A complete system of IP65 boards for distributing energy in tertiary, commercial sector and building applications, available both empty and pre-wired, in accordance with the international standard IEC 61439. The Q-DIN range comprises boards from 5 to 20 DIN modules, plus supplementary modules of 14 or 20 M to add even more DIN spaces. They can accommodate flush-mounting socket-outlets and interlocked socket-outlets of up to 63 A, and they can be combined with numerous accessories.
ACCESSORIES SUPPLIED: cable clamp and 2 screw caps. GW68031N complete with rubber shockproof case. Adapter flange for every IEC 309 socket-outlet housing seat - 16/32 A. NOTES: key not installable. Dispersible power (B) is calculated according to IEC 60890 standard. It refers to the 40 K overtemperature, between the temperature inside and outside the board. The IP65 degree of protection is obtained with blank flange lid installed correctly on all the seats of the unwired board. External dimensions GW68017N (LxHxD): 105x258x96 mm. External dimensions GW68018N (LxHxD): 105x337x96 mm. External dimensions GW68001N and GW68020N (LxHxD): 105x430x96 mm. External dimensions GW68031N (LxHxD): 140x560x105 mm. Halogen-Free in accordance with Standard EN 60754-2.
ACCESSORIES SUPPLIED: cable clamp and 4 screw caps. Adapter flange for every IEC 309 socket-outlet housing seat - 16/32 A. NOTES: Dispersible power (B) is calculated according to IEC 60890 standard. It refers to the 40K overtemperature, between the temperature inside and outside the board. GW68003N: pre-arranged for two 16-32 A socket-outlets in the lower flanges and two 16A socket-outlets in the upper flanges. The IP65 degree of protection is obtained with blank flange lid installed correctly on all the seats of the unwired board. External dimensions (LxHxD): 220x435x96. Halogen-Free in accordance with Standard EN 60754-2.
ACCESSORIES SUPPLIED: cable clamp and 4 screw caps. Adapter flange for every IEC 309 socket-outlet housing seat - 16/32 A. NOTES: Dispersible power (B) is calculated according to IEC 60890 standard. It refers to the 40K overtemperature, between the temperature inside and outside the board. The IP65 degree of protection is obtained with blank flange lid installed correctly on all the seats of the unwired board. External dimensions (LxHxD): 320x360x120. Halogen-Free in accordance with Standard EN 60754-2.
ACCESSORIES SUPPLIED: cable clamp and 4 screw caps. Adapter flange for every IEC 309 socket-outlet housing seat - 16/32 A. NOTES: Dispersible power (B) is calculated according to IEC 60890 standard. It refers to the 40K overtemperature, between the temperature inside and outside the board. The IP65 degree of protection is obtained with blank flange lid installed correctly on all the seats of the unwired board. External dimensions (LxHxD): 320x510x120. Halogen-Free in accordance with Standard EN 60754-2.
ACCESSORIES SUPPLIED: cable clamp and 6 screw caps. Adapter flange for every IEC 309 socket-outlet housing seat - 16/32 A. NOTES: Dispersible power (B) is calculated according to IEC 60890 standard. It refers to the 40K overtemperature, between the temperature inside and outside the board. The IP65 degree of protection is obtained with blank flange lid installed correctly on all the seats of the unwired board. External dimensions (LxHxD): 450x560x120. Halogen-Free in accordance with Standard EN 60754-2.
ACCESSORIES SUPPLIED: cable clamp and 6 screw caps. NOTES: Dispersible power (B) is calculated according to IEC 60890 standard. It refers to the 40K overtemperature, between the temperature inside and outside the board. GW68015N: the 4 flanges - measuring 85x75 - can be equipped with the COMBI-IN GW27401 and GW27403 watertight covers. The IP65 degree of protection is obtained with blank flange lid installed correctly on all the seats of the unwired board. External dimensions (LxHxD): 450x560x120. Halogen-Free in accordance with Standard EN 60754-2.
NOTES: to be used with Q-DIN 14 and 20 M to double the DIN modules available. the dispersible power is calculated according to the document IEC 60890 (CEI 17-43) and refers to an overtemperature of 40K between the air temperature inside the board and in the room. External dimensions GW68023N (LxHxD): 320x241x120. External dimensions GW68024N (LxHxD): 450x241x120. Halogen-Free in accordance with Standard EN 60754-2.
Complementary items
Yellow-painted metal conduit support with support for cables of up to 20 m
NOTES: the type of cable considered is H 07 RN - F 5 x 4 mm²; the length varies according to the type of cable. GW68433: Q-DIN protection system against the front drops.
Metal carrier painted in yellow equipped with two wheels and rotating drum to wind up to 50 m of cable
NOTES: the type of cable considered is H 07 RN - F 5 x 4 mm²; the length varies according to the type of cable. 1+1 flanges for socket-outlets IEC 309 16A and 32A.
