLICATIONS: visualisation of dynamic icons on the display indicating the functions associated with the devices installed in the plate; event/alarm signalling using the display (messages) and/or RGB led strips. NOTES: the plate must be powered by one of the following connected devices, which must be installed in the same box as the plate: GWA1201, GWA1202, GWA1231, GWA1232, GWA1241, GWA1242 or GW1x826, or by a dedicated GWA1700 power supply; The connection cable from the plate to the device powering it is included in the plate package.
FEATURES: matt finish, metallic effect. The plate has a dot-matrix display on the upper portion, RGB LED strips (along the outer and inner edges at the top and bottom) and a proximity sensor. APPLICATIONS: visualisation of dynamic icons on the display indicating the functions associated with the devices installed in the plate; event/alarm signalling using the display (messages) and/or RGB led strips. NOTES: The plate must be supplied with power by one of the following connected devices, which must be installed in the same box as the plate: GWA1201, GWA1202, GWA1231, GWA1232, GWA1241, GWA1242 or GW1x826, or by a dedicated GWA1700 power supply; The connection cable from the plate to the device powering it is included in the plate package.
Codes not held as stock, for delivery times contact your local representative.
FEATURES: matt finish, metallic effect. The plate has a dot-matrix display on the upper portion, RGB LED strips (along the outer and inner edges at the top and bottom) and a proximity sensor. APPLICATIONS: visualisation of dynamic icons on the display indicating the functions associated with the devices installed in the plate; event/alarm signalling using the display (messages) and/or RGB led strips. NOTES: The plate must be supplied with power by one of the following connected devices, which must be installed in the same box as the plate: GWA1201, GWA1202, GWA1231, GWA1232, GWA1241, GWA1242 or GW1x826, or by a dedicated GWA1700 power supply; The connection cable from the plate to the device powering it is included in the plate package.
Codes not held as stock, for delivery times contact your local representative.
FEATURES: matt finish, metallic effect. The plate has a dot-matrix display on the upper portion, RGB LED strips (along the outer and inner edges at the top and bottom) and a proximity sensor. APPLICATIONS: visualisation of dynamic icons on the display indicating the functions associated with the devices installed in the plate; event/alarm signalling using the display (messages) and/or RGB led strips. NOTES: The plate must be supplied with power by one of the following connected devices, which must be installed in the same box as the plate: GWA1201, GWA1202, GWA1231, GWA1232, GWA1241, GWA1242 or GW1x826, or by a dedicated GWA1700 power supply; The connection cable from the plate to the device powering it is included in the plate package.
Codes not held as stock, for delivery times contact your local representative.
FEATURES: matt finish, metallic effect. The plate has a dot-matrix display on the upper portion, RGB LED strips (along the outer and inner edges at the top and bottom) and a proximity sensor. APPLICATIONS: visualisation of dynamic icons on the display indicating the functions associated with the devices installed in the plate; event/alarm signalling using the display (messages) and/or RGB led strips. NOTES: The plate must be supplied with power by one of the following connected devices, which must be installed in the same box as the plate: GWA1201, GWA1202, GWA1231, GWA1232, GWA1241, GWA1242 or GW1x826, or by a dedicated GWA1700 power supply; The connection cable from the plate to the device powering it is included in the plate package.
Codes not held as stock, for delivery times contact your local representative.
FEATURES: matt finish, metallic effect. The plate has a dot-matrix display on the upper portion, RGB LED strips (along the outer and inner edges at the top and bottom) and a proximity sensor. APPLICATIONS: visualisation of dynamic icons on the display indicating the functions associated with the devices installed in the plate; event/alarm signalling using the display (messages) and/or RGB led strips. NOTES: The plate must be supplied with power by one of the following connected devices, which must be installed in the same box as the plate: GWA1201, GWA1202, GWA1231, GWA1232, GWA1241, GWA1242 or GW1x826, or by a dedicated GWA1700 power supply; The connection cable from the plate to the device powering it is included in the plate package.
Codes not held as stock, for delivery times contact your local representative.
Accessories for Ego Smart and Ego Smart International plates
Power supply and connection
Power and communication unit for EGO SMART plate - ZigBee
CHARACTERISTICS: device for power supply and communication of the EGO SMART plates. NOTES: the device must be placed in the flush-mounting box where the EGO SMART plate it powers is installed; installable in ChoruSmart supports using the blanking module GW1x750. The connection between device and the EGO SMART plate must be made using the cable supplied in the EGO SMART packaging.
This device is unnecessary if one of the following devices is already present in the Smart plate box: GWA1201, GWA1202, GWA1231, GWA1232, GWA1241, GWA1242, GW1x826 (any of these devices can power the EGO SMART plate).
CHARACTERISTICS: specific supports for 3 and 4 module Italian standard EGO SMART plates; supports are also compatible with the other Italian standard ChoruSmart 3 and 4 module plates ONE, GEO, LUX, ICE and EGO.
Supports for square and round boxes
International standard supports for EGO SMART plates
FEATURES: GW16821N equipped with fixing clutches for installation on round boxes. Supports specifically for international standard EGO SMART plates; the supports are also compatible with the other ChoruSmart international standard plates, including ONE, GEO, LUX and EGO. NOTES: GW16822N support can be installed on single round and square boxes or in a horizontal composition; the GW16821N support can be installed on single stand-alone round boxes.
