42 RV Range Surface and flush-mounting watertight emergency enclosures
IP55 watertight enclosures, Red RAL 3000, available in 5 versions: with backlit push button; can be equipped with 22 mm dia. stop button or with rail coupling, the latter being available in Grey RAL 7035. The best seller is the GW42201, equipped with 1 NO contact and 1 NC contact and expandable up to 4 contacts, supplied with 1 long automatically operated push-button when glass is broken or short button for manual operation.
YOUR SEARCH
42 RV - Watertight enclosures for emergency manoeuvres - IP55
Equipment with illuminable push-button
Watertight enclosure for emergency systems, equipped with illuminated push-button and 2 contacts 1NO+1NC that can be expanded up to 4 contacts Pre-arrangement for use of green LED to indicate the good condition of the emergency circuit
CHARACTERISTICS: can be mounted on flush-mounting box GW24403. Contact-holder flange with 4 seats. ACCESSORIES SUPPLIED: substitute button key for the possible configuration of manual or automatic activation when the glass is broken, self-adhesive pictograms "Break the glass" and "Press the button key", screwcaps for double insulation, screws and accessories for plumbing the front, 1 NO contact and 1 NC contact. Sicur Push breakable glass. NOTES: substitute NO contacts: GW74201, NC: GW74202: lamps for push-button backlighting: GW30951 12 V~/-, GW30952 24 V~/-, GW30943 230 V~/-; green LEDs for signalling the integrity of the emergency circuit: GW30958 for 12 to 24 V~/-, GW30959 for 110 to 230 V~/-, GW30960 for 48 V~/-; To restore the double insulation use the relative screwcaps supplied. Pre-arranged for installation of 4 contacts type NO or NC.
Fitted with hole Ø 22 mm
Watertight enclosure for emergency systems fitted with hole Ø 22mm
ACCESSORIES SUPPLIED: Door fitted with lock with 2 keys, self adhesive pictogram "Break glass" and screwcaps for double insulation. Sicur Push breakable glass. To restore the double insulation, use the relative accessories supplied (module masks and screwcaps) or the brackets for surface-mounting (GW44621). NOTES: compatible with momentary push-buttons, selectors and indicators Ø 22 mm of the 74 PS series.
With DIN rail
Watertight enclosures for emergency use and special applications with rail DIN
ACCESSORIES SUPPLIED: door fitted with lock with 2 keys, self adhesive pictogram "Break glass", circuit label and screwcaps for double insulation. Sicur Push breakable glass. GW44207 pre-arranged also for the installation of momentary push-buttons, mushroom-head push-buttons, selectors and indicators ø 22 mm of the 74PS series. NOTES: Dispersible power calculated according to CEI 23-49. To restore the double insulation use the relative accessories supplied (module mask and screwcaps) or brackets for surface mounting GW44621.
With back-mounting plate
Watertight enclosure for emergency use and special applications with galvanised metal back mounting plate
ACCESSORIES SUPPLIED: Door fitted with lock with 2 keys, self adhesive pictogram "Break glass" and screwcaps for double insulation. "Sicur Push" breakable glass. To restore the double insulation use the relative accessories supplied (module mask and screwcaps) or brackets for surface mounting GW44621
Flush-mounting enclosure with DIN rail
Watertight flush-mounting enclosures for emergencies and special applications with rail DIN
ACCESSORIES SUPPLIED: door equipped with security lock with 1 key, self-adhesive pictogram "Break the glass", user label. "Sicur Push" breakable glass. NOTES: if the flush-mounting box is not embedded in line with the wall, use the screw kit plus the spacers GW48645. dispersible power calculated according to IEC 60670-24. To restore the double insulation use the relative accessories supplied (module masks and screwcaps)
Plates for lifts / emergency
Wired plates for lift and emergency
Self-supporting wired plates for lift/emergency with illuminable button switch triangle key and breakable glass - IP40
The articles are supplied with an 11mm button key already assembled, without a lamp. They use the GW30941 12V-/~, GW30942 24V-/~ and GW30943 230V-/~ signalling units. CHARACTERISTICS: the plates are suitable for the GW40422 security lock, available as an accessory. For flush-mounting box GW24403; for surface-mounting box GW32431, GW32432; ACCESSORIES SUPPLIED: accessory button key, 17mm high, to operate the contacts when glass is broken.
CHARACTERISTICS: GW74202, suitable for opening the contact also in the event of it slightly sticking, in conformity with the EN 60947-5-1 standard. Clip assembly on the contact-holder flanges. Contacts compatible with emergency control unit GW42201.
Cylindrical security lock - suitable for plates used in lifts/emergencies
APPLICATIONS: used to maintain the double insulation and the original IP degree of protection of the boxes, containers and other GEWISS products. ACCESSORIES SUPPLIED: 2 fixing screws.
We use technical cookies for optimum navigation. By continuing, you agree to use cookies, otherwise you can disable them from your browser.
Field required
Check that the e-mail is not already used or that all the fields have been enhanced
Check your email
The password must contain at least 6 and a maximum of 12 characters, a numeric character and a uppercase letter
Registration is successfully completed
Attention: User name and password do not match
Enter a valid email address
The value does not match
Data modification is successfully completed
To fill the form you must be logged. Please go to
login page
Mail sent successfully
Inscribed
Thank you!
Your request has been sent successfully
Authentication error
Error sending request
Please try again later!
User not found
Integration error
Please contact the administrator
You are already registered at the event
View card
Change Password is successfully completed
The password must contain at least 6 and a maximum of 12 characters, a numeric character and a uppercase letter
Please enter the mail in the appropriate field
Error sending request. Please try again later!
Saving in the list
Insert the name of the catalog
Expired
For the download of the file you have to choose a subtype during registration, go on modify profile and choose it!
For the download of the file you have to be a professionist installer or wholesaler. Upgrade your profile on my profile page!
For the download of the file you have to be a professionist installer or wholesaler, a designer or lighting designer. Upgrade your profile on my profile page!
GO
Verify code is expired, please try to login
The date must be of the indicated format
List
Created by
Select
Account not yet confirmed, please confirm the link we sent you by mail