CHARACTERISTICS: fixed on the back of the boards. The maximum sustainable load values refer to Q-DIN boards. APPLICATIONS: for application of boards on poles from 60 to 80mm. ACCESSORIES SUPPLIED: 2 pieces. For the correct use of the kit, see the instructions sheet.
NOTES: GW44621: used to maintain the double insulation and the original IP degree of protection of the boxes, containers and other GEWISS products. GW46446 and GW46451: set composed of 4 brackets. Maximum sustainable load 8 kg for Q-DIN10, 12 kg for Q-DIN14 and 15 kg for Q-DIN20.
CHARACTERISTICS: domestic socket-outlets equipped with child protection (shutter) and with rear connection. NOTES: domestic socket-outlets 50x50 mm can be installed also on flanges 85x75 mm using the adapter code GW68281.
CHARACTERISTICS: GW74502 suitable for contact opening also in the event of slight sticking, in compliance with Standard EN 60947-5-1. Clip assembly on the contact-holder flanges. NOTES: the dual contacts type: GW74503, GW74504 and GW74505 are not compatible with the watertight emergency enclosures GW42204 and GW42207.
APPLICATIONS: the flange of 85x75 mm dimension is suited for mounting IEC 309 16 A socket-outlets and COMBI-IN GW27401 and GW27403 flange; the flange of 95x80 mm dimension is suited for IEC 309 16 -32 A socket-outlets. ACCESSORIES SUPPLIED: 1 blank flange - blue - 16 A; 1 blank flange - blue 16 -32 A; 3 gaskets and fixing screws.
APPLICATIONS: GW66715N to assemble all the vertical socket-outlets 16-32 A IP67 of the 67 IB range on the Q-DIN boards, or on the modular bases of the previous versions for socket-outlets 16-32 A CBF IP55. GW66716N to assemble the vertical socket-outlets 63A IP67 of the 67 IB range on the modular bases of the previous versions for socket-outlets 63A CBF IP55.
COMBI-IN watertight covers for 2 System range modules
ACCESSORIES SUPPLIED: fixing screws. The 80 A terminal blocks are equipped with N and E labels to be placed on the respective spaces to identify the poles. CHARACTERISTICS: GWT 960°C according to EN60695-2-11. INSTALLATION: the installation of the GW40401, GW40408B and GW40408U terminal blocks on Q-DIN 14/20 boards is permitted by using the GW40413 adapter.
ACCESSORIES SUPPLIED: fixing screws. CHARACTERISTICS: the adapter is pre-drilled for the correct assembly of the terminal block. INSTALLATION: permits installation of the GW40401, GW40408B and GW40408U terminal blocks on Q-DIN 14/20 boards.
CHARACTERISTICS: the transparent door is pre-arranged for the GW40422 security lock. ACCESSORIES SUPPLIED: sealing gaskets for COMBIBLOC socket-outlets.
Blank covers for COMBIBLOC interlocked switched socket-outlets
ACCESSORIES SUPPLIED: fixing screws. The 80 A terminal blocks are equipped with N and E labels to be placed on the respective spaces to identify the poles. CHARACTERISTICS: GWT 960°C according to EN60695-2-11. INSTALLATION: the installation of the GW40401, GW40408B and GW40408U terminal blocks on the GW66493 board is permitted by using the GW40413 adapter.
ACCESSORIES SUPPLIED: fixing screws. CHARACTERISTICS: the adapter is pre-drilled for the correct assembly of the terminal block. INSTALLATION: it permits installation of the GW40401, GW40408B and GW40408U terminal blocks on the GW66493 board.
We use technical cookies for optimum navigation. By continuing, you agree to use cookies, otherwise you can disable them from your browser.
Field required
Check that the e-mail is not already used or that all the fields have been enhanced
Check your email
The password must contain at least 6 and a maximum of 12 characters, a numeric character and a uppercase letter
Registration is successfully completed
Attention: User name and password do not match
Enter a valid email address
The value does not match
Data modification is successfully completed
To fill the form you must be logged. Please go to
login page
Mail sent successfully
Inscribed
Thank you!
Your request has been sent successfully
Authentication error
Error sending request
Please try again later!
User not found
Integration error
Please contact the administrator
You are already registered at the event
View card
Change Password is successfully completed
The password must contain at least 6 and a maximum of 12 characters, a numeric character and a uppercase letter
Please enter the mail in the appropriate field
Error sending request. Please try again later!
Saving in the list
Insert the name of the catalog
Expired
For the download of the file you have to choose a subtype during registration, go on modify profile and choose it!
For the download of the file you have to be a professionist installer or wholesaler. Upgrade your profile on my profile page!
For the download of the file you have to be a professionist installer or wholesaler, a designer or lighting designer. Upgrade your profile on my profile page!
GO
Verify code is expired, please try to login
The date must be of the indicated format
List
Created by
Select
Account not yet confirmed, please confirm the link we sent you by mail