Protective covers for painting
Protective covers for painting, for CHORUSMART range, Italian Standard
Błąd podczas wysyłania żądania.
Prosimy, spróbuj później!
Dziękuję!
Twoja prośba została wysłana pomylśnie
✕
Twoja prywatność jest dla nas ważna.
Firma Gewiss wykorzystuje własne techniczne pliki cookie oraz pliki cookie podmiotów zewnętrznych w celu zapewnienia prawidłowego funkcjonowania witryny oraz do celów statystycznych, a także, za zgodą użytkownika, profilowane pliki cookie w celu zapewnienia spersonalizowanych wrażeń i reklam ukierunkowanych na podstawie analizy nawigacji użytkownika. Klikając „Akceptuj wszystkie”, wyrażasz zgodę na wszystkie pliki cookie profilujące Jeśli zamkniesz ten baner, klikając „X”, możesz kontynuować przeglądanie bez instalowania profilujących plików cookie. Zawsze możesz zmienić swoje preferencje, korzystając z funkcji oferowanych przez Gewiss, przechodząc do strony „Polityka plików cookie” za pośrednictwem łącza w stopce u dołu każdej strony na Witrynie. Więcej informacji można znaleźć w naszej Polityce prywatności i Polityce plików cookie.
Firma Gewiss i niektóre podmioty zewnętrzne wykorzystują pliki cookie znajdujące się na stronie „gewiss.com”.
Firma Gewiss wykorzystuje własne techniczne pliki cookie oraz pliki cookie podmiotów zewnętrznych w celu zapewnienia prawidłowego funkcjonowania witryny oraz do celów statystycznych, a także, za zgodą użytkownika, profilowane pliki cookie w celu zapewnienia spersonalizowanych wrażeń i reklam ukierunkowanych na podstawie analizy nawigacji użytkownika. Klikając „Zezwól na wszystkie”, wyrażasz zgodę na wszystkie pliki cookie profilujące
Zarządzaj preferencjami:
+
Techniczne pliki cookie
technical
Techniczne pliki cookie są niezbędne do umożliwienia korzystania ze strony internetowej, na przykład poprzez umożliwienie dostępu do obszarów chronionych. Zgoda użytkownika nie jest wymagana do ich funkcjonowania. Bez tych plików cookie prawidłowe poruszanie się po stronie internetowej może być trudne lub niemożliwe.
+
Funkcjonalne pliki cookie
Funkcjonalne pliki cookie umożliwiają stronie internetowej przechowywanie informacji, które wpływają na jej zachowanie lub wygląd na podstawie żądań użytkowników. Do ich funkcjonowania wymagana jest zgoda użytkownika.
+
Statystyczne pliki cookie
Statystyczne pliki cookie pozwalają nam zrozumieć, w jaki sposób użytkownicy korzystają ze strony internetowej, wspierając Administratora w zrozumieniu głównych form interakcji. Do ich funkcjonowania wymagana jest zgoda użytkownika.
+
Marketingowe pliki cookie
Marketingowe pliki cookie służą do śledzenia odwiedzających, na przykład do prezentowania treści interesujących indywidualnego użytkownika. Do ich funkcjonowania wymagana jest zgoda użytkownika.
Wymagane pole
Check that the e-mail is not already used or that all the fields have been enhanced
Sprawdź swój email
hasło musi zawierać od 6 do 12 znaków, cyfrę oraz literę
Rejestracja została pomyślnie zakończona
Uwaga: Niepoprawna nazwa użytkownika i/lub hasło
Wprowadź poprawny adres e-mail
niezgodna wartość
Modyfikacja danych została pomyślnie zakończona
To fill the form you must be logged. Please go to
login page
e-mail/ wiadomość wysłana pomylśnie
Wpisany
Dziękuję!
Twoja prośba została wysłana pomylśnie
Błąd uwierzytelniania
Błąd podczas wysyłania żądania
Prosimy, spróbuj później!
Użytkownik nie znaleziony
Błąd integracji
Skontaktuj się z administratorem
Jesteś już zarejestrowany na wydarzeniu
Sprawdź kartę
Zmiana hasła została pomyślnie zakończona
hasło musi zawierać od 6 do 12 znaków, cyfrę oraz literę
Wpisz wiadomość w odpowiednim polu
Błąd podczas wysyłania żądania. Prosimy, spróbuj później!
Zapisz na liście
Wstaw nazwę katalogu
Przedawniony
Aby pobrać plik, musisz wybrać odpowiedni profil podczas rejestracji, przejdź do modyfikacji i zmień profil
Aby pobrać plik, musisz być zalogowany jako instalator lub hurtownik. Zmień profil.
For the download of the file you have to be a professionist installer or wholesaler, a designer or lighting designer. Upgrade your profile on my profile page!
IDŹ
Podany kod jest niedostępny, spróbuj się zalogować
The date must be of the indicated format
Lista
Stworzone przez
Select
Account not yet confirmed, please confirm the link we sent you by mail