RESTART RM PRO - TO BE COUPLED WITH MDC - 4 POLES - 1P+N/2P/4P Idn=0,03 A 230 V - 3 MODULES EN 50022
Code:
GW90986
Range: 90 ReStart Range
Automatic reclosing devices
In the event the switch trips, the ReStart devices, after checking the system status, restore the power supply thereby ensuring maximum continuity of service in complete safety.
Available for both residual current circuit breakers and residual current circuit breakers with overcurrent protection, the range is characterized by the Autotest functions, with periodic and automatic control of the residual current protection without interrupting the power supply and PRO with extended control of the system.
Available for both residual current circuit breakers and residual current circuit breakers with overcurrent protection, the range is characterized by the Autotest functions, with periodic and automatic control of the residual current protection without interrupting the power supply and PRO with extended control of the system.
Technical Info
Information
Download
Software
Certificates
Description
Automatic reclosing device
Code
ReStart Rm PRO 4P
Suitable for
RCBO's MDC - 1P+N/2P/4P - 30 mA
Rated voltage AC
230 V
Rated current
6 - 10 - 13 - 16 - 20 -25 - 32 A
No. modules
3
Standard
EN 50557
Rated frequency (Hz)
50Hz
Distribution system
TT - TN-S
Rated non-operating resistance between live parts and earth (Rdo)
8kΩ
Insulation voltage (Ui)
500 V
Rated operating resistance between live parts and earth (Rd)
16 kΩ
Rated impulse
withstand voltage (Uimp) 4 kV
withstand voltage (Uimp) 4 kV
Maximum operating frequency
30 oper./h
Overvoltage category
III
Mechanical endurance
4000
Dielectric strength test voltage between pole and earth
2500 Vac for 1 minute
Type of residual current protection
AC - A - A[IR]
Rated residual operating current
30 mA
Operating temperature
-25 +60 °C
Stocking temperature
-40 +70 °C
Type of contacts
Photomos (potential free)
Voltage operating
5-230 V ac/dc
Current operating
0.6mA (min)-100mA cosϕ=1 (max)
Operating frequency
50 Hz
Use category
AC12
Operating modes
NO/NC/NO with handle position signalling function
Rated tightening torque
0,4 Nm
Terminal section
≤ 2,5 mm²
Automatic reclosure for untimely tripping
Yes
Earth failure test
Yes
Continuous system monitoring
Yes
Completeable
with GWD0951 Auxiliary contact - GW90992 RS485 BUS Module
with GWD0951 Auxiliary contact - GW90992 RS485 BUS Module
Electrocod
1413
Ware Number
85362010
EQUIPMENT AND NOTES
CHARACTERISTICS: after RCBO has tripped, ReStart checks the insulation and the short circuit prior to the automatic reclosure. In the event of a fault (earth leakage), ReStart will not reset the circuit breaker but will continue to monitor the circuit every 2 minutes reclosing the circuit breaker when safe to do so. In the meantime the integrated configurable auxiliary contact will change state to indicate that the automatic reset did not take place.
Compatible with:
- GW90992 ModBus RS485 interface module
NOTE: the ARD must be supplied at 230 Vac phase-neutral.
Compatible with:
- GW90992 ModBus RS485 interface module
NOTE: the ARD must be supplied at 230 Vac phase-neutral.
services
Do you need technical assistance?
Contact us to get the answers to your questions: plant, regulatory or product questions.
Find Gewiss
Are you looking for an installer or a sales point?
Find your trusted dealer or installer.
Are you not sure of what you need?
Let's find it together
You can enter the Gewiss world by consulting the sites available for each country, differentiated by language, services, and catalogue offerings
Choose your country
