47 BUSBAR Range Distribution systems for distribution boards

CHARACTERISTICS: fixed quick connection on the rear of the double DIN rail.
NOTE: possibility to combine two 12-module bars on a single 24-module DIN rail.

NOTE: GW49779 connection also suitable for MTC 3P, thanks to the pre-breaking of the neutral.
SE= red lever switch-disconnector.

NOTE: SE= red lever switch-disconnector.

NOTE: cable section: 25 mm².

NOTE: cable section: 25 mm².

CHARACTERISTICS: the single-pole power supply modules are terminals without cable, to plug-in on bar frame, that allow the connection of main circuit breaker with bar frame when the width L=350mm or the connection of two bar frames when width L=600mm or the connection of modular devices when In=63A.

ACCESSORIES SUPPLIED: conductors with terminal for quick coupling: length 120mm, nominal section 6mm², rated current In=40A, type H07 VK.
width 24 modules: 12 black conductors, 6 blue conductors; width 36 modules: 18 black conductors, 12 blue conductors.
CHARACTERISTICS: suitable for installation between panels with windows, 200mm pitch.

NOTES: length= 120 mm crimped terminal. Length= 500 mm terminal without stripping.

CHARACTERISTICS: the connection capacity indicated is "per pole"; can also be fixed on the back-mounting plate.
ACCESSORIES SUPPLIED: fixing brackets on functional profile. Complete with protection shield and bolts and screws for cable input and output connections.
NOTES: usable with front panel of a height greater than, or equal to, 200mm.

CHARACTERISTICS: the indicated connection capacity is "per pole"; can also be fixed on the back-mounting plate.
ACCESSORIES SUPPLIED: fixing brackets on functional profile. Complete with protection shield and bolts and screws for cable input and output connections.
NOTES: an be used with front panel of a height greater than, or equal to, 200mm.
GW45547 and GW45548 are not suitable for P=200 mm QDX 630L and P=250 mm QDX630H distribution boards.

CHARACTERISTICS: terminal tightening torque: input cable 4 Nm, output cables 1.5 Nm.
APPLICATIONS: possibility to create 1, 2, 3 and 4-pole distributing frames.

CHARACTERISTICS: the indicated connection capacity is "per pole" and refers to the fitting of cables with "test prods".

CHARACTERISTICS: terminal tightening torque: input cables 4 Nm, output cables 1.5 Nm.
the indicated connection capacity is "per pole" and refers to the fitting of cables with "test prods".

NOTE: from GW45551 to GW45558: M6 threaded busbars. GW49678 and GW49680: 10.5 mm through hole busbars.

ACCESSORIES SUPPLIED: Crosspieces and fixing screw to the structure.

ACCESSORIES SUPPLIED: Crosspieces and fixing screw to the structure.

CHARACTERISTICS: conductor in electrolytic copper with high resistance compound vinyl insulation (duty voltage 1000 V).

APPLICATIONS: joints for connecting vertical and horizontal busbars.
CHARACTERISTICS: kit consisting of
: - 4 copper joints (section 50x10) of length 100 mm
- no. 32 hammer screws, washers and nuts.

APPLICATIONS: joints for connecting vertical and horizontal busbars.
CHARACTERISTICS: kit consisting of
: - 4 aluminium joints of length
: - 95 mm (phase 1)
   - 125 mm (phase 2)
   - 155 mm (phase 3)
   - 185 mm (neutral)
- no. 12 hammer screws, washers and nuts for GWD3773 or no. 20 hammer screws, washers and nuts for GWD3774.

APPLICATIONS: joints for connecting the shaped bars (copper and aluminium) with cables with cable terminals.
CHARACTERISTICS: kit consisting of
:- no. 4 M6 drilled busbars
- no. 8 25x8 hammer screws, washers and nuts for fixing joints on the bars.

APPLICATIONS: brackets to hold the bars in vertical position.
CHARACTERISTICS: kit consisting of
:- 1 metal bracket
- 4 plastic bases
- 8 fixing screws
- 1 mounting crosspiece (one different for each code).

APPLICATIONS: adhesives to identify the phases (L1-L2-L3) and neutral (N) to be applied on copper and aluminium shaped bars.
NOTE: Quantities (10 pieces) refer to each individual phase for a total of 40 pieces.

NOTE: no. 20 hammer screws, washers and nuts.

NOTE: GWD3711 suitable for bars with 5mm thickness for linear bar holders.
GWD3712 suitable for 10mm thick busbars for linear busbar holders